ocmj4×15d.c

本驱动程序是24064液晶(肇庆金鹏产品 型号Ocmj4×15D)上使用 控制器为8822 MCU为89S52 效果很好。可以用于8822控制器上的液晶

#include <reg52.h>
#define uchar unsigned char
#define lcd_regnada  P1
#define lcd_data     P1
#define lcd_control  P2
sbit lcd_rs   =P3^4;		//L:存取缓存器,H:存取DDRAM
sbit lcd_wr   =P3^5;		//L有效
sbit lcd_rd   =P2^3;		//L有效
sbit lcd_cs1  =P2^2;		//L有效
sbit lcd_cs2  =P3^3;		//H有效
sbit lcd_busy =P2^0;
sbit lcd_int  =P2^1;
sbit lcd_rst  =P2^4;		//L有效
//***************************************************
void delay(int k)
{
  int i;
  for(i=0;i<k;i++);
}
void delay1 (int ms)
{
  int i,j;
  for(i=0;i<ms;i++)
    for(j=0;j<123;j++);
}
//=============================================
void lcd_regwr(uchar regnada) small
{
  lcd_regnada = regnada;
  lcd_cs1 =0; // chip enable.
  lcd_rd = 1; //
  lcd_rs = 0; // rs = 0;
  lcd_wr = 0; // wr = 0;
  ;
  lcd_wr = 1; // wr = 1;
  lcd_rs = 1; // rs = 1;
  lcd_cs1 =1; // chip disable.
}

void lcd_regwrite(uchar regname,uchar regdata) small
{                                   //写资料到缓存器
  lcd_regwr(regname);
  delay(1);
  lcd_regwr(regdata);
}

//.............................................
void lcd_datawrite(uchar wrdata) small
{						//写资料到DDRAM
  while(lcd_busy == 1);
  lcd_data = wrdata;
  lcd_cs1 =0; // chip enable.
  lcd_rd = 1; //
  lcd_rs = 1; // rs = 1;
  lcd_wr = 0; // wr = 0;
  ;
  lcd_wr = 1; // wr = 1;
  lcd_rs = 1; // rs = 1;
  lcd_cs1 =1; // chip disable.
}
//.............................................
uchar lcd_regread(uchar regname) small
{                           //读缓存器
  uchar reg_rddata;
  lcd_regwr(regname);

  lcd_data = 0xff;
  lcd_cs1 =0; // chip enable.
  lcd_wr = 1; // wr = 1;
  lcd_rs = 0; // rs = 0;
  lcd_rd = 0; // rd = 0;
  ;
  reg_rddata = lcd_data;
  lcd_rd = 1; // rd = 1;
  lcd_rs = 1; // rs = 1;
  lcd_cs1 =1; // chip disable.
  return(reg_rddata);
}
//.............................................
 void gotoxy(uchar x,uchar y) small
{                                //定坐标
  lcd_regwrite(0x60,x); // active window top register(awtr)
  lcd_regwrite(0x70,y); // active window top register(awtr)
}
//=============================================

