jeep.cmd

含有线性插值, 样条插值,Gau ·清华大学2002年出版的《科学 ·等值线图广泛应用于石油勘探 ·此文件包括蒙特卡罗方法的基 ·书是针对工程上常用的行之有 ·一个目标跟踪系统的M

!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Right_Knuckle.MARKER_21  &
   adams_id = 21  &
   location = -1335.0, 375.0, -825.0  &
   orientation = 168.6771407503d, 1.0199323338d, 191.324607129d
!
marker create  &
   marker_name = .JEEP.Right_Knuckle.cm  &
   adams_id = 123  &
   location = -1334.744, 376.2785, -751.761  &
   orientation = 348.6771407508d, 178.9800676662d, 270.0000000066d
!
marker create  &
   marker_name = .JEEP.Right_Knuckle.MARKER_319  &
   adams_id = 319  &
   location = -1334.488, 377.557, -678.522  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Knuckle.MARKER_267  &
   adams_id = 267  &
   location = -1335.0, 375.0, -825.0  &
   orientation = 178.6771407503d, 1.0199323338d, 1.43622955d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Right_Knuckle  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Right_Knuckle.CYLINDER_38  &
   adams_id = 38  &
   center_marker = .JEEP.Right_Knuckle.MARKER_21  &
   angle_extent = 360.0  &
   length = 146.5012111793  &
   radius = 20.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Right_Knuckle  &
   color = GREEN  &
   name_visibility = off
!
!-------------------------------- Center_link ---------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Center_link  &
   adams_id = 15  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Center_link
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_54  &
   adams_id = 54  &
   location = -1594.556, 444.195, 257.77  &
   orientation = 256.9864829499d, 160.4854005989d, 77.7106517657d
!
marker create  &
   marker_name = .JEEP.Center_link.cm  &
   adams_id = 124  &
   location = -1618.9352861366, 449.8294600652, 0.0  &
   orientation = 76.9864829499d, 180.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_55  &
   adams_id = 55  &
   location = -1624.0, 451.0, 172.5  &
   orientation = 180.0d, 180.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_56  &
   adams_id = 56  &
   location = -1624.0, 451.0, -172.5  &
   orientation = 76.9864829499d, 160.4854005989d, 257.7106517657d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_300  &
   adams_id = 300  &
   location = -1594.556, 444.195, 257.77  &
   orientation = 76.9864829499d, 19.5145994011d, 180.0d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_68  &
   adams_id = 68  &
   location = -1624.0, 451.0, 172.5  &
   orientation = 180.0d, 90.0d, 180.0d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_72  &
   adams_id = 72  &
   location = -1624.0, 451.0, -172.5  &
   orientation = 180.0d, 90.0d, 180.0d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_302  &
   adams_id = 302  &
   location = -1594.556, 444.195, -257.77  &
   orientation = 76.9864829499d, 160.4854005989d, 257.7106517657d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_273  &
   adams_id = 273  &
   location = -1618.9352861366, 449.8294600652, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Center_link.MARKER_321_CD02  &
   adams_id = 321  &
   location = -1618.9352861366, 449.8294600652, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Center_link  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Center_link.CYLINDER_47  &
   adams_id = 47  &
   center_marker = .JEEP.Center_link.MARKER_54  &
   angle_extent = 360.0  &
   length = 90.4667345548  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Center_link.CYLINDER_48  &
   adams_id = 48  &
   center_marker = .JEEP.Center_link.MARKER_55  &
   angle_extent = 360.0  &
   length = 345.0  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Center_link.CYLINDER_49  &
   adams_id = 49  &
   center_marker = .JEEP.Center_link.MARKER_56  &
   angle_extent = 360.0  &
   length = 90.4667345548  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Center_link  &
   color = MAIZE  &
   name_visibility = off
!
!--------------------------------- Pitman_arm ---------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Pitman_arm  &
   adams_id = 16  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Pitman_arm
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Pitman_arm.MARKER_57  &
   adams_id = 57  &
   location = -1624.0, 451.0, 172.5  &
   orientation = 90.0d, 90.0d, 270.0d
!
marker create  &
   marker_name = .JEEP.Pitman_arm.cm  &
   adams_id = 125  &
   location = -1534.0, 451.0, 172.5  &
   orientation = 90.0d, 90.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Pitman_arm.MARKER_69  &
   adams_id = 69  &
   location = -1624.0, 451.0, 172.5  &
   orientation = 180.0d, 90.0d, 180.0d
!
marker create  &
   marker_name = .JEEP.Pitman_arm.MARKER_238  &
   adams_id = 238  &
   location = -1444.0, 451.0, 172.5  &
   orientation = 180.0d, 90.0d, 180.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Pitman_arm  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Pitman_arm.CYLINDER_50  &
   adams_id = 50  &
   center_marker = .JEEP.Pitman_arm.MARKER_57  &
   angle_extent = 360.0  &
   length = 180.0  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Pitman_arm  &
   color = CYAN  &
   name_visibility = off
!
