📄 hostcmd.h
字号:
//***************************************************************************
//
// Definition of action or option for each command
//
// Define general purpose action
//
#define HostCmd_ACT_GEN_READ 0x0000
#define HostCmd_ACT_GEN_WRITE 0x0001
#define HostCmd_ACT_GEN_GET 0x0000
#define HostCmd_ACT_GEN_SET 0x0001
#define HostCmd_ACT_GEN_OFF 0x0000
#define HostCmd_ACT_GEN_ON 0x0001
// Define action or option for HostCmd_CMD_802_11_AUTHENTICATE
#define HostCmd_ACT_AUTHENTICATE 0x0001
#define HostCmd_ACT_DEAUTHENTICATE 0x0002
// Define action or option for HostCmd_CMD_802_11_ASSOCIATE
#define HostCmd_ACT_ASSOCIATE 0x0001
#define HostCmd_ACT_DISASSOCIATE 0x0002
#define HostCmd_ACT_REASSOCIATE 0x0003
#define HostCmd_CAPINFO_ESS 0x0001
#define HostCmd_CAPINFO_IBSS 0x0002
#define HostCmd_CAPINFO_CF_POLLABLE 0x0004
#define HostCmd_CAPINFO_CF_REQUEST 0x0008
#define HostCmd_CAPINFO_PRIVACY 0x0010
#define HostCmd_CAPINFO_SHORT_PREAMBLE 0x0020
#define HostCmd_CAPINFO_SHORT_SLOT_TIME 0x0400
#define HostCmd_ACT_ADD 0x0002
#define HostCmd_ACT_REMOVE 0x0004
#define HostCmd_ACT_USE_DEFAULT 0x0008
#define HostCmd_TYPE_WEP_40_BIT 0x0001 // 40 bit
#define HostCmd_TYPE_WEP_104_BIT 0x0002 // 104 bit
#define HostCmd_TYPE_WEP_128_BIT 0x0003 // 128 bit
#define HostCmd_TYPE_WEP_TX_KEY 0x0004 // TX WEP
#define HostCmd_NUM_OF_WEP_KEYS 4
#define HostCmd_WEP_KEY_INDEX_MASK 0x3fffffff
// Define action or option for HostCmd_CMD_802_11_RESET
#define HostCmd_ACT_NOT_REVERT_MIB 0x0001
#define HostCmd_ACT_REVERT_MIB 0x0002
#define HostCmd_ACT_HALT 0x0003
// Define action or option for HostCmd_CMD_802_11_SCAN
#define HostCmd_BSS_TYPE_BSS 0x0001
#define HostCmd_BSS_TYPE_IBSS 0x0002
#define HostCmd_BSS_TYPE_ANY 0x0003
// Define action or option for HostCmd_CMD_802_11_SCAN
#define HostCmd_SCAN_TYPE_ACTIVE 0x0000
#define HostCmd_SCAN_TYPE_PASSIVE 0x0001
#define HostCmd_SCAN_MIN_CH_TIME 100 //60
#define HostCmd_SCAN_MAX_CH_TIME 100 //60
#define HostCmd_SCAN_PROBE_DELAY_TIME 0
// Define action or option for HostCmd_CMD_802_11_QUERY_STATUS
#define HostCmd_STATUS_FW_INIT 0x0000
#define HostCmd_STATUS_FW_IDLE 0x0001
#define HostCmd_STATUS_FW_WORKING 0x0002
#define HostCmd_STATUS_FW_ERROR 0x0003
#define HostCmd_STATUS_FW_POWER_SAVE 0x0004
#define HostCmd_STATUS_MAC_RX_ON 0x0001
#define HostCmd_STATUS_MAC_TX_ON 0x0002
#define HostCmd_STATUS_MAC_LOOP_BACK_ON 0x0004
#define HostCmd_STATUS_MAC_WEP_ENABLE 0x0008
#define HostCmd_STATUS_MAC_INT_ENABLE 0x0010
// Define action or option for HostCmd_CMD_MAC_CONTROL
#define HostCmd_ACT_MAC_RX_ON 0x0001
#define HostCmd_ACT_MAC_TX_ON 0x0002
#define HostCmd_ACT_MAC_LOOPBACK_ON 0x0004
#define HostCmd_ACT_MAC_WEP_ENABLE 0x0008
#define HostCmd_ACT_MAC_INT_ENABLE 0x0010
#define HostCmd_ACT_MAC_MULTICAST_ENABLE 0x0020
#define HostCmd_ACT_MAC_BROADCAST_ENABLE 0x0040
