stp1.stp

噪生消除的VRILOG实现

<session jtag_chain="USB-Blaster [USB-0]" jtag_device="@1: EP2C35 (0x020B40DD)" sof_file="">
  <display_tree>
    <display_branch instance="auto_signaltap_0" signal_set="signal_set: 2006/11/06 08:27:29  #0" trigger="trigger: 2006/11/06 08:27:29  #1"/>
  </display_tree>
  <instance compilation_mode="full" entity_name="sld_signaltap" is_auto_node="yes" is_expanded="true" name="auto_signaltap_0" source_file="sld_signaltap.vhd">
    <node_ip_info instance_id="0" mfg_id="110" node_id="0" version="4"/>
    <signal_set is_expanded="true" name="signal_set: 2006/11/06 08:27:29  #0">
      <clock name="CLOCK_50" polarity="posedge"/>
      <config ram_type="M4K" reserved_data_nodes="0" reserved_trigger_nodes="0" sample_depth="128" trigger_in_enable="no" trigger_out_enable="no"/>
      <top_entity/>
      <signal_vec>
        <trigger_input_vec>
          <wire connection_status="true" name="KEY[0]" tap_mode="classic" type="input pin"/>
          <wire connection_status="true" name="KEY[1]" tap_mode="classic" type="input pin"/>
          <wire connection_status="true" name="KEY[2]" tap_mode="classic" type="input pin"/>
          <wire connection_status="true" name="KEY[3]" tap_mode="classic" type="input pin"/>
        </trigger_input_vec>
        <data_input_vec>
          <wire connection_status="true" name="KEY[0]" tap_mode="classic" type="input pin"/>
          <wire connection_status="true" name="KEY[1]" tap_mode="classic" type="input pin"/>
          <wire connection_status="true" name="KEY[2]" tap_mode="classic" type="input pin"/>
          <wire connection_status="true" name="KEY[3]" tap_mode="classic" type="input pin"/>
        </data_input_vec>
      </signal_vec>
      <presentation>
        <data_view>
          <bus is_signal_inverted="no" link="all" name="KEY" order="msb_to_lsb" radix="hex" state="collapse" type="input pin">
            <net is_signal_inverted="no" name="KEY[3]"/>
            <net is_signal_inverted="no" name="KEY[2]"/>
            <net is_signal_inverted="no" name="KEY[1]"/>
            <net is_signal_inverted="no" name="KEY[0]"/>
          </bus>
        </data_view>
        <setup_view>
          <bus is_signal_inverted="no" link="all" name="KEY" order="msb_to_lsb" radix="hex" state="collapse" type="input pin">
            <net is_signal_inverted="no" name="KEY[3]"/>
            <net is_signal_inverted="no" name="KEY[2]"/>
            <net is_signal_inverted="no" name="KEY[1]"/>
            <net is_signal_inverted="no" name="KEY[0]"/>
          </bus>
        </setup_view>
      </presentation>
      <trigger is_expanded="true" name="trigger: 2006/11/06 08:27:29  #1" position="pre" power_up_trigger_mode="false" segment_size="1" trigger_in="dont_care" trigger_out="active high" trigger_type="circular">
        <power_up_trigger position="pre" segment_size="1" trigger_in="dont_care" trigger_out="active high" trigger_type="circular"/>
        <events>
          <level enabled="yes" type="basic">
            <power_up enabled="yes">
            </power_up>
            <op_node/>
          </level>
        </events>
      </trigger>
    </signal_set>
    <position_info>
      <single attribute="active tab" value="1"/>
    </position_info>
  </instance>
  <mnemonics/>
  <global_info>
    <single attribute="active instance" value="0"/>
    <multi attribute="window position" size="9" value="999,570,398,124,356,50,124,0,0"/>
  </global_info>
</session>