jeep.cmd

含有线性插值, 样条插值,Gau ·清华大学2002年出版的《科学 ·等值线图广泛应用于石油勘探 ·此文件包括蒙特卡罗方法的基 ·书是针对工程上常用的行之有 ·一个目标跟踪系统的M

   marker_name = .JEEP.Left_LCA.cm  &
   adams_id = 117  &
   location = -1379.9796600199, 296.4682364126, 467.8870592881  &
   orientation = 57.2992375933d, 11.9087624773d, 270.0d
!
marker create  &
   marker_name = .JEEP.Left_LCA.MARKER_11  &
   adams_id = 11  &
   location = -1339.243, 270.315, 697.432  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Left_LCA.MARKER_309  &
   adams_id = 309  &
   location = -1339.243, 270.315, 697.432  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Left_LCA.MARKER_283  &
   adams_id = 283  &
   location = -1428.932, 327.896, 192.048  &
   orientation = 90.0d, 10.0d, 270.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Left_LCA  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Left_LCA.CYLINDER_27  &
   adams_id = 27  &
   center_marker = .JEEP.Left_LCA.MARKER_10  &
   angle_extent = 360.0  &
   length = 516.5004121373  &
   radius = 20.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape ellipsoid  &
   ellipsoid_name = .JEEP.Left_LCA.ELLIPSOID_28  &
   adams_id = 89  &
   center_marker = .JEEP.Left_LCA.MARKER_11  &
   x_scale_factor = 50.0  &
   y_scale_factor = 50.0  &
   z_scale_factor = 50.0
!
part attributes  &
   part_name = .JEEP.Left_LCA  &
   color = RED  &
   name_visibility = off
!
!------------------------------- Right_Kingpin --------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Right_Kingpin  &
   adams_id = 9  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Right_Kingpin
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Right_Kingpin.MARKER_12  &
   adams_id = 12  &
   location = -1339.243, 270.315, -697.432  &
   orientation = 177.4615517058d, 80.0096688426d, 194.3351272512d
!
marker create  &
   marker_name = .JEEP.Right_Kingpin.cm  &
   adams_id = 118  &
   location = -1332.046, 432.6535, -668.8075  &
   orientation = 177.4615517058d, 80.0096688426d, 90.0d
!
marker create  &
   marker_name = .JEEP.Right_Kingpin.MARKER_308  &
   adams_id = 308  &
   location = -1324.849, 594.992, -640.183  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Kingpin.MARKER_312  &
   adams_id = 312  &
   location = -1339.243, 270.315, -697.432  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Kingpin.MARKER_318  &
   adams_id = 318  &
   location = -1334.488, 377.557, -678.522  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Kingpin.MARKER_320  &
   adams_id = 320  &
   location = -1334.488, 377.557, -678.522  &
   orientation = 0.0d, 0.0d, 0.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Right_Kingpin  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Right_Kingpin.CYLINDER_29  &
   adams_id = 29  &
   center_marker = .JEEP.Right_Kingpin.MARKER_12  &
   angle_extent = 360.0  &
   length = 329.9996811605  &
   radius = 20.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Right_Kingpin  &
   color = GREEN  &
   name_visibility = off
!
!--------------------------------- Right_UCA ----------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Right_UCA  &
   adams_id = 10  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Right_UCA
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Right_UCA.MARKER_13  &
   adams_id = 13  &
   location = -1324.849, 594.992, -640.183  &
   orientation = 157.9906162728d, 13.4481137216d, 202.5683791666d
!
marker create  &
   marker_name = .JEEP.Right_UCA.cm  &
   adams_id = 119  &
   location = -1312.3173794169, 625.9942298363, -500.3409564706  &
   orientation = 337.9906162728d, 166.5518862784d, 270.0d
!
marker create  &
   marker_name = .JEEP.Right_UCA.MARKER_14  &
   adams_id = 14  &
   location = -1324.849, 594.992, -640.183  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_UCA.MARKER_307  &
   adams_id = 307  &
   location = -1324.849, 594.992, -640.183  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_UCA.MARKER_289  &
   adams_id = 289  &
   location = -1295.861, 666.706, -316.702  &
   orientation = 90.0d, 5.0d, 270.0d
!
marker create  &
   marker_name = .JEEP.Right_UCA.MARKER_52  &
   adams_id = 52  &
   location = -1314.39, 620.866, -523.473  &
   orientation = 0.0d, 0.0d, 0.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Right_UCA  &
   material_type = .JEEP.steel
!
! ****** Points for current part ******
!
point create  &
   point_name = .JEEP.Right_UCA.Right_Spring_lower  &
   location = -1314.39, 620.866, -523.473
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Right_UCA.CYLINDER_30  &
   adams_id = 30  &
   center_marker = .JEEP.Right_UCA.MARKER_13  &
   angle_extent = 360.0  &
   length = 332.6006002716  &
   radius = 20.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape ellipsoid  &
   ellipsoid_name = .JEEP.Right_UCA.ELLIPSOID_31  &
   adams_id = 90  &
   center_marker = .JEEP.Right_UCA.MARKER_14  &
   x_scale_factor = 50.0  &
   y_scale_factor = 50.0  &
   z_scale_factor = 50.0
!
part attributes  &
   part_name = .JEEP.Right_UCA  &
   color = MAIZE  &
   name_visibility = off
!
!--------------------------------- Right_LCA ----------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Right_LCA  &
   adams_id = 11  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Right_LCA
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Right_LCA.MARKER_15  &
   adams_id = 15  &
   location = -1339.243, 270.315, -697.432  &
   orientation = 237.2992375934d, 11.9087624773d, 122.1366166796d
!
marker create  &
   marker_name = .JEEP.Right_LCA.cm  &
   adams_id = 120  &
   location = -1379.9796600199, 296.4682364126, -467.8870592881  &
   orientation = 237.2992375933d, 11.9087624773d, 90.0d
!
marker create  &
   marker_name = .JEEP.Right_LCA.MARKER_16  &
   adams_id = 16  &
   location = -1339.243, 270.315, -697.432  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_LCA.MARKER_311  &
   adams_id = 311  &
   location = -1339.243, 270.315, -697.432  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_LCA.MARKER_285  &
   adams_id = 285  &
   location = -1428.932, 327.896, -192.048  &
   orientation = 270.0d, 10.0d, 90.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Right_LCA  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Right_LCA.CYLINDER_32  &
   adams_id = 32  &
   center_marker = .JEEP.Right_LCA.MARKER_15  &
   angle_extent = 360.0  &
   length = 516.5004121373  &
   radius = 20.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape ellipsoid  &
   ellipsoid_name = .JEEP.Right_LCA.ELLIPSOID_33  &
   adams_id = 91  &
   center_marker = .JEEP.Right_LCA.MARKER_16  &
   x_scale_factor = 50.0  &
   y_scale_factor = 50.0  &
   z_scale_factor = 50.0
!
part attributes  &
   part_name = .JEEP.Right_LCA  &
   color = CYAN  &
   name_visibility = off
!
!------------------------------- Right_Pull_arm -------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Right_Pull_arm  &
   adams_id = 12  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Right_Pull_arm
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Right_Pull_arm.MARKER_17  &
   adams_id = 17  &
   location = -1334.488, 377.557, -678.522  &
   orientation = 274.6651904033d, 104.346524271d, 91.1583713256d
!
marker create  &
   marker_name = .JEEP.Right_Pull_arm.cm  &
   adams_id = 121  &
   location = -1423.6265, 370.283, -701.396  &
   orientation = 94.6651904033d, 75.653475729d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Pull_arm.MARKER_298  &
   adams_id = 298  &
   location = -1512.765, 363.009, -724.27  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Pull_arm.MARKER_317  &
   adams_id = 317  &
   location = -1334.488, 377.557, -678.522  &
   orientation = 0.0d, 0.0d, 0.0d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Right_Pull_arm  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Right_Pull_arm.CYLINDER_34  &
   adams_id = 34  &
   center_marker = .JEEP.Right_Pull_arm.MARKER_17  &
   angle_extent = 360.0  &
   length = 184.6272258823  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
part attributes  &
   part_name = .JEEP.Right_Pull_arm  &
   color = MAGENTA  &
   name_visibility = off
!
!------------------------------- Right_Tie_rod --------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Right_Tie_rod  &
   adams_id = 13  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Right_Tie_rod
!
! ****** Markers for current part ******
!
marker create  &
   marker_name = .JEEP.Right_Tie_rod.MARKER_18  &
   adams_id = 18  &
   location = -1512.765, 363.009, -724.27  &
   orientation = 225.2126912839d, 13.876371637d, 133.9390311789d
!
marker create  &
   marker_name = .JEEP.Right_Tie_rod.cm  &
   adams_id = 122  &
   location = -1553.6605, 403.602, -491.02  &
   orientation = 225.2126912839d, 13.876371637d, 90.0d
!
marker create  &
   marker_name = .JEEP.Right_Tie_rod.MARKER_19  &
   adams_id = 19  &
   location = -1512.765, 363.009, -724.27  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Tie_rod.MARKER_20  &
   adams_id = 20  &
   location = -1594.556, 444.195, -257.77  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Tie_rod.MARKER_297  &
   adams_id = 297  &
   location = -1512.765, 363.009, -724.27  &
   orientation = 0.0d, 0.0d, 0.0d
!
marker create  &
   marker_name = .JEEP.Right_Tie_rod.MARKER_301  &
   adams_id = 301  &
   location = -1594.556, 444.195, -257.77  &
   orientation = 45.2126912839d, 166.123628363d, 226.0609688211d
!
part create rigid_body mass_properties  &
   part_name = .JEEP.Right_Tie_rod  &
   material_type = .JEEP.steel
!
! ****** Graphics for current part ******
!
geometry create shape cylinder  &
   cylinder_name = .JEEP.Right_Tie_rod.CYLINDER_35  &
   adams_id = 35  &
   center_marker = .JEEP.Right_Tie_rod.MARKER_18  &
   angle_extent = 360.0  &
   length = 480.5238644199  &
   radius = 15.0  &
   side_count_for_body = 20  &
   segment_count_for_ends = 20
!
geometry create shape ellipsoid  &
   ellipsoid_name = .JEEP.Right_Tie_rod.ELLIPSOID_36  &
   adams_id = 92  &
   center_marker = .JEEP.Right_Tie_rod.MARKER_19  &
   x_scale_factor = 40.0  &
   y_scale_factor = 40.0  &
   z_scale_factor = 40.0
!
geometry create shape ellipsoid  &
   ellipsoid_name = .JEEP.Right_Tie_rod.ELLIPSOID_37  &
   adams_id = 93  &
   center_marker = .JEEP.Right_Tie_rod.MARKER_20  &
   x_scale_factor = 40.0  &
   y_scale_factor = 40.0  &
   z_scale_factor = 40.0
!
part attributes  &
   part_name = .JEEP.Right_Tie_rod  &
   color = RED  &
   name_visibility = off
!
!------------------------------- Right_Knuckle --------------------------------!
!
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.ground
!
part create rigid_body name_and_position  &
   part_name = .JEEP.Right_Knuckle  &
   adams_id = 14  &
   location = 0.0, 0.0, 0.0  &
   orientation = 0.0d, 0.0d, 0.0d
!
defaults coordinate_system  &
   default_coordinate_system = .JEEP.Right_Knuckle