#define HostCmd_ACT_MAC_PROMISCUOUS_ENABLE 0x0080
#define HostCmd_ACT_MAC_ALL_MULTICAST_ENABLE 0x0100
#ifdef WPA2
#define HostCmd_ACT_MAC_STRICT_PROTECTION_ENABLE 0x0400
#endif
//BugFix
#define HostCmd_ACT_MAC_WEP_TYPE 0x8000
// Define action or option or constant for HostCmd_CMD_MAC_MULTICAST_ADR
#define HostCmd_SIZE_MAC_ADR 6
#define HostCmd_MAX_MCAST_ADRS 32
// Define action or option for HostCmd_CMD_802_11_SNMP_MIB
#define HostCmd_TYPE_MIB_FLD_BOOLEAN 0x0001 // Boolean
#define HostCmd_TYPE_MIB_FLD_INTEGER 0x0002 // 32 UCHAR unsigned integer
#define HostCmd_TYPE_MIB_FLD_COUNTER 0x0003 // Counter
#define HostCmd_TYPE_MIB_FLD_OCT_STR 0x0004 // Octet string
#define HostCmd_TYPE_MIB_FLD_DISPLAY_STR 0x0005 // String
#define HostCmd_TYPE_MIB_FLD_MAC_ADR 0x0006 // MAC address
#define HostCmd_TYPE_MIB_FLD_IP_ADR 0x0007 // IP address
#define HostCmd_TYPE_MIB_FLD_WEP 0x0008 // WEP
// Define action or option for HostCmd_CMD_802_11_RADIO_CONTROL
//#ifdef MRVL_SET_RF_RADIO
#define HostCmd_TYPE_AUTO_PREAMBLE (0x0002 << 1)
#define HostCmd_TYPE_SHORT_PREAMBLE (0x0001 << 1)
#define HostCmd_TYPE_LONG_PREAMBLE (0x0000 << 1)
//#else
//#define HostCmd_TYPE_AUTO_PREAMBLE 0x0001
//#define HostCmd_TYPE_SHORT_PREAMBLE 0x0002
//#define HostCmd_TYPE_LONG_PREAMBLE 0x0003
//#endif
#define TURN_ON_RF 0x01
// Specific for CF
#define SET_AUTO_PREAMBLE 0x05
#define SET_SHORT_PREAMBLE 0x03
#define SET_LONG_PREAMBLE 0x01
// Define action or option for CMD_802_11_RF_CHANNEL
#define HostCmd_TYPE_802_11A 0x0001
#define HostCmd_TYPE_802_11B 0x0002
// Define action or option for HostCmd_CMD_802_11_RF_TX_POWER
#define HostCmd_ACT_TX_POWER_OPT_GET 0x0000
#define HostCmd_ACT_TX_POWER_OPT_SET 0x0001
#define HostCmd_ACT_TX_POWER_OPT_SET_HIGH 0x8007
#define HostCmd_ACT_TX_POWER_OPT_SET_MID 0x8004
#define HostCmd_ACT_TX_POWER_OPT_SET_LOW 0x8000
#define HostCmd_ACT_TX_POWER_OPT_SET_TPC 0x8fff //Auto Power
#define HostCmd_ACT_TX_POWER_INDEX_TPC 0xffff
#define HostCmd_ACT_TX_POWER_INDEX_HIGH 0x0007
#define HostCmd_ACT_TX_POWER_INDEX_MID 0x0004
#define HostCmd_ACT_TX_POWER_INDEX_LOW 0x0000
#define HostCmd_ACT_TX_POWER_LEVEL_MIN 0x000e // in dbm
#define HostCmd_ACT_TX_POWER_LEVEL_GAP 0x0001 // in dbm
// Define action or option for HostCmd_CMD_802_11_DATA_RATE
#define HostCmd_ACT_SET_TX_AUTO 0x0000
#define HostCmd_ACT_SET_TX_FIX_RATE 0x0001
#define HostCmd_ACT_GET_TX_RATE 0x0002
#define HostCmd_ACT_SET_RX 0x0001
#define HostCmd_ACT_SET_TX 0x0002
#define HostCmd_ACT_SET_BOTH 0x0003
#define HostCmd_ACT_GET_RX 0x0004
#define HostCmd_ACT_GET_TX 0x0008
#define HostCmd_ACT_GET_BOTH 0x000c
// TODO: Need to verify these values
// command option for QOS commands
#define HostCmd_ACT_SET 0x0001
#define HostCmd_ACT_GET 0x0000
#define HostCmd_ENABLE_RSN 0x0001
#define HostCmd_DISABLE_RSN 0x0000
#ifdef ADHOCAES
#define HostCmd_ACT_GET_AES 0x0002
