wm8753power.c

pxa270平台 windows mobile 5.2 wm9713 触摸屏+音频驱动

    }
    else
#endif /* WM_CACHE_POWER_STATE */
    {

		/*
		 * Get the current power status of the device.
		 */
		for ( powerLoop = 0; powerLoop < WM8753_MAX_POWER_REGS; powerLoop++ )
		{
            status = WMRead( hDevice, powerReg++, &powerVal[powerLoop] );
            if ( WM_ERROR( status ) )
            {
                goto error;
            }
		}

#if WM_CACHE_POWER_STATE
        if ( pDeviceContext->v_pWMData )
        {
            pDeviceContext->v_pWMData->flags |= WM_POWERREG_VALID;
        }
#endif /* WM_CACHE_POWER_STATE */
    }

    /*
     * Disable audio.  All or nothing for now.
     * Recommended power-down sequence is
     */
    if ( powerDown & WM_POWER_AUDIO )
    {

		if ( powerDown & WM_POWER_OUTPUTS	)
        {
            powerVal[PWR_REG_3] &= ~WM8753_PWR3_OUTPUT;
        }

		if ( powerDown & WM_POWER_AUDIO_HIFI_DAC )
		{
            powerVal[PWR_REG_1] &= ~WM8753_PWR1_HIFIDAC;
		}

		if ( powerDown & WM_POWER_AUDIO_VOICE_DAC )
		{
            powerVal[PWR_REG_1] &= ~WM8753_PWR1_VXDAC;
		}

		if ( powerDown & WM_POWER_AUDIO_HIFI_ADC )
		{
			powerVal[PWR_REG_2] &= ~WM8753_PWR2_ADC;	
		}


		if ( powerDown & WM_POWER_MIXERS )
		{
			powerVal[PWR_REG_2] &= ~WM8753_PWR2_MIX;

			powerVal[PWR_REG_4] &= ~WM8753_PWR4_MIX;
		}
		if ( powerDown & WM_POWER_INPUTS )
		{
            powerVal[PWR_REG_2] &= ~WM8753_PWR2_MICAMPEN;
		}

        if ( powerDown & WM_POWER_CLOCK )
        {
            powerVal[PWR_REG_1] |= WM8753_PWR1_DIGENB;
        }

        /*
         * Set to 500kOhm divider for low-power standby and
         * disable VREF.
         */
        if ( powerDown & WM_POWER_VREF )
        {
            powerVal[PWR_REG_1] |= ( WM8753_PWR1_VMIDSEL_500KOHM &
                                     WM8753_PWR1_VMIDSEL_MASK );

            powerVal[PWR_REG_1] &= ~ WM8753_PWR1_VREF;
        }


        if ( (powerDown & (WM_POWER_VREF | WM_POWER_MIXERS))
            && 0 == (newPowered & (WM_POWER_VREF | WM_POWER_MIXERS))
            )
        {

            WMPlatformDisableAmplifiers( hDevice );
        }

        /* Set up powerReg so that it starts with the first power register. */
		powerReg = WM8753_PWR_MGMT_1;

		for ( powerLoop = 0; powerLoop < WM8753_MAX_POWER_REGS; powerLoop++ )
		{
			status = WMWrite( hDevice, powerReg++, powerVal[powerLoop] );
			if ( WM_ERROR( status ) )
			{
				goto error;
			}
		}

        /*
         * If we've been told to power down everything, make sure really
         * everything is powered down (even things we didn't power up
         * ourselves).
         */
        if ( WM_POWER_ALL == powerSections )
        {
            powerVal[PWR_REG_1] = WM8753_PWR1_VMIDSEL_500KOHM | WM8753_PWR1_DIGENB;
            powerVal[PWR_REG_2] = 0;
            powerVal[PWR_REG_3] = 0;
            powerVal[PWR_REG_4] = 0;
            
            /* Set up powerReg so that it starts with the first power register. */
            powerReg = WM8753_PWR_MGMT_1;
    
            for ( powerLoop = 0; powerLoop < WM8753_MAX_POWER_REGS; powerLoop++ )
            {
                status = WMWrite( hDevice, powerReg++, powerVal[powerLoop] );
                if ( WM_ERROR( status ) )
                {
                    goto error;
                }
            }
        }
    }

    /*
     * Remember what we've got powered up.
     */
#if WM_CACHE_POWER_STATE
    if ( pDeviceContext->v_pWMData )
    {
		for ( powerLoop = 0; powerLoop < WM8753_MAX_POWER_REGS; powerLoop++ )
		{
            pDeviceContext->v_pWMData->powerReg[powerLoop] = powerVal[powerLoop];
		}

        pDeviceContext->v_pWMData->WmPower = newPowered;
    }
#endif /* WM_CACHE_POWER_STATE */

    /*
     * We're done.
     */
done:

    return WMS_SUCCESS;

    /*
     * Error cleanup.
     */
error:
    return status;
}

/*-----------------------------------------------------------------------------
 * Function:    WM8753GetCurrentPower
 *
 * Returns the current power state by looking at the register.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *
 * Returns:     WM_POWERFLAG
 *      The current power state.
 *---------------------------------------------------------------------------*/
WM_POWERFLAG WM8753GetCurrentPower( WM_DEVICE_HANDLE hDevice )
{
    WM_POWERFLAG        currentPower = 0;
    WM_REGTYPE          powerVal[WM8753_MAX_POWER_REGS];
    WM_REGTYPE			powerReg = WM8753_PWR_MGMT_1;
	int					powerLoop;
    WMSTATUS            status;

