test44x_ca01.c

430例程大全 端口操作 时钟模块FLL+操作 flash读写操作 看门狗操作 timerA-操作 timerB-操作 比较器A操作 基本定时器LED&LCD操作 ADC&BT&LC

#include  "msp430x11x1.h"

void delay(void);                       // Software delay

void main (void)
{
  WDTCTL = WDTPW + WDTHOLD;             // Stop WDT
  CACTL2 = P2CA0;                       // P2.3 = +comp
  CCTL0 = CCIE;                         // CCR0 interrupt enabled
  TACTL = TASSEL_2 + ID_3 + MC_2;       // SMCLK/8, cont-mode
  _EINT();                              // enable interrupts

  while (1)                             // Loop
  {
    CACTL1 = 0x00;                      // No reference voltage
    _BIS_SR(LPM0_bits);                 // Enter LPM0
    CACTL1 = CAREF0 + CAON;             // 0.25*Vcc on P2.3, Comp. on
    _BIS_SR(LPM0_bits);                 // Enter LPM0
    CACTL1 = CAREF1 + CAON;             // 0.5*Vcc on P2.3, Comp. on
    _BIS_SR(LPM0_bits);                 // Enter LPM0
    CACTL1 = CAREF1 + CAREF0 + CAON;    // 0.55V on P2.3, Comp. on
    _BIS_SR(LPM0_bits);                 // Enter LPM0
  }
}

// Timer A0 interrupt service routine
interrupt[TIMERA0_VECTOR] void Timer_A(void)
{
    _BIC_SR_IRQ(LPM0_bits);             // Clear LPM0 bits from 0(SR)
}