📄 jeep.cmd
字号:
marker_name = .JEEP.Steering_Wheel.MARKER_64 &
adams_id = 64 &
location = -260.0, 1033.2, 260.0 &
orientation = 210.0277022564d, 120.0d, 270.0d
!
marker create &
marker_name = .JEEP.Steering_Wheel.MARKER_65 &
adams_id = 65 &
location = -260.0, 1033.2, 260.0 &
orientation = 120.0277022564d, 0.0d, 0.0d
!
marker create &
marker_name = .JEEP.Steering_Wheel.MARKER_152 &
adams_id = 152 &
location = -392.9632829693, 956.347872631, 260.0 &
orientation = 120.0277022564d, 90.0d, 0.0d
!
marker create &
marker_name = .JEEP.Steering_Wheel.MARKER_272_CD01 &
adams_id = 272 &
location = -260.0, 1033.2, 450.0 &
orientation = 0.0d, 0.0d, 0.0d
!
marker create &
marker_name = .JEEP.Steering_Wheel.MARKER_261 &
adams_id = 261 &
location = -873.5, 678.6, 260.0 &
orientation = 120.0277022564d, 90.0d, 249.3918821615d
!
part create rigid_body mass_properties &
part_name = .JEEP.Steering_Wheel &
material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder &
cylinder_name = .JEEP.Steering_Wheel.CYLINDER_54 &
adams_id = 54 &
center_marker = .JEEP.Steering_Wheel.MARKER_61 &
angle_extent = 360.0 &
length = 708.6066680465 &
radius = 15.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
geometry create shape torus &
torus_name = .JEEP.Steering_Wheel.TORUS_55 &
center_marker = .JEEP.Steering_Wheel.MARKER_62 &
angle_extent = 360.0 &
major_radius = 190.0 &
minor_radius = 12.0 &
side_count_for_perimeter = 20 &
segment_count = 20
!
geometry create shape cylinder &
cylinder_name = .JEEP.Steering_Wheel.CYLINDER_56 &
adams_id = 56 &
center_marker = .JEEP.Steering_Wheel.MARKER_63 &
angle_extent = 360.0 &
length = 190.0 &
radius = 8.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
geometry create shape cylinder &
cylinder_name = .JEEP.Steering_Wheel.CYLINDER_57 &
adams_id = 57 &
center_marker = .JEEP.Steering_Wheel.MARKER_64 &
angle_extent = 360.0 &
length = 190.0 &
radius = 8.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
geometry create shape cylinder &
cylinder_name = .JEEP.Steering_Wheel.CYLINDER_58 &
adams_id = 58 &
center_marker = .JEEP.Steering_Wheel.MARKER_65 &
angle_extent = 360.0 &
length = 190.0 &
radius = 8.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
part attributes &
part_name = .JEEP.Steering_Wheel &
color = MAIZE &
name_visibility = off
!
!---------------------------------- Left_RCA ----------------------------------!
!
!
defaults coordinate_system &
default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position &
part_name = .JEEP.Left_RCA &
adams_id = 21 &
location = 0.0, 0.0, 0.0 &
orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system &
default_coordinate_system = .JEEP.Left_RCA
!
! ****** Markers for current part ******
!
marker create &
marker_name = .JEEP.Left_RCA.MARKER_86 &
adams_id = 86 &
location = 689.37, 375.0, 363.22 &
orientation = 90.0d, 60.0000101119d, 270.0d
!
marker create &
marker_name = .JEEP.Left_RCA.cm &
adams_id = 130 &
location = 1024.098267602, 375.0, 567.0246068017 &
orientation = 90.0d, 56.6040888353d, 0.0d
!
marker create &
marker_name = .JEEP.Left_RCA.MARKER_87 &
adams_id = 87 &
location = 1265.0, 375.0, 825.0 &
orientation = 180.0d, 180.0d, 0.0d
!
marker create &
marker_name = .JEEP.Left_RCA.MARKER_291 &
adams_id = 291 &
location = 689.37, 375.0, 363.22 &
orientation = 270.0d, 30.0d, 90.0d
!
marker create &
marker_name = .JEEP.Left_RCA.MARKER_94 &
adams_id = 94 &
location = 1070.42, 375.0, 583.22 &
orientation = 0.0d, 0.0d, 0.0d
!
marker create &
marker_name = .JEEP.Left_RCA.MARKER_209 &
adams_id = 209 &
location = 1265.0, 375.0, 695.56 &
orientation = 0.0d, 0.0d, 0.0d
!
marker create &
marker_name = .JEEP.Left_RCA.MARKER_265 &
adams_id = 265 &
location = 1265.0, 375.0, 825.0 &
orientation = 0.1131544248d, 180.0d, 0.0d
!
part create rigid_body mass_properties &
part_name = .JEEP.Left_RCA &
material_type = .JEEP.steel
!