void lcd_reset(void) small
{               //上电复位
  delay1(120); // delay 120ms 等待上电复位
  lcd_control = 0xff; // lcd_rs/wr/rd/cs1/cs2 normal - skeep high.
}
//.............................................
void lcd_initial(void) small
{                   //初始化
  lcd_regwrite(0x00,0xc9); // lcd control register(lcr)
  lcd_regwrite(0x01,0xf2); // misc.register(mir)
  lcd_regwrite(0x02,0x10); // advance power setup register(apsr)
  lcd_regwrite(0x03,0x80); // advance display setup regiser(adsr)
  lcd_regwrite(0x10,0x6b); // cursor control register(ccr)
  lcd_regwrite(0x11,0x00); // distance of word or lines register(dwlr)
  lcd_regwrite(0x12,0x91); // memory access mode register(awrr)
  lcd_regwrite(0x21,0x1d); // display window right register(dwrr) 
  lcd_regwrite(0x31,0x3f); // display window bottom register(dwbr) 
  lcd_regwrite(0x41,0x00); // display window left register(dwlr)
  lcd_regwrite(0x51,0x00); // display window top register(dwtr)
  lcd_regwrite(0x20,0x1d); // active window right register(awrr) 
  lcd_regwrite(0x30,0x3f); // active window bottom register(awbr)
  lcd_regwrite(0x40,0x00); // active window left register(awlr)
  lcd_regwrite(0x50,0x00); // active window top register(awtr)
  lcd_regwrite(0x60,0x00); // cursor position x register(cpxr)
  lcd_regwrite(0x61,0x00); // begin segment position register(bgsg)
  lcd_regwrite(0x70,0x00); // cursor position y register(cpyr)
  lcd_regwrite(0x71,0x00); // shift action range,begin commom register(bgcm)
  lcd_regwrite(0x72,0x3f); // shift action range,end commom register(edcm) 
  lcd_regwrite(0x80,0xaa); // blink time register(btr)
  lcd_regwrite(0x81,0x00); // frame rate polarity change at common_fa register(fdca)
  lcd_regwrite(0x91,0x00); // frame rate polarity change at common_fb register(fdcb)
  lcd_regwrite(0x90,0x1e); // shift clock control register(sccr)  
  lcd_regwrite(0xa0,0x11); // interrupt setup & status register(frcb)
  lcd_regwrite(0xa1,0x00); // key scan control register(kscr)
  lcd_regwrite(0xa2,0x00); // key scan data register(ksdr)
  lcd_regwrite(0xa3,0x00); // key scan data expand register(kser)
  lcd_regwrite(0xb0,0x1d); // interrupt column setup register(intx) 
  lcd_regwrite(0xb1,0x3f); // interrupt row setup register(inty)  
  lcd_regwrite(0xc0,0x00); // touch panel control register(tpcr)
  lcd_regwrite(0xc1,0x0a); // adc status register(adcs)
  lcd_regwrite(0xc8,0x80); // touch panel segment high byte data register(tpxr)
  lcd_regwrite(0xc9,0x80); // touch panel common high byte data register(tpyr)
  lcd_regwrite(0xca,0x00); // touch panel segment/common low byte data register(tpzr)
  lcd_regwrite(0xd0,0x80); // lcd contrast control register (lccr)
  lcd_regwrite(0xe0,0x00); // pattern data register(pdr)
  lcd_regwrite(0xf0,0xa0); // font control register(fcr)
  lcd_regwrite(0xf1,0x0f); // font size control register
}
//.............................................
void lcd_clear(void) small
{                   //清屏
  uchar reg_rddata;
  lcd_regwrite(0xe0,0x00);
  reg_rddata = lcd_regread(0xf0);
  reg_rddata |= 0x08;
  lcd_regwrite(0xf0,reg_rddata);
}
//.............................................
void lcd_photo(uchar code *pho) small
{                          //显示图形
  uchar i,j,k;
  uchar code *pp;
  gotoxy(0,0);
  for(k=0;k<4;k++)
  {
    pp=pho;
    for(j=0;j<60;j++)
    {
      for(i=0;i<40;i++)
      {
        lcd_datawrite(*pp);
        ++pp;
      }
    }
  }
}
//.............................................
void lcd_lattice(uchar data1,uchar data2) small
{                                    //显示点阵
  uchar i,j;
  gotoxy(0,0);
  for(j=0;j<60;j++)
  {
    for(i=0;i<80;i++)
    {
      lcd_datawrite(data1);
    }
    for(i=0;i<80;i++)
    {
      lcd_datawrite(data2);
    }
  }
}
//.............................................
void lcd_character(uchar code *cha,int count) small
{                                    //显示中文或字符
  int i;
  for(i=0;i<count;i++)
  {
    lcd_datawrite(*cha);
    ++cha;
  }
}