wmgpio.c

pxa270平台 windows mobile 5.2 wm9713 触摸屏+音频驱动

    }

finish:
    return retval;
}

/*-----------------------------------------------------------------------------
 * Function:    WMGPIOClearInput
 *
 * Clear the status of the GPIO.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      gpio                the GPIO to clear.
 *
 * Returns:     WMSTATUS
 *		See WMStatus.h.
 *		<values/meanings>
 *---------------------------------------------------------------------------*/
WMSTATUS WMGPIOClearInput( WM_DEVICE_HANDLE hDevice, 
                           WM_GPIO_PIN gpio
                         )
{
    WMSTATUS              status = WMS_UNSUPPORTED;
    WM_GPIO_PIN           gpioPin = WM_GPIO_NONE;
    WM_REGVAL             regval;
    const WM_GPIO_DETAILS *pGPIODetails = NULL;

    /* 
     * Get the GPIO details 
     */
    pGPIODetails = private_GPIODetails( hDevice, gpio );

    if ( pGPIODetails == NULL )
    {
        goto finish;
    }

    gpioPin = pGPIODetails->gpioPin;

#ifdef DEBUG
    /*
     * Check to make sure that this is an input.
     */
    if ( ! private_GPIOIsInput( hDevice, gpioPin ) )
    {
        status = WMS_WRONG_MODE;
        goto finish;
    }
#endif /* DEBUG */

    /*
     * Read the current value.
     */
    status = WMRead( hDevice, WM97_GPIO_PIN_STATUS, &regval );
    if ( WM_ERROR( status ) )
    {
        WM_TRACE( hDevice, ( "WMGPIOClearInput: read failed: 0%s\n",
            WMStatusText( status ) ) );
        goto finish;
    }
    
    /*
     * Now clear the bit.
     */
    regval &= ~gpioPin;
	if ( WM_IS_AC97( hDevice ) )
	{
    	status = WMPlatformACLinkClearGPIOInput( hDevice, regval );
	}

finish:
    return status;
}

/*-----------------------------------------------------------------------------
 * Function:    WMGPIOHasAltFunc
 *
 * Does this GPIO have an alternate function.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      gpio                the GPIO to check.
 *
 * Returns:     WMSTATUS
 *                          WMS_RETURN_TRUE if the GPIO has an alternate
 *                          function.
 *                          WMS_RETURN_FALSE if the GPIO does not 
 *                          have an alternate function.
 *                          WMS_UNSUPPORTED if the GPIO is not available
 *                          on this device.
 *                          See WMStatus.h for all other values and meanings.
 *---------------------------------------------------------------------------*/
WMSTATUS WMGPIOHasAltFunc( WM_DEVICE_HANDLE hDevice, 
                           WM_GPIO_PIN gpio
                         )
{
    WMSTATUS              status = WMS_UNSUPPORTED;
    WM_GPIO_PIN           gpioAltFunc = WM_GPIO_NONE;
    const WM_GPIO_DETAILS *pGPIODetails = NULL;

    /* 
     * Get the GPIO details 
     */
    pGPIODetails = private_GPIODetails( hDevice, gpio );

    if ( pGPIODetails == NULL )
    {
        WM_ASSERT( hDevice, pGPIODetails == NULL );
        goto finish;
    }

    gpioAltFunc = pGPIODetails->gpioAltFunc;

    /* 
     * Check to see if this is an alternate function.
     */
    if ( WM_GPIO_NONE != gpioAltFunc )
    {
        status = WMS_RETURN_TRUE;
    }
    else
    {
        status = WMS_RETURN_FALSE;
    }

finish:
    return status;
}

/*-----------------------------------------------------------------------------
 * Function:    WMGPIOHasVirtualGPIO
 *
 * Does this GPIO have a virtual GPIO function.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      gpio                the GPIO to check.
 *
 * Returns:     WMSTATUS
 *                          WMS_RETURN_TRUE if the GPIO has a virtual
 *                          function.
 *                          WMS_RETURN_FALSE if the GPIO does not 
 *                          have a virtual function.
 *                          WMS_UNSUPPORTED if the GPIO is not available
 *                          on this device.
 *                          See WMStatus.h for all other values and meanings.
 *---------------------------------------------------------------------------*/
WMSTATUS WMGPIOHasVirtualGPIO( WM_DEVICE_HANDLE hDevice, 
                               WM_GPIO_PIN gpio
                             )
{
    WMSTATUS              status = WMS_UNSUPPORTED;
    WM_GPIO_PIN           gpioVirtualFunc = WM_GPIO_NONE;
    const WM_GPIO_DETAILS *pGPIODetails = NULL;

    /* 
     * Get the GPIO details 
     */
    pGPIODetails = private_GPIODetails( hDevice, gpio );

    if ( pGPIODetails == NULL )
    {
        WM_ASSERT( hDevice, pGPIODetails == NULL );
        goto finish;
    }

    gpioVirtualFunc = pGPIODetails->gpioVirtualFunc;