	/*
	 * Get the current power status of the device.
	 */
	for ( powerLoop = 0; powerLoop < WM8753_MAX_POWER_REGS; powerLoop++ )
	{
        status = WMRead( hDevice, powerReg++, &powerVal[powerLoop] );
        if ( WM_ERROR( status ) )
        {
            goto done;
        }
	}
    
    /*
     * Convert from register values to power flags.
     * Note the register values are "powered on".
     */
    currentPower |= WM_POWER_LINK;
    
    if ( !( powerVal[PWR_REG_1] & WM8753_PWR1_DIGENB ) )
    {
        currentPower |= WM_POWER_CLOCK;
    }

    if ( powerVal[PWR_REG_2] & WM8753_PWR2_ADC )
    {
        currentPower |= WM_POWER_AUDIO_HIFI_ADC;
    }

    if ( powerVal[PWR_REG_1] & WM8753_PWR1_HIFIDAC )
    {
        currentPower |= WM_POWER_AUDIO_HIFI_DAC;
    }

    if ( powerVal[PWR_REG_1] & WM8753_PWR1_VXDAC )
    {
        currentPower |= WM_POWER_AUDIO_VOICE_DAC;
    }

    if ( ( powerVal[PWR_REG_2] & WM8753_PWR2_MIX ) ||
         ( powerVal[PWR_REG_4] & WM8753_PWR4_MIX ) )
    {
        currentPower |= WM_POWER_MIXERS;
    }

    if ( powerVal[PWR_REG_1] & WM8753_PWR1_VREF )
    {
        currentPower |= WM_POWER_VREF;
    }

    if ( powerVal[PWR_REG_3] & WM8753_PWR3_OUTPUT )
    {
        currentPower |= WM_POWER_OUTPUTS;
    }
 
done:
    return currentPower;


}

/*-----------------------------------------------------------------------------
 * Function:    private_CalcPowered
 *
 * Works out what should currently be powered up, based on what all the drivers
 * are requesting and the various dependencies.
 * 
 * NB This function only makes sense if we have global data pointer.
 *
 * Parameters:
 *      hDevice             handle to the device (from WMOpenDevice)
 *      driverId            The device ID (e.g. WM_DRIVER_TOUCH)
 *      powerUp             The sections to power up.
 *      powerDown           The sections to power down.
 *      pCurrentPower       A pointer to receive the current power state.
 *
 * Returns:     WM_POWERFLAG
 *  The bitmask describing the sections which should be powered up.
 *---------------------------------------------------------------------------*/
static WM_POWERFLAG private_CalcPowered( WM_DEVICE_HANDLE   hDevice,
                                         WM_DRIVER_ID       driverId,
                                         WM_POWERFLAG       powerUp,
                                         WM_POWERFLAG       powerDown,
                                         WM_POWERFLAG       *pCurrentPower
                                       )
{
    WM_DEVICE_CONTEXT   *pDeviceContext = WMHANDLE_TO_DEVICE( hDevice );
    WM_POWERFLAG        newPowered = 0;

#if WM_CACHE_POWER_STATE
    unsigned int        driver = DRIVER_TO_INDEX( driverId );

    WM_ASSERT( hDevice, driver < WM_MAX_DRIVERS );
#endif /* WM_CACHE_POWER_STATE */

    /*
     * Work out what's currently on.
     */
    *pCurrentPower = WM8753GetCurrentPower( hDevice );        
        
    /*
     * If we're entering sleep, we want everything powered off.
     */
    if ( pDeviceContext->v_pWMData->powerStateFlags & WM_ENTERING_SLEEP )
    {
        newPowered = 0;
        goto done;
    }
    
    /*
     * Check whether we've got our globals.
     */
#if WM_CACHE_POWER_STATE
    if ( pDeviceContext->v_pWMData )
    {
        int drv;
        
        /*
         * Update our driver settings.
         */
        pDeviceContext->v_pWMData->powerRequirements[driver] |= powerUp;
        pDeviceContext->v_pWMData->powerRequirements[driver] &= ~powerDown;

        /*
         * Check what all the drivers are asking for.
         */
        for ( drv = 0; drv < WM_MAX_DRIVERS; drv++ )
        {
            newPowered |= pDeviceContext->v_pWMData->powerRequirements[drv];
        }
    }
    else
#endif /* WM_CACHE_POWER_STATE */
    {
        newPowered = ( *pCurrentPower | powerUp ) & ~powerDown;
    }

    /*
     * Now work out dependencies.
     */

    /* Anything audio needs audio stuff powered up */
    if ( newPowered & ( WM_POWER_AUDIO_DACS
                      | WM_POWER_OUTPUTS
                      | WM_POWER_INPUTS )
       )
    {
        newPowered |= WM_POWER_MIXERS | WM_POWER_VREF;
    }

    /* The ADC just needs the references */
    if ( newPowered & WM_POWER_AUDIO_ADCS )
    {
        newPowered |= WM_POWER_VREF;
    }
    
    /* DAC and ADC need the clock */
    if ( newPowered & ( WM_POWER_AUDIO_DACS | WM_POWER_AUDIO_ADCS ) )
    {
        newPowered |= WM_POWER_CLOCK;
    }

done:
    return newPowered;
}

#endif /* WM8753_FAMILY */

/*------------------------------ END OF FILE ---------------------------------*/