util.h

This soucse code is for CodevisionAVR and RF2500 application driver code is all included.The point

#define  PORT_LED            PORTC.4 


#define PORTB_IO_VAL	0x2C      //720
#define PORTD_IO_VAL	0x00
#define PORTC_IO_VAL	0x10
#define MASK_KEY_VAL	0xFF

#define P_SO	PINB.4   //CC1100模组定义
#define P_SCLK	PORTB.5  //CC2500模组定义
#define P_SI	PORTB.3  //
#define P_GDO2	PINB.1   //
#define P_GDO0	PINB.0   //
#define P_CSn	PORTB.2  //



#define	SW1	PORTC0		//按键定义
#define	SW2	PORTC1
#define	SW3	PORTC2
#define	SW4	PORTC3

#define	SW1_KEY	0XFE	//键值
#define	SW2_KEY	0XFD
#define	SW3_KEY	0XFB
#define	SW4_KEY	0XF7

#define CC1100_Mode	0	//程序模式
#define CC2500_Mode	1
#define CC1000_Mode	2

//-----------------------FOR CC1000-----------------------------------
#define IDLE_STATE	0;
#define RX_STATE	1;
#define TX_STATE	2;

void hardware_initialization(void);
void my_hardware_initialization(void);
void power_led_on(unsigned char num);
void eint_init(void);