! ****** Points for current part ******
!
point create &
point_name = .JEEP.Left_RCA.RL_Spring_lower &
location = 1070.42, 375.0, 583.22
!
! ****** Graphics for current part ******
!
geometry create shape cylinder &
cylinder_name = .JEEP.Left_RCA.CYLINDER_59 &
adams_id = 59 &
center_marker = .JEEP.Left_RCA.MARKER_86 &
angle_extent = 360.0 &
length = 664.6802031804 &
radius = 25.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
geometry create shape cylinder &
cylinder_name = .JEEP.Left_RCA.CYLINDER_60 &
adams_id = 60 &
center_marker = .JEEP.Left_RCA.MARKER_87 &
angle_extent = 360.0 &
length = 129.44 &
radius = 25.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
part attributes &
part_name = .JEEP.Left_RCA &
color = RED &
name_visibility = off
!
!--------------------------------- Right_RCA ----------------------------------!
!
!
defaults coordinate_system &
default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position &
part_name = .JEEP.Right_RCA &
adams_id = 22 &
location = 0.0, 0.0, 0.0 &
orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system &
default_coordinate_system = .JEEP.Right_RCA
!
! ****** Markers for current part ******
!
marker create &
marker_name = .JEEP.Right_RCA.MARKER_263 &
adams_id = 263 &
location = 1265.0, 375.0, -825.0 &
orientation = 2.3212022006d, 0.0d, 0.0d
!
marker create &
marker_name = .JEEP.Right_RCA.MARKER_88 &
adams_id = 88 &
location = 689.37, 375.0, -363.22 &
orientation = 90.0d, 119.9999898881d, 270.0d
!
marker create &
marker_name = .JEEP.Right_RCA.cm &
adams_id = 131 &
location = 1024.098267602, 375.0, -567.0246068017 &
orientation = 90.0d, 123.3959111647d, 0.0d
!
marker create &
marker_name = .JEEP.Right_RCA.MARKER_89 &
adams_id = 89 &
location = 1265.0, 375.0, -825.0 &
orientation = 0.0d, 0.0d, 0.0d
!
marker create &
marker_name = .JEEP.Right_RCA.MARKER_293 &
adams_id = 293 &
location = 689.37, 375.0, -363.22 &
orientation = 90.0d, 30.0d, 270.0d
!
marker create &
marker_name = .JEEP.Right_RCA.MARKER_96 &
adams_id = 96 &
location = 1070.42, 375.0, -583.22 &
orientation = 0.0d, 0.0d, 0.0d
!
marker create &
marker_name = .JEEP.Right_RCA.MARKER_211 &
adams_id = 211 &
location = 1265.0, 375.0, -695.56 &
orientation = 0.0d, 0.0d, 0.0d
!
part create rigid_body mass_properties &
part_name = .JEEP.Right_RCA &
material_type = .JEEP.steel
!
! ****** Points for current part ******
!
point create &
point_name = .JEEP.Right_RCA.RR_Spring_lower &
location = 1070.42, 375.0, -583.22
!
! ****** Graphics for current part ******
!
geometry create shape cylinder &
cylinder_name = .JEEP.Right_RCA.CYLINDER_61 &
adams_id = 61 &
center_marker = .JEEP.Right_RCA.MARKER_88 &
angle_extent = 360.0 &
length = 664.6802031804 &
radius = 25.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
geometry create shape cylinder &
cylinder_name = .JEEP.Right_RCA.CYLINDER_62 &
adams_id = 62 &
center_marker = .JEEP.Right_RCA.MARKER_89 &
angle_extent = 360.0 &
length = 129.44 &
radius = 25.0 &
side_count_for_body = 20 &
segment_count_for_ends = 20
!
part attributes &
part_name = .JEEP.Right_RCA &
color = GREEN &
name_visibility = off
!
!----------------------------------- Joints -----------------------------------!
!
!
constraint create joint spherical &
joint_name = .JEEP.JOINT_65 &
adams_id = 65 &
i_marker_name = .JEEP.Left_UCA.MARKER_305 &
j_marker_name = .JEEP.Left_Kingpin.MARKER_306
!
constraint attributes &
constraint_name = .JEEP.JOINT_65 &
name_visibility = off
!
constraint create joint spherical &
joint_name = .JEEP.JOINT_67 &
adams_id = 67 &
i_marker_name = .JEEP.Left_LCA.MARKER_309 &
j_marker_name = .JEEP.Left_Kingpin.MARKER_310
!
constraint attributes &
constraint_name = .JEEP.JOINT_67 &
name_visibility = off
!
constraint create joint spherical &
joint_name = .JEEP.JOINT_60 &
adams_id = 60 &
i_marker_name = .JEEP.Left_Tie_rod.MARKER_295 &
j_marker_name = .JEEP.Left_Pull_arm.MARKER_296
!
constraint attributes &
constraint_name = .JEEP.JOINT_60 &
name_visibility = off
!