#define HostCmd_ACT_SET_AES 0x0003
#define HostCmd_ACT_REMOVE_AES 0x0004
#endif
#define TYPE_ANTENNA_DIVERSITY 0xffff
// Define action or option for HostCmd_CMD_802_11_PS_MODE
#define HostCmd_TYPE_CAM 0x0000
#define HostCmd_TYPE_MAX_PSP 0x0001
#define HostCmd_TYPE_FAST_PSP 0x0002
#define HostCmd_SubCmd_Enter_PS 0x0030
#define HostCmd_SubCmd_Exit_PS 0x0031
#define HostCmd_SubCmd_TxPend_PS 0x0032
#define HostCmd_SubCmd_ChangeSet_PS 0x0033
#define HostCmd_SubCmd_Sleep_Confirmed 0x0034
#define HostCmd_SubCmd_Full_PowerDown 0x0035
#define HostCmd_SubCmd_Full_PowerUp 0x0036
// notify FW that there's no pending TX pkt
#define HostCmd_SubCmd_No_Tx_Pkt 0x0037
// action for CMD_EEPROM_ACCESS
#define HostCmd_ACT_READ 0x0000
#define HostCmd_ACT_WRITE 0x0001
#ifdef TLV_SCAN
#define HostCmd_SCAN_RADIO_TYPE_BG 0
#define HostCmd_SCAN_RADIO_TYPE_A 1
#define HostCmd_SCAN_PASSIVE_MAX_CH_TIME 100
#endif
#ifdef TLV_SCAN
#define TLV_TYPE_SSID 0x0000
#define TLV_TYPE_RATES 0x0001
#define TLV_TYPE_CHANLIST 0x0101
#define TLV_TYPE_NUMPROBES 0x0102 //ahan [2005-12-09], TLV for Number of Probes, dralee_20060220
#define TLV_TYPE_PHY_FH 0x0002
#define TLV_TYPE_PHY_DS 0x0003
#define TLV_TYPE_CF 0x0004
#define TLV_TYPE_IBSS 0x0006
#endif
#ifdef ENABLE_802_11D
#define TLV_TYPE_DOMAIN 0x0007
#endif
#ifdef CCX
/** TLV type ID definition */
#define PROPRIETARY_TLV_BASE_ID 0x0100
#define TLV_TYPE_KEY_MATERIAL (PROPRIETARY_TLV_BASE_ID + 0)
//#define TLV_TYPE_CHANLIST (PROPRIETARY_TLV_BASE_ID + 1)
//#define TLV_TYPE_NUMPROBES (PROPRIETARY_TLV_BASE_ID + 2)
#define TLV_TYPE_RSSI (PROPRIETARY_TLV_BASE_ID + 4)
#define TLV_TYPE_SNR (PROPRIETARY_TLV_BASE_ID + 5)
#define TLV_TYPE_FAILCOUNT (PROPRIETARY_TLV_BASE_ID + 6)
#define TLV_TYPE_BCNMISS (PROPRIETARY_TLV_BASE_ID + 7)
#define TLV_TYPE_LED_GPIO (PROPRIETARY_TLV_BASE_ID + 8)
#define TLV_TYPE_LEDBEHAVIOR (PROPRIETARY_TLV_BASE_ID + 9)
#define TLV_TYPE_PASSTHROUGH (PROPRIETARY_TLV_BASE_ID + 10)
#define TLV_TYPE_REASSOCAP (PROPRIETARY_TLV_BASE_ID + 11)
#define TLV_TYPE_POWER_TBL_2_4GHZ (PROPRIETARY_TLV_BASE_ID + 12)
#define TLV_TYPE_POWER_TBL_5GHZ (PROPRIETARY_TLV_BASE_ID + 13)
#define TLV_TYPE_BCASTPROBE (PROPRIETARY_TLV_BASE_ID + 14)
#define TLV_TYPE_NUMSSID_PROBE (PROPRIETARY_TLV_BASE_ID + 15)
#define TLV_TYPE_POWER_CAPABILITY 0x0021
#else
#ifdef WPA
#ifdef WPA2
#define TLV_TYPE_KEY_MATERIAL 0x0100
#endif
#endif
#define TLV_TYPE_RSSI 0x0104
#define TLV_TYPE_SNR 0x0105
#define TLV_TYPE_FAILCOUNT 0x0106
#define TLV_TYPE_BCNMISS 0x0107
#define TLV_TYPE_BCASTPROBE 0x010e
#define TLV_TYPE_NUMSSID_PROBE 0x010f
#endif ///CCX
//++dralee_20060420
#define PROPRIETARY_TLV_BASE_ID 0x0100
#define TLV_TYPE_CRYPTO_DATA (PROPRIETARY_TLV_BASE_ID + 17)
#ifdef ENABLE_802_11H_TPC
#define TLV_TYPE_POWER_CONSTRAINT 0x0020
#define TLV_TYPE_POWER_CAPABILITY 0x0021
#endif
//Plus++, 012606(for Broadcom mix mode fix)
