phone.m

有关matlab的电子书籍有一定的帮助希望有用

function phone(action)
%PHONE  Signal processing and the touch-tone phone.

%   Ned Gulley, 6-21-93
%   Copyright (c) 1988-98 by The MathWorks, Inc.
%   $Revision: 5.6 $  $Date: 1997/11/26 20:13:17 $

global tones1 tones2

if nargin<1,
    action='initialize';
end;

if strcmp(action,'initialize'),
    figNumber=figure( ...
        'Name','Phone Pad', ...
        'NumberTitle','off', ...
        'Backingstore','off', ...
        'Visible','off');
    axHndl1=axes( ...
        'Units','normalized', ...
        'Position',[0.10 0.60 0.60 0.32], ...
        'Drawmode','fast', ...
        'Visible','on');
    axHndl2=axes( ...
        'Units','normalized', ...
        'Position',[0.10 0.10 0.60 0.32], ...
        'Drawmode','fast', ...
        'Visible','on');

    %===================================
    % Information for all buttons
    labelColor=[0.8 0.8 0.8];
    top=0.85;
    left=0.75;
    bottom=0.05;
    xLabelPos=0.75;
    labelWid=0.20;
    labelHt=0.05;
    btnWid=0.20;
    btnHt=0.08;
    % Spacing between the button and the next command's label
    spacing=0.05;
    btnOffset=0.;
    
    %====================================
    % The CONSOLE frame
    % Load in the touch tone phone sounds from the MAT-file TONES.
    load ptones
    % Use the frame's userdata to hold the tones matrix
    frmBorder=0.02;
    yPos=bottom-frmBorder;
    frmPos=[left-frmBorder yPos btnWid+2*frmBorder 0.9+2*frmBorder];
    frmHndl=uicontrol( ...
        'Style','frame', ...
        'Units','normalized', ...
        'Position',frmPos, ...
        'BackgroundColor',[0.50 0.50 0.50]);

    %====================================
    % The TONE buttons
    %btnNumber=1;
    %yLabelPos=0.90-(btnNumber-1)*(btnHt+labelHt+spacing);
    labelStr=' Button No.';
    
    for count=1:12,
        btnPos=[xLabelPos+rem(count-1,3)*(btnWid/3) ...
            top-floor((count-1)/3)*(btnWid/3) btnWid/3 btnWid/3];
        btnStr=num2str(count);
        if count==10, btnStr='*'; end;
        if count==11, btnStr='0'; end;
        if count==12, btnStr='#'; end;
        uicontrol( ...
            'Style','pushbutton', ...
            'Units','normalized', ...
            'Position',btnPos, ...
            'String',btnStr, ...
            'UserData',count, ...
            'Callback','phone(''tone'')');
    end;

    %====================================
    % The SOUND button
    btnNumber=2;
    yPos=top-3*btnHt;
    labelStr='Sound';
    % Setting this checkbox will allow the sound to work
    
    % Generic button information
    btnPos=[left yPos-btnHt btnWid btnHt];
    sndHndl=uicontrol( ...
        'Style','checkbox', ...
        'Units','normalized', ...
        'Position',btnPos, ...
        'Enable','on', ...
        'String',labelStr);

    %====================================
    % The INFO button
    labelStr='Info';
    callbackStr='phone(''info'')';
    infoHndl=uicontrol( ...
        'Style','push', ...
        'Units','normalized', ...
        'Position',[left bottom+btnHt+spacing btnWid btnHt], ...
        'String',labelStr, ...
        'Callback',callbackStr);

    %====================================
    % The CLOSE button
    labelStr='Close';
    callbackStr='close(gcf)';
    closeHndl=uicontrol( ...
        'Style','push', ...
        'Units','normalized', ...
        'Position',[left bottom btnWid btnHt], ...
        'String',labelStr, ...
        'Callback',callbackStr);

    % Initialize the plot with tone number 1
    Fs=8192;    
    axes(axHndl1);
    t=tones1(:,14);
    tone=tones1(:,1);
    plot1Hndl=plot(t,tone,'Erasemode','background');
    xlabel('Time (sec)');
    ylabel('Signal');
    title('Time Response');
    set(axHndl1,'XLim',[0 0.05],'YLim',[-1 1]);
    axes(axHndl2);
    p = psd(tones1(:,1),256,[],[],128);
    f = (0:127)/128 * (Fs/2);
    f=f(1:63);
    p=p(1:63,1);
    plot2Hndl=semilogy(f,p,'Erasemode','background');
    xlabel('Frequency (Hz)');
    ylabel('Signal Power');
    title('Spectrum');
    set(axHndl2,'XLim',[0 2000]);

    % Uncover the figure
    set(figNumber,'Visible','on', ...
        'UserData',[frmHndl infoHndl closeHndl plot1Hndl plot2Hndl sndHndl]);

elseif strcmp(action,'tone'),
    figNumber=watchon;
    hndlList=get(figNumber,'Userdata');
    frmHndl=hndlList(1);
    infoHndl=hndlList(2);
    closeHndl=hndlList(3);
    plot1Hndl=hndlList(4);
    plot2Hndl=hndlList(5);
    sndHndl=hndlList(6);
    %set([closeHndl infoHndl],'Enable','off');

    % ====== Playback the tone here
    % Sampling rate is 8192 Hz
    Fs = 8192;    
    toneChoice=get(gco,'UserData');
    tone=tones1(:,toneChoice);
    if get(sndHndl,'Value'),
        sound([tones1(:,toneChoice); tones2(:,toneChoice)],Fs);;
    end;
    p = psd(tone,256,[],[],128);
    f = (0:127)/128 * (Fs/2);
    p=p(1:63,1);
    set(plot1Hndl,'YData',tone);
    set(plot2Hndl,'Ydata',p);
    % ====== End of playing tone

    %set([closeHndl infoHndl],'Enable','on');
    watchoff(figNumber);

elseif strcmp(action,'colormap'),
    hndl=gco;

elseif strcmp(action,'mode'),
    hndl=gco;

elseif strcmp(action,'info'),
    ttlStr=get(gcf,'Name');
    hlpStr= ...                                          
        [' This window demonstrates the speed and     '  
         ' utility of the "psd" command in the        '  
         ' Signal Processing Toolbox.                 '  
         '                                            '  
         ' The touch tone phone pad in the upper right'  
         ' plays the actual tones used by a normal    '  
         ' phone. The upper plot shows a sample of the'  
         ' time response of the sound. The lower plot '  
         ' shows the spectrum associated with the     '  
         ' waveform.                                  '  
         '                                            '  
         ' Notice that two tones are used to code each'  
         ' number on the dial.                        '  
         '                                            '  
         ' File name: phone.m                         '];
    helpfun(ttlStr,hlpStr);                              

end;    % if strcmp(action, ...