wmprofiles.c

pxa270平台 windows mobile 5.2 wm9713 触摸屏+音频驱动

/*-----------------------------------------------------------------------------
 * Copyright (c) Wolfson Microelectronics plc.  All rights reserved.
 *
 * This software as well as any related documentation is furnished under 
 * license and may only be used or copied in accordance with the terms of the 
 * license. The information in this file is furnished for informational use 
 * only, is subject to change without notice, and should not be construed as 
 * a commitment by Wolfson Microelectronics plc. Wolfson Microelectronics plc
 * assumes no responsibility or liability for any errors or inaccuracies that
 * may appear in this document or any software that may be provided in
 * association with this document. 
 *
 * Except as permitted by such license, no part of this document may be 
 * reproduced, stored in a retrieval system, or transmitted in any form or by 
 * any means without the express written consent of Wolfson Microelectronics plc. 
 *
 * $Id: WMProfiles.c 4254 2006-10-26 11:04:01Z fb $
 *
 * This file contains the profile interface, which allows standard
 * configurations to be prepared in advance and loaded with a single
 * function call.
 *
 * Warning:
 *  This driver is specifically written for Wolfson Codecs. It is not a 
 *  general CODEC device driver.
 *
 *---------------------------------------------------------------------------*/

/*
 * Include files
 */
#include "WMCommon.h"
#include "WMProfiles.h"
#include "WMControlLink.h"
#include <ctype.h>

/*
 * Global definitions
 */

/*
 * Function prototypes
 */
static const WM_PROFILE *private_FindProfile( const char        *name,
                                              WM_CHIPTYPE       deviceType,
                                              const WM_PROFILE  *profiles,
                                              unsigned int      nProfiles
                                            );
static WM_BOOL private_NamesMatch( const char *name1, const char *name2 );

/*-----------------------------------------------------------------------------
 * Function:    WMLoadProfile
 *
 * Loads a pre-prepared configuration (set of register settings/changes)
 * to the device.
 *
 * Note:
 *  - if there is an action with an unrecognised action field, or if there
 *    is a bad parameter to a recognised action, all other actions will
 *    still be executed and this function will effectively skip over the
 *    bad one(s).
 * 
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      pActions            The actions to take
 *      nActions            Number of actions in the pActions array
 *
 * Returns:     WMSTATUS
 *      The first error status, or WMS_SUCCESS if all actions completed
 *      successfully.  Note: even if this function returns an error status,
 *      some actions may have been executed.
 *---------------------------------------------------------------------------*/
WMSTATUS WMLoadProfile( WM_DEVICE_HANDLE    hDevice,
                        const WM_ACTION     *pActions,
                        unsigned int        nActions
                      )
{
    WMSTATUS        status = WMS_SUCCESS;
    unsigned int    action;
    const WM_ACTION *pAction;

    /*
     * Run through the actions, doing each in turn.
     */
    for ( action = 0; action < nActions; action++ )
    {
        WMSTATUS newStatus = WMS_SUCCESS;
        
        pAction = &pActions[action];
        
        /*
        WM_TRACE( hDevice, ( "%d: 0x%X => 0x%X & 0x%X",
                             pAction->action,
                             pAction->dest.reg,
                             pAction->val.uintval,
                             pAction->mask
                ) );
        */

        switch ( pAction->action )
        {
            case WMA_WRITE:
                if ( 0xFFFF == pAction->mask )
                {
                    newStatus = WMWrite( hDevice, pAction->dest.reg, pAction->val.regval );
                    if ( WM_ERROR( newStatus ) )
                    {
                        WM_TRACE( hDevice, (
                                  "pActions[%d]: write 0x%X to R%02xh failed: %s",
                                  action,
                                  pAction->val.regval,
                                  pAction->dest.reg,
                                  WMStatusText( newStatus )
                                ));
                    }
                }
                else
                {
                    newStatus = WMSetField( hDevice,
                                            pAction->dest.reg,
                                            pAction->val.regval,
                                            pAction->mask
                                          );
                    if ( WM_ERROR( newStatus ) )
                    {
                        WM_TRACE( hDevice, (
                                  "pActions[%d]: setfield 0x%X (mask 0x%X) to R%02xh failed: %s",
                                  action,
                                  pAction->val.regval,
                                  pAction->mask,
                                  pAction->dest.reg,
                                  WMStatusText( newStatus )
                                ));
                    }
                }
                break;

            case WMA_RESET:
                newStatus = WMReset( hDevice );
                if ( WM_ERROR( newStatus ) )
                {
                    WM_TRACE( hDevice, (
                              "pActions[%d]: reset failed: %s",
                              action,
                              WMStatusText( newStatus )
                            ));
                }
                break;

            case WMA_WAKE:
                newStatus = WMWake( hDevice );
                if ( WM_ERROR( newStatus ) )
                {
                    WM_TRACE( hDevice, (
                              "pActions[%d]: wake failed: %s",
                              action,
                              WMStatusText( newStatus )
                            ));
                }
                break;

            case WMA_SLEEP:
                MilliSleep( hDevice, pAction->val.uintval );
                newStatus = WMS_SUCCESS;
                break;

            case WMA_POWERUP:
                if ( WM_POWER_VREF & pAction->val.uintval )
                {
                    newStatus = WMPowerInit( hDevice, WM_DRIVER_RAW );
                    if ( WM_ERROR( newStatus ) )
                    {
                        WM_TRACE( hDevice, (
                                  "pActions[%d]: power up of 0x%X failed: %s",
                                  action,
                                  pAction->val.uintval,
                                  WMStatusText( newStatus )
                                ));
                    }
                }
                newStatus = WMPowerUp( hDevice, WM_DRIVER_RAW, pAction->val.uintval );
                if ( WM_ERROR( newStatus ) )
                {
                    WM_TRACE( hDevice, (
                              "pActions[%d]: power up of 0x%X failed: %s",
                              action,
                              pAction->val.uintval,
                              WMStatusText( newStatus )
                            ));
                }
                break;

            case WMA_POWERDOWN:
                newStatus = WMPowerDown( hDevice, WM_DRIVER_RAW, pAction->val.uintval );
                if ( WM_ERROR( newStatus ) )
                {
                    WM_TRACE( hDevice, (
                              "pActions[%d]: power down of 0x%X failed: %s",
                              action,
                              pAction->val.uintval,
                              WMStatusText( newStatus )
                            ));
                }
                break;
#if WM_AUDIO
            case WMA_ENABLE_STREAM:
                newStatus = WMAudioEnableStream( hDevice, pAction->val.uintval );
                if ( WM_ERROR( newStatus ) )
                {
                    WM_TRACE( hDevice, (
                              "pActions[%d]: enable of stream %d failed: %s",
                              action,
                              pAction->val.uintval,
                              WMStatusText( newStatus )
                            ));
                }
                break;

            case WMA_DISABLE_STREAM:
                newStatus = WMAudioDisableStream( hDevice, pAction->val.uintval );
                if ( WM_ERROR( newStatus ) )
                {
                    WM_TRACE( hDevice, (
                              "pActions[%d]: disable of stream %d failed: %s",
                              action,
                              pAction->val.uintval,
                              WMStatusText( newStatus )
                            ));