!--------------------------------- Idler_arm ----------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Idler_arm  &
   adams_id = 17  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Idler_arm
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Idler_arm.MARKER_58  &
   adams_id = 58  &
   location = -1624.0, 451.0, -172.5  &
   orientation = 90.0d, 90.0d, 270.0d
!
marker create  &
   marker_name = .JEEP.Idler_arm.cm  &
   adams_id = 126  &
   location = -1534.0, 451.0, -172.5  &
   orientation = 90.0d, 90.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Idler_arm.MARKER_73  &
   adams_id = 73  &
   location = -1624.0, 451.0, -172.5  &
   orientation = 180.0d, 90.0d, 180.0d
!
marker create  &
   marker_name = .JEEP.Idler_arm.MARKER_303  &
   adams_id = 303  &
   location = -1444.0, 451.0, -172.5  &
   orientation = 90.0d, 90.0d, 270.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Idler_arm  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Idler_arm.CYLINDER_51  &
   adams_id = 51  &
   center_marker = .JEEP.Idler_arm.MARKER_58  &
   angle_extent = 360.0  &
   length = 180.0  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Idler_arm  &
   color = MAGENTA  &
   name_visibility = off
!
!------------------------------- Steering_gear --------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Steering_gear  &
   adams_id = 18  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Steering_gear
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Steering_gear.MARKER_59  &
   adams_id = 59  &
   location = -1444.0, 451.0, 172.5  &
   orientation = 117.6358756319d, 76.3758046774d, 262.9691158205d
!
marker create  &
   marker_name = .JEEP.Steering_gear.cm  &
   adams_id = 127  &
   location = -1338.0, 506.5, 201.5  &
   orientation = 297.6358756319d, 103.6241953226d, 90.0d
!
marker create  &
   marker_name = .JEEP.Steering_gear.MARKER_240  &
   adams_id = 240  &
   location = -1338.0, 506.5, 201.5  &
   orientation = 297.6358756319d, 103.6241953226d, 97.0308841795d
!
marker create  &
   marker_name = .JEEP.Steering_gear.MARKER_154  &
   adams_id = 154  &
   location = -1232.0, 562.0, 230.5  &
   orientation = 297.6358756319d, 103.6241953226d, 46.9322283003d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Steering_gear  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Steering_gear.CYLINDER_52  &
   adams_id = 52  &
   center_marker = .JEEP.Steering_gear.MARKER_59  &
   angle_extent = 360.0  &
   length = 246.2295676802  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Steering_gear  &
   color = RED  &
   name_visibility = off
!
!------------------------------- Steering_shaft -------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Steering_shaft  &
   adams_id = 19  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Steering_shaft
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Steering_shaft.MARKER_60  &
   adams_id = 60  &
   location = -1232.0, 562.0, 230.5  &
   orientation = 108.0168090425d, 85.5255848202d, 268.5465135894d
!
marker create  &
   marker_name = .JEEP.Steering_shaft.cm  &
   adams_id = 128  &
   location = -1052.75, 620.3, 245.25  &
   orientation = 288.0168090425d, 94.4744151798d, 90.0d
!
marker create  &
   marker_name = .JEEP.Steering_shaft.MARKER_155  &
   adams_id = 155  &
   location = -1232.0, 562.0, 230.5  &
   orientation = 108.0168090425d, 85.5255848202d, 134.5890216256d
!
marker create  &
   marker_name = .JEEP.Steering_shaft.MARKER_260  &
   adams_id = 260  &
   location = -873.5, 678.6, 260.0  &
   orientation = 288.0168090425d, 94.4744151798d, 290.1371710907d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Steering_shaft  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Steering_shaft.CYLINDER_53  &
   adams_id = 53  &
   center_marker = .JEEP.Steering_shaft.MARKER_60  &
   angle_extent = 360.0  &
   length = 378.1376204505  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Steering_shaft  &
   color = GREEN  &
   name_visibility = off
!
!------------------------------- Steering_Wheel -------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Steering_Wheel  &
   adams_id = 20  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Steering_Wheel
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Steering_Wheel.MARKER_61  &
   adams_id = 61  &
   location = -260.0, 1033.2, 260.0  &
   orientation = 300.0277022564d, 90.0d, 90.0d
!
marker create  &
   marker_name = .JEEP.Steering_Wheel.cm  &
   adams_id = 129  &
   location = -392.9632829693, 956.347872631, 260.0  &
   orientation = 300.0277022564d, 90.0d, 90.0d
!
marker create  &
   marker_name = .JEEP.Steering_Wheel.MARKER_62  &
   adams_id = 62  &
   location = -260.0, 1033.2, 260.0  &
   orientation = 300.0277022564d, 90.0d, 90.0d
!
marker create  &
   marker_name = .JEEP.Steering_Wheel.MARKER_63  &
   adams_id = 63  &
   location = -260.0, 1033.2, 260.0  &
   orientation = 30.0277022564d, 120.0d, 270.0d
!
marker create  &