    /* 
     * Check to see if this is an Virtual GPIO.
     */
    if ( WM_GPIO_NONE != gpioVirtualFunc )
    {
        status = WMS_RETURN_TRUE;
    }
    else
    {
        status = WMS_RETURN_FALSE;
    }

finish:
    return status;
}

/*-----------------------------------------------------------------------------
 * Function:    private_GPIODetails
 *
 * Called to get the GPIO's details.
 *
 * Parameters:
 *      hDevice         The handle to the device (from WMOpenDevice).
 *      gpio            The GPIO we are interested in.
 *                      NOTE : This function will accept the GPIO name,
 *                             the GPIO alternate name or the virtual function
 *                             name.
 *
 * Returns:     const WM_GPIO_DETAILS *
 *       Pointer to the GPIO details, or NULL if no match.
 *---------------------------------------------------------------------------*/
const WM_GPIO_DETAILS *private_GPIODetails( WM_DEVICE_HANDLE hDevice,
                                            WM_GPIO_PIN gpio
                                          )
{
    const WM_CHIPDEF		*pChipDef = NULL;
    unsigned int			nGPIO = 0;

    /*
     * Look up our chipdef.
     */
    pChipDef = WMGetChipDef( hDevice );
    if ( !pChipDef )
    {
        goto error;
    }
    
    /*
     * Run through the gpio pins.
     */
    for ( nGPIO = 0; nGPIO < pChipDef->gpioCount; nGPIO++ )
    {
        if ( pChipDef->pGPIODetails[ nGPIO ].gpioPin == gpio )
        {
            /* Found it */
            return &pChipDef->pGPIODetails[ nGPIO ];
        }
    } 

    /*
     * If we get here, we failed.
     */    
error:
    return NULL;
}

/*-----------------------------------------------------------------------------
 * Function:    private_GPIOIsInput
 *
 * Check to see if the GPIO is configured as an input.
 *
 * Parameters:
 *      hDevice         The handle to the device (from WMOpenDevice).
 *      gpio            The GPIO we are interested in.
 *
 * Returns:     WM_BOOL
 *       TRUE if the GPIO is an input, FALSE if the GPIO is an output.
 *---------------------------------------------------------------------------*/
WM_BOOL private_GPIOIsInput( WM_DEVICE_HANDLE hDevice,
                             WM_GPIO_PIN gpio
                           )
{
    WM_BOOL retval = FALSE;
    WMSTATUS status;
    WM_REGVAL direction = 0;

    status = WMRead( hDevice, WM97_GPIO_PIN_CONFIG, &direction );

    if( WM_ERROR( status ) )
    {
        WM_ASSERT( hDevice, WM_SUCCESS( status ) );
        goto finish;
    }

    /*
     * If the direction bit is set to 1 for the GPIO
     * then this is an input.
     */
    if ( direction & gpio )
    {
        retval = TRUE;
    }

finish:
    return retval;

}

/*-----------------------------------------------------------------------------
 * Function:    private_GPIOWM9713EnableGPIOFunction
 *
 * Some of the GPIO pins can be used for diffrent purposes on the WM9713. 
 * This function enables or disables the pins to be used as GPIOs.
 *
 * NOTE: This function is untested and may be required at a later date
 *       externally.
 *
 * Parameters:
 *      hDevice         The handle to the device (from WMOpenDevice).
 *      gpio            The GPIO we are interested in.
 *      enable          set as GPIO if TRUE, set as non-GPIO if FALSE.
 *
 * Returns:     void
 *---------------------------------------------------------------------------*/
void private_GPIOWM9713EnableGPIOFunction( WM_DEVICE_HANDLE hDevice,
                                           WM_GPIO_PIN gpio,
                                           WM_BOOL enable
                                         )
{
    if ( IS_WM9713_FAMILY( hDevice ) )
    {
        WM_BOOL   pcm    = FALSE;
        WM_BOOL   resetb = FALSE;
        
        switch ( gpio )
        {
            case WM_GPIO_1:
            case WM_GPIO_3:
            case WM_GPIO_4:
            case WM_GPIO_5:
                pcm = TRUE;
                break;

            case WM_GPIO_7:
                resetb = TRUE;
                break;
        }


        if( pcm )
        {
            if( enable )
            {
                    WMClearField( hDevice, 
                                  WM9713_VOICE_CODEC_CONTROL, 
                                  WM_GPIO_VOICE_INTERFACE_ENABLE 
                                );
#if WM_VOICE
                    WM_TRACE( hDevice, 
                            ( "private_GPIOWM9713EnableGPIOFunction: "
                              "Disabled voice interface. "
                              "Are you sure you wanted to do this?"));                    
#endif
            }
            else
            {
                    WMSetField( hDevice, 
                                WM9713_VOICE_CODEC_CONTROL, 
                                WM_GPIO_VOICE_INTERFACE_ENABLE,
                                WM_GPIO_VOICE_INTERFACE_ENABLE 
                              );
            }
        }
        else if( resetb )
        {
            if( enable )
            {
                    WMSetField( hDevice, 
                                WM9713_ADD_FUN1, 
                                WM_GPIO_RESETB_DISABLE,
                                WM_GPIO_RESETB_DISABLE 
                              );
            }
            else
            {
                    WMClearField( hDevice, 
                                  WM9713_ADD_FUN1, 
                                  WM_GPIO_RESETB_DISABLE 
                                );
            }
        }

    }
}


#endif /* WM_GPIO_CONTROL */

/*------------------------------ END OF FILE ---------------------------------*/