constraint create joint fixed &
joint_name = .JEEP.JOINT_69 &
adams_id = 69 &
i_marker_name = .JEEP.Left_Pull_arm.MARKER_313 &
j_marker_name = .JEEP.Left_Kingpin.MARKER_314
!
constraint attributes &
constraint_name = .JEEP.JOINT_69 &
name_visibility = off
!
constraint create joint fixed &
joint_name = .JEEP.JOINT_70 &
adams_id = 70 &
i_marker_name = .JEEP.Left_Knuckle.MARKER_315 &
j_marker_name = .JEEP.Left_Kingpin.MARKER_316
!
constraint attributes &
constraint_name = .JEEP.JOINT_70 &
name_visibility = off
!
constraint create joint revolute &
joint_name = .JEEP.JOINT_56 &
adams_id = 56 &
i_marker_name = .JEEP.Left_UCA.MARKER_287 &
j_marker_name = .JEEP.Chassis.MARKER_288
!
constraint attributes &
constraint_name = .JEEP.JOINT_56 &
name_visibility = off
!
constraint create joint revolute &
joint_name = .JEEP.JOINT_54 &
adams_id = 54 &
i_marker_name = .JEEP.Left_LCA.MARKER_283 &
j_marker_name = .JEEP.Chassis.MARKER_284
!
constraint attributes &
constraint_name = .JEEP.JOINT_54 &
name_visibility = off
!
constraint create joint spherical &
joint_name = .JEEP.JOINT_66 &
adams_id = 66 &
i_marker_name = .JEEP.Right_UCA.MARKER_307 &
j_marker_name = .JEEP.Right_Kingpin.MARKER_308
!
constraint attributes &
constraint_name = .JEEP.JOINT_66 &
name_visibility = off
!
constraint create joint spherical &
joint_name = .JEEP.JOINT_68 &
adams_id = 68 &
i_marker_name = .JEEP.Right_LCA.MARKER_311 &
j_marker_name = .JEEP.Right_Kingpin.MARKER_312
!
constraint attributes &
constraint_name = .JEEP.JOINT_68 &
name_visibility = off
!
constraint create joint spherical &
joint_name = .JEEP.JOINT_61 &
adams_id = 61 &
i_marker_name = .JEEP.Right_Tie_rod.MARKER_297 &
j_marker_name = .JEEP.Right_Pull_arm.MARKER_298
!
constraint attributes &
constraint_name = .JEEP.JOINT_61 &
name_visibility = off
!
constraint create joint fixed &
joint_name = .JEEP.JOINT_71 &
adams_id = 71 &
i_marker_name = .JEEP.Right_Pull_arm.MARKER_317 &
j_marker_name = .JEEP.Right_Kingpin.MARKER_318
!
constraint attributes &
constraint_name = .JEEP.JOINT_71 &
name_visibility = off
!
constraint create joint fixed &
joint_name = .JEEP.JOINT_72 &
adams_id = 72 &
i_marker_name = .JEEP.Right_Knuckle.MARKER_319 &
j_marker_name = .JEEP.Right_Kingpin.MARKER_320
!
constraint attributes &
constraint_name = .JEEP.JOINT_72 &
name_visibility = off
!
constraint create joint revolute &
joint_name = .JEEP.JOINT_57 &
adams_id = 57 &
i_marker_name = .JEEP.Right_UCA.MARKER_289 &
j_marker_name = .JEEP.Chassis.MARKER_290
!
constraint attributes &
constraint_name = .JEEP.JOINT_57 &
name_visibility = off
!
constraint create joint revolute &
joint_name = .JEEP.JOINT_55 &
adams_id = 55 &
i_marker_name = .JEEP.Right_LCA.MARKER_285 &
j_marker_name = .JEEP.Chassis.MARKER_286
!
constraint attributes &
constraint_name = .JEEP.JOINT_55 &
name_visibility = off
!
constraint create joint hooke &
joint_name = .JEEP.JOINT_62 &
adams_id = 62 &
i_marker_name = .JEEP.Left_Tie_rod.MARKER_299 &
j_marker_name = .JEEP.Center_link.MARKER_300
!
constraint attributes &
constraint_name = .JEEP.JOINT_62 &
name_visibility = off
!
constraint create joint revolute &
joint_name = .JEEP.JOINT_16 &
adams_id = 16 &
i_marker_name = .JEEP.Center_link.MARKER_68 &
j_marker_name = .JEEP.Pitman_arm.MARKER_69
!
constraint attributes &
constraint_name = .JEEP.JOINT_16 &
name_visibility = off
!
constraint create joint revolute &
joint_name = .JEEP.JOINT_38 &
adams_id = 38 &
i_marker_name = .JEEP.Pitman_arm.MARKER_238 &
j_marker_name = .JEEP.Chassis.MARKER_239
!
constraint attributes &
constraint_name =⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -