igxbug.h

此压缩包为杰得开发得z228的BSP的源代码,可以实现很多功能,尤其是视频解码有很好的效果.

/******************* (c) Marvell Semiconductor, Inc., 2004 ********************
 *
 *
 *  Purpose:    Debugging macros
 *
 *
 *	$Author: schiu $
 *
 *	$Date: 2004/10/27 $
 *
 *	$Revision: #3 $
 *
 *****************************************************************************/

#ifndef _IXBUG_H_
#define _IXBUG_H_


#ifndef DEFINE_DEBUG_VARS
extern ULONG DebugLevel;                    // this must be defined somewhere in drvr.
#endif

#define DBBASE          0x378               // base address for debug strobe output for analyzer snooping
#define DBLINE1         0x01                // bit 0 is parallel port pin 1
#define DBLINE2         0x02                // bit 1 is parallel port pin 14
#define DBLINE3         0x04                // bit 2 is parallel port pin 16
#define DBLINE4         0x08                // bit 3 is parallel port pin 17

#define DBG_NONE        0x00000000          // No debug - all off.
#define DBG_ERROR       0x00000001          // Debug for ERRORS
#define DBG_WARNING     0x00000002          // Debug for Warnings.
#define DBG_LOAD        0x00000004          // Debug for driver load
#define DBG_UNLOAD      0x00000008          // Debug for driver unload.

#define DBG_ISR         0x00000010          // Debug for ISR messages.

#define DBG_WMM     0x00000020
//#define DBG_HWIF        0x00000020          // Debug for Hw interface.

#define DBG_TXDATA      0x00000040          // Transmit data path debug
#define DBG_RXDATA      0x00000080          // Receive data path debug.

#define DBG_FWDL        0x00000100          // debug fw download.
#define DBG_CMDRESP     0x00000200          // Debug fw command/responses.
#define DBG_REGS        0x00000400          // Debug register dumps.
#define DBG_OID         0x00000800          // Debug OIDS

#define DBG_MACEVENT    0x00001000          // Debug MAC events.
#define DBG_TIMERS      0x00002000          // Debug timers.
#define DBG_WEP         0x00004000          // Wep related debug
#define DBG_PNP         0x00008000          // Plug-n-play related debug.

#define DBG_TXDATADUMP  0x00010000          // detailed dump of tx data.
#define DBG_RXDATADUMP  0x00020000          // detailed dump of tx data.
#define DBG_SCAN        0x00040000          // Debug scan operation.
#define DBG_POWERSAVE   0x00080000          // Debug for power save option.

#define DBG_L2ROAMING   0x00100000
//#define DBG_THRESH      0x00100000        // debug for frag and rts threshold parms.
//#define DBG_PREAMBLE    0x00200000        // debug for preamble parameter.
#define DBG_DEBUGUSE    0x00200000
#define DBG_DATARATE    0x00400000          // Link speed/data rate debug.
#define DBG_POWER       0x00800000          // debug power management.

#define DBG_SUBSCRIBEEVENT              0x01000000
#define DBG_DEEPSLEEP   0x08000000			// debug DeepSleep

#define DBG_ADHOCAES   		0x10000000		// debug Adhoc aes
#define DBG_HOSTSLEEP   0x02000000	
#define DBG_NEWCMD  	0x20000000			// debug new command structure
#define DBG_NEWPS       0x40000000          // debug the new PS structure
#define DBG_ALLEN       0x80000000       
#define DBG_CCX       0x80000000       

// Ran out of debug message
/*#define DBG_T1          0x01000000        // Our various time stamps.. up to 6.
#define DBG_T2          0x02000000          //  ||
#define DBG_T3          0x04000000          //  || 
#define DBG_T4          0x08000000          //  || 

#define DBG_T5          0x10000000          //  ||
#define DBG_T6          0x20000000          //  \/
*/

/*
#define DBG_T1          0x01000000          // Our various time stamps.. up to 6.
#define DBG_T2          0x02000000          //  ||
#define DBG_T3          0x04000000          //  || 
#define DBG_T4          0x08000000          //  || 

#define DBG_T5          0x10000000          //  ||
#define DBG_T6          0x20000000          //  \/
*/
#define DBG_T1          0x00000000          // Our various time stamps.. up to 6.
#define DBG_T2          0x00000000          //  ||
#define DBG_T3          0x00000000          //  || 
#define DBG_T4          0x00000000          //  || 

#define DBG_T5          0x00000000          //  ||
#define DBG_T6          0x00000000          //  \/

//#define DBG_QOS			0x01000000
//#define DBG_WPA			0x02000000
#define DBG_QOS         0x00080000          // KP
#define DBG_WPA         0x00080000   
//#define DBG_CRLF        0x40000000        // add some cr lfs before this message.
//#define DBG_RAW         0x80000000        // raw debug output
#define DBG_CRLF        0x00000000          // add some cr lfs before this message.
#define DBG_RAW         0x00000000          // raw debug output

#define DBG_IOCTL       0x04000000


#define DBG_ALL         0xffffffff          // All debug enabled.

#define DBG_DONTCARE (DBG_RAW | DBG_CRLF)   // either of these by themselves should not cause debug to print.
#define DBG_TIMESTAMPS ( DBG_T1 |  DBG_T2  | DBG_T3 | DBG_T4 | DBG_T5 | DBG_T6 )

#define DBG_DEFAULT (DBG_NONE \
| DBG_ERROR	\
| DBG_WARNING	\
| DBG_CCX	\
| DBG_NONE \
| DBG_MACEVENT )

/*
| DBG_TXDATADUMP\
\\
| DBG_MACEVENT\
| DBG_CMDRESP	\
| DBG_OID		\
*/

/*
| DBG_CMDRESP	\
| DBG_ALLEN	\
| DBG_MACEVENT\
| DBG_TXDATA\
*/

/*
#define DBG_DEFAULT (DBG_NONE \
| DBG_ERROR	\
| DBG_WARNING	\
| DBG_CMDRESP	\
| DBG_WEP	\
| DBG_NONE)
*/

/*
#define DBG_DEFAULT (DBG_NONE \
| DBG_ERROR		\
| DBG_WARNING	\
| DBG_CMDRESP	\
| DBG_ISR		\
| DBG_LOAD		\
| DBG_NEWPS		\
| DBG_WPA       \
| DBG_NEWCMD	\
| DBG_SCAN    \
| DBG_TXDATA    \
| DBG_RXDATA    \
| DBG_NONE)
*/

/*
#define DBG_DEFAULT (DBG_NONE \
| DBG_ERROR		\
| DBG_WARNING	\
| DBG_CMDRESP	\
| DBG_MACEVENT	\
| DBG_OID		\
| DBG_ISR		\
| DBG_LOAD		\
| DBG_UNLOAD	\
| DBG_NEWPS		\
| DBG_WPA       \
| DBG_NEWCMD	\
| DBG_PNP       \
| DBG_SCAN    \
| DBG_TXDATA    \
| DBG_RXDATA    \
| DBG_RXDATADUMP \
| DBG_L2ROAMING \
| DBG_NONE)
*/

//#define DBG_DEFAULT (DBG_NONE \
//| DBG_ERROR	\
//| DBG_WARNING	\
//| DBG_CMDRESP	\
//| DBG_MACEVENT	\
//| DBG_OID		\
//| DBG_LOAD		\
//| DBG_UNLOAD	\
//| DBG_DEEPSLEEP	\
//| DBG_WPA       \
//| DBG_SCAN      \
//| DBG_NONE)

/*#define DBG_DEFAULT (DBG_NONE \
| DBG_ERROR      \
| DBG_WARNING    \
| DBG_NONE)*/

//--------------------------------------------------------------------------------
// PJG: Add any of these to above define and uncomment to enable area of debug.
//--------------------------------------------------------------------------------
//| DBG_DATARATE  \
//| DBG_TXDATA     \
//| DBG_CMDRESP    \
//| DBG_ALL         \
//| DBG_PNP        \
//| DBG_LOAD       \
//| DBG_UNLOAD     \
//| DBG_POWER      \
//| DBG_TXDATA     \
//| DBG_RXDATA     \
//| DBG_ISR        \
//| DBG_TXDATADUMP \
//| DBG_TIMESTAMPS \
//| DBG_WEP        \
//| DBG_SCAN       \
//| DBG_CMDRESP    \
//| DBG_OID        \
//| DBG_MACEVENT   \
//| DBG_TIMERS     \
//| DBG_FWDL       \
//| DBG_REGS       \
//| DBG_HWIF       \
//| DBG_TXDATADUMP \
//| DBG_RXDATADUMP \
//| DBG_TXDATA     \
//| DBG_RXDATA     \
//| DBG_POWERSAVE  \
//| DBG_L2ROAMING  \
//| DBG_DATARATE   \
//| DBG_WPA        \
//| DBG_QOS        \

#ifdef DBG

#ifdef DEFINE_DEBUG_VAR
ULONG DebugLevel = DBG_DEFAULT;
LARGE_INTEGER    lastTime;
LARGE_INTEGER    curTime;
#else
extern unsigned char lptRegImage1;
extern unsigned char lptRegImage2;
extern ULONG DebugLevel;
extern LARGE_INTEGER    t1Time, t1LastTime, t1CurTime;
extern LARGE_INTEGER    t2Time, t2LastTime, t2CurTime;
extern LARGE_INTEGER    t3Time, t3LastTime, t3CurTime;
extern LARGE_INTEGER    t4Time, t4LastTime, t4CurTime;
extern LARGE_INTEGER    t5Time, t5LastTime, t5CurTime;
extern LARGE_INTEGER    t6Time, t6LastTime, t6CurTime;
#endif

#endif // #ifdef DBG

NTHALAPI
LARGE_INTEGER
KeQueryPerformanceCounter (
   OUT PLARGE_INTEGER PerformanceFrequency OPTIONAL
   );

extern LARGE_INTEGER isrTimeDelay;                                
//#ifdef MRVL_USE_DBG
#ifdef MRVL_PRINT_DBG_MSG

#ifdef UNDER_CE_XSCALE

#define DBGSTROBE_LINE_ON( line )
#define DBGSTROBE_LINE_OFF( line )
#define INITDEBUG()

#else // #ifdef UNDER_CE_XSCALE

// PJG: Parallel port is negative logic. clear the bit to have positive voltage show on scope.
#define DBGSTROBE_LINE_ON( line )                       \
{                                                       \
    UCHAR regVal;                                       \