#define RSN_IE_AES 1
#define RSN_IE_TKIP 2
//Plus--, 012706
//////////////////////////////////////////////////////////////////
//
// IEEE scan.confirm data structure borrowed from station FW code
// Reference: IEEE 802.11 1999 Spec 10.3.2.2.2
//
//////////////////////////////////////////////////////////////////
#ifdef UNDER_CE_XSCALE
#pragma pack(1)
#endif // UNDER_CE_XSCALE
// In station FW code, enum type is 1 byte UCHAR,
typedef enum
{
SSID = 0,
SUPPORTED_RATES,
FH_PARAM_SET,
DS_PARAM_SET,
CF_PARAM_SET,
TIM,
IBSS_PARAM_SET,
COUNTRY_INFO = 7,
CHALLENGE_TEXT = 16,
POWER_CONSTRAINT = 32,
POWER_CAPABILITY = 33,
TPC_REQUEST = 34,
TPC_REPORT = 35,
#ifdef CCX
SUPPORTED_CHANNELS = 36,
CHANNEL_SWITCH_ANN = 37,
QUIET = 40,
IBSS_DFS = 41,
#endif
EXTENDED_SUPPORTED_RATES = 50,
#ifdef CCX
VENDOR_SPECIFIC_221 = 221,
RM_CAPABILITY = 221, ///ref: S36.6 of CCX specification v2.8
#endif
WPA_IE = 221,
WPA_OUI_TYPE=2,
WPA2_IE = 48,
EXTRA_IE = 133,
WMM_OUI_TYPE=2
} IEEEtypes_ElementId_e;
typedef struct IEEEtypes_CapInfo_t
{
USHORT Ess:1;
USHORT Ibss:1;
USHORT CfPollable:1;
USHORT CfPollRqst:1;
USHORT Privacy:1;
USHORT ShortPreamble:1;
USHORT Pbcc:1;
USHORT ChanAgility:1 ;
//USHORT Rsrvd89:2;
USHORT SpectrumMgmt:1;
USHORT Rsrvd9:1;
USHORT ShortSlotTime:1;
USHORT Rsrvd1112:2;
USHORT DSSSOFDM:1;
USHORT Rsrvd1415:2;
} IEEEtypes_CapInfo_t;
#pragma pack(1)
typedef struct _MrvlIEtypesHeader {
USHORT Type;
USHORT Len;
} MrvlIEtypesHeader_t;
#ifdef BG_SCAN
//
// additional TLV data structures for background scan
//
typedef struct _MrvlIEtypes_BcastProbe_t
{
MrvlIEtypesHeader_t Header;
USHORT BcastProbe;
} MrvlIEtypes_BcastProbe_t;
typedef struct _MrvlIEtypes_NumSSIDProbe_t
{
MrvlIEtypesHeader_t Header;
USHORT NumSSIDProbe;
} MrvlIEtypes_NumSSIDProbe_t;
#endif //BG_SCAN
#ifdef ENABLE_802_11D
typedef enum {
DISABLE_11D = 0,
ENABLE_11D = 1,
} state_11d_t;
// Data structure for Country IE
typedef struct _IEEEtypes_SubbandSet
{
UCHAR FirstChan;
UCHAR NoOfChan;
UCHAR MaxTxPwr;
} IEEEtypes_SubbandSet_t;
typedef struct _IEEEtypes_CountryInfoSet
{
UCHAR ElementId;
UCHAR Len;
UCHAR CountryCode[COUNTRY_CODE_LEN];
IEEEtypes_SubbandSet_t Subband[1];
} IEEEtypes_CountryInfoSet_t;
typedef struct _IEEEtypes_CountryInfoFullSet
{
UCHAR ElementId;
UCHAR Len;
UCHAR CountryCode[COUNTRY_CODE_LEN];
IEEEtypes_SubbandSet_t Subband[MRVDRV_MAX_SUBBAND_802_11D];
} IEEEtypes_CountryInfoFullSet_t;
typedef struct _MrvlIEtypes_DomainParamSet
{
MrvlIEtypesHeader_t Header;
UCHAR CountryCode[COUNTRY_CODE_LEN];
//dralee_20060502
IEEEtypes_SubbandSet_t Subband[MRVDRV_MAX_SUBBAND_802_11D];
//IEEEtypes_SubbandSet_t Subband[1];
} MrvlIEtypes_DomainParamSet_t;
// Define data structure for HostCmd_CMD_802_11D_DOMAIN_INFO
typedef struct _HostCmd_DS_802_11D_DOMAIN_INFO
{
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -