sources-sdio

此压缩包为杰得开发得z228的BSP的源代码,可以实现很多功能,尤其是视频解码有很好的效果.

!IF 0

(c) Marvell Semiconductor, Inc., 2001 - 2002

Description:
    NDIS 5.1 driver nmake macro file, which provides the target, include
	and source files information.

!ENDIF


TARGETNAME=SD8385PN
DRIVER_SELECT=-DSDIO=1
TARGETTYPE=DYNLINK
DEFFILE=$(TARGETNAME).def
DLLENTRY=DllEntry

TARGETLIBS=$(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\coredll.lib \
          $(_COMMONSDKROOT)\lib\$(_CPUINDPATH)\ntcompat.lib \
		  		$(_SYSGENSDKROOT)\lib\$(_CPUINDPATH)\ndis.lib

TARGETLIBS=$(TARGETLIBS) $(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\SDCardLib.lib
INCLUDES= \
         .\;\
         $(_COMMONDDKROOT)\inc;\
         $(_COMMONOAKROOT)\inc;


CDEFINES=$(CDEFINES) -DSDIO=1 -DNDIS51_MINIPORT=1 -DNDIS_MINIPORT_DRIVER=1 -DMRVL_WINXP_NDIS51=1 -DWHQL_FIX=1
CDEFINES=$(CDEFINES) /W2
CDEFINES=$(CDEFINES) -DUNDER_CE_XSCALE -DPOCKETPC_FIX
CDEFINES=$(CDEFINES) -DIPAQ_ODD_UCHAR_ACCESS_FIX

# uncomment this to build interface 2.0
CDEFINES=$(CDEFINES) -DINTERFACE20

# uncomment to enable WPA support
CDEFINES=$(CDEFINES) -DWPA

# uncomment this to include delay to start power save mode
#CDEFINES=$(CDEFINES)  -DPOWERSAVE_DELAY_WORKAROUND

# uncomment this to include new PS scheme
CDEFINES=$(CDEFINES)  -DNEW_PS_SCHEME

#uncomment and compile in debug mode for dbg msg file
CDEFINES=$(CDEFINES)  -DMRVL_PRINT_DBG_MSG

#uncomment to enabled HW WEP TX
#CDEFINES=$(CDEFINES)  -DMRVL_USE_HW_WEP_TX

CDEFINES=$(CDEFINES)  -DMRV_CHIP_8385PN

#CDEFINES=$(CDEFINES)  -DUSE_RX_QUEUE
#CDEFINES=$(CDEFINES)  -DUSE_TX_QUEUE

# External FW download
#CDEFINES=$(CDEFINES)  -DMRVL_EXTERNAL_FW_DOWNLOAD

# Rev 4 board patch
#CDEFINES=$(CDEFINES)  -DEVALBOARD_REV4_FIX



# MRVL_USE_MULTIPLE_DTIM must set before MRVL_SET_REG_DTIM
#CDEFINES=$(CDEFINES)  -DMRVL_USE_MULTIPLE_DTIM
#CDEFINES=$(CDEFINES)  -DMRVL_SET_REG_DTIM

CDEFINES=$(CDEFINES)  -DADHOCAES

CDEFINES=$(CDEFINES)  -DDEEP_SLEEP

CDEFINES=$(CDEFINES)  -DHOST_SLEEP
CDEFINES=$(CDEFINES)  -DHOST_SLEEP_PS
CDEFINES=$(CDEFINES)  -DHOST_SLEEP_SYNC_PS  
CDEFINES=$(CDEFINES)  -DHOST_SLEEP_V5  

#CDEFINES=$(CDEFINES)  -DMRVL_SET_RF_RADIO  -DMRVL_RFCHANNEL
#CDEFINES=$(CDEFINES)  -DMRVL_DATARATE  -DMRVL_RXTXANTENNA
#CDEFINES=$(CDEFINES)  -DMRVL_REGIONCODE  -DMRVL_MACADDRESS
CDEFINES=$(CDEFINES)  -DMRVL_PSCONFIRM
#CDEFINES=$(CDEFINES) -DNEW_RSSI 
CDEFINES=$(CDEFINES)  -DMRVL_WINCE50
#CDEFINES=$(CDEFINES)  -DMRVL_SDRX

CDEFINES=$(CDEFINES)  -DMRVL_SET_RF_RADIO  -DMRVL_RFCHANNEL
CDEFINES=$(CDEFINES)  -DMRVL_DATARATE  -DMRVL_RXTXANTENNA
CDEFINES=$(CDEFINES)  -DMRVL_REGIONCODE  -DMRVL_MACADDRESS

CDEFINES=$(CDEFINES)  -DTLV_SCAN
CDEFINES=$(CDEFINES)  -DTLV_ASSOCIATE
CDEFINES=$(CDEFINES)  -DENABLE_802_11D
CDEFINES=$(CDEFINES)  -DWPA2
# OPEN the WMM flag now is just for V4 firmware which add 4 bytes ib RxPD structure 
CDEFINES=$(CDEFINES)  -DWMM

# Open Later
#CDEFINES=$(CDEFINES)  -DBG_SCAN
#CDEFINES=$(CDEFINES)  -DENABLE_802_11H_TPC
#CDEFINES=$(CDEFINES)  -DV4_CMDS
CDEFINES=$(CDEFINES)  -DCAL_DATA 

CDEFINES=$(CDEFINES)  -DTX_PRY_Q 
#CDEFINES=$(CDEFINES)  -DTX_PRY_Q_TEST 
CDEFINES=$(CDEFINES)  -DTX_PRY_Q_EXTRA

CDEFINES=$(CDEFINES)  -DRETQ_TIMER




SOURCES=  initproc.c \
        oidproc.c \
        hwacproc.c \
        cmdproc.c \
        miscproc.c \
        pnpproc.c \
        wep.c \
        TxProc.c \
        RxProc.c \
        IntProc.c \
        power.c \
        guicmd.c \
        cmdsend.c \
        NDISLoader.cpp \
        SDIOUtil.c \
        ExitProc.c \
        Wlan_11d.c \
        wmm.c