eeb_stringtable.cpp

基于ARM平台的控制系统,自己带有MINIGUI,可以直接在VC下运行界面演示程序

#include "eeb.h"

const char * Info[][2]={
	{"压缩机","Compressor"},			//strCompressor
	{"压 缩 机: 正在运行",""},			//strCompressor_NowOn,	
	{"对应触点:",""},					//strCurrentRelay,
	{"BOHN双吸气并联压缩机组","BOHN dual suction parallel compressor"},	//strStartWndTitle,
	{"型号:[BMS-C-345L/240M]","Model:[BMS-C-345L/240M]"},//strStartWndModel			
	{"潍坊市圣荣精品超市","ShengYong super market"},//strStartWndProjectUse
	{"制造商:西克制冷(无锡)\n电话:[phone]","Manufacturer:HEATCRAFT wuxi\nTel:021-62694857"},//strStartWndProducerInfo
	{"低温饱和吸气温度","LT saturation temp"},//strStartWndLowSuckTemp
	{"中温饱和吸气温度","MT saturation temp"},//strStartWndMidSuckTemp
	{"饱和冷凝温度","Condenser saturation temp"},//strStartWndCoolerTemp
	{"低温供液温度","liquid temp"},//strStartWndLTLTemp
	{"进入","Enter"},		//strStartWndEnter
	////////////////////////////////////////////////////////////////
	{"请输入密码","Password"},		//strSOKBPleaseInputPassword
	{"密码错误","Password error"},		//strSOKBPasswrokErr
	{"请重新输入正确的密码以进入系统!","Please input password again!"},//strSOKBReinputPassword
	{"清除","CLR"},// strSOKBClear
	{"确定","OK"},// strSOKBOK
	////////////////////////////////////////////////////////////////
	{"低温压缩机","LT"},//strMenuLT
	{"中温压缩机","MT"},//strMenuMT
	{"冷凝器","Condenser"},//strMenuCooler
	{"过冷器","Colder"},//strMenuColder
	{"报警","Warning"}, //strMenuWaring
	{"传感器","Sensor"},//strMenuSensor
	{"密码","Password"},//strMenuPassword
	{"通讯","Commucation"},//strMenuComm
	{"历史纪录","History"},//strMenuHis
	{"显示","Display"},	//strMenuDisplay
	{"维修模式","Repair"},//strMenuRepair
	/////////////////////////////////////////////////////////////////
	{"主菜单","Control Panel"},//strMainControlPanel
	/////////////////////////////////////////////////////////////////
	{"语言设置","Language"},//strLanguageSet
	{"吸气压力设置点","Suction Pressure"},//strSuctionPress
	{"吸气压力调节带宽(+/-)","Pressure Range"},//strSuctionPressRange
	{"压缩机开机延时","Start Delay"},//strCompStartDelay
	{"压缩机停止延时","Stop Delay"},//strCompStopDelay
	{"当前吸气压力","Current Suction Press"},	//strCurSucPress
	{"冷凝温度","Condenser Temparature"},//strCoolerTemp
	{"供液温度","Liquid Temparature"},//strLiqTemp
	{"排气温度","Exhaust Temparature"},//strAirTemp
	{"过热度","OverHot Temparature"},//strOverHotTemp
	//////////////////////////////////////////////////////////////////
	{"冷凝器压力设置","Condenser Pres"},//strCondenserPress
	{"压力调节带宽(+/-)","Pressure Range"},//strCondenserPressRange
	{"风扇开机延时","Fan start delay"},//strFanStartDelay
	{"风扇关机延时","Fan stop delay"},//strFanStartDelay
	{"请输入%5.2f至%5.2f之间的数据!","This data must be between %5.2f and %5.2f!"},//strInValidInputWarnning
	{"输入数据超出范围","Invalid input"},//strInValidInputCap
	{" 确 定 ","  OK  "},// strMSGBOX_OK
	{"管理员密码...","User Pass"},// strUserPass
	{"维修员密码...","Admin Pass"},// strAdminPass
	{"管理员","Normal User"},// strUser
	{"维修员","Administrator"},// strAdmin
	{"管理员可以执行日常系统控制,维护,日志察看等基本操作","User can do routine maintenance,log check .etc"},
	{"维修员可以执行维修模式,系统设定等高级操作","Administrator can enter fix mode and config system."},//strAdminDesc
	{"请输入管理员旧密码:","Old Password:"},//strInputOldPass
	{"请输入管理员新密码:","New Password:"},//strInputNewPass
	{"请再输入一遍:","New Password again:"},//strInputNewPassAgain
	{"管理员密码已更改","Password changed"},//strPassChangeOK
	{"提示","Inform"},	//strPassChangeOKCap
    /////////////////////////////////////////////////////////////////////
    {"温度0","Temp0"},//strFixTempIn0,
    {"温度1","Temp1"},//strFixTempIn1,
    {"温度2","Temp2"},//strFixTempIn2,
    {"温度3","Temp3"},//strFixTempIn3,
    {"压力0","Press0"},//strFixPressIn0,
    {"压力1","Press1"},//strFixPressIn1,
    {"压力2","Press2"},//strFixPressIn2,
    {"压力3","Press3"},//strFixPressIn3,
    {"DI0","DI0"},//strFixDI0,
    {"DI1","DI1"},//strFixDI1,
    {"DI2","DI2"},//strFixDI2,
    {"DI3","DI3"},//strFixDI3,
    {"DI4","DI4"},//strFixDI4,
    {"DI5","DI5"},//strFixDI5,
    {"DI7","DI6"},//strFixDI6,
    {"DI6","DI7"},//strFixDI7,
    {"DO0","DO0"},//strFixDO0,
    {"DO1","DO1"},//strFixDO1,
    {"DO2","DO2"},//strFixDO2,
    {"DO3","DO3"},//strFixDO3,
    {"DO4","DO4"},//strFixDO4,
    {"DO5","DO5"},//strFixDO5,
    {"DO6","DO6"},//strFixDO6,
    {"DO7","DO7"},//strFixDO7,
    {"DO8","DO8"},//strFixDO8,
    {"DO9","DO9"},//strFixDO9,
    {"DOA","DOA"},//strFixDO10,
    {"DOB","DOB"},//strFixDO11,
    {"DOC","DOC"},//strFixDO12,
    {"DOD","DOD"},//strFixDO13,
    {"DOE","DOE"},//strFixDO14,
    {"DOF","DOF"},//strFixDO15,
};

LANG	g_LangInfo[]={
	"简体中文 (Chinese) ",
	"English  (英文) ",
};

void SetLanguage(int nLanguage)
{
	g_SysInfo.w_Language = nLanguage;
}
LANG* GetLanguage(int nLanguage)
{
	if(nLanguage == -1)
	{
		nLanguage = g_SysInfo.w_Language;
	}
	if(nLanguage >= sizeof(g_LangInfo)/sizeof(LANG))
	{
		return NULL;
	}
	return &(g_LangInfo[nLanguage]);
}
const char * GetStringResource(STRINGID nIndex)
{
    DEBUG_Assert(_MAX_STRING_ > nIndex);
	return Info[nIndex][g_SysInfo.w_Language];
}