jnand.min

QUALCOMM JNAND DRIVER

#============================================================================
#  Name:
#    jnand.min
#
#  Description:
#    Makefile included to define hardware specific things
#
#
#  Copyright (c) 2003-2004 by QUALCOMM, Incorporated.  
#  All Rights Reserved.
#----------------------------------------------------------------------------

#============================================================================
#
#                          EDIT HISTORY FOR MODULE
#
#  This section contains comments describing changes made to the module.
#  Notice that changes are listed in reverse chronological order.
#
#  $Header: //depot/asic/msm6250/tools/jnand/jnand.min#9 $ $DateTime: 2004/04/10 10:35:06 $ $Author: dionh $
#  
# when       who     what, where, why
# --------   ---     --------------------------------------------------------
# 04/10/04   drh     Move locate address back down as bug has been fixed
#                    for code overlapping parameter block address
# 10/30/03   drh     Expand code space to 16mb
# 10/28/03   drh     Change code and parm block addresses as a workaround
#                    for allowing more AMSS code space in flash.
# 10/23/03   drh     Add defines for DMSS image begin and end 
# 07/24/03   drh     Add included and defines to use DMSS h/w header files
#                    instead of local copies.
#                    Run from SDRAM, not PSRAM, now compatible with FFA
# 02/06/03   pg      Moved from ASWP402 server to ASWP401 server.
#                    Included path to MSM hardware definition files.
# 10/01/02   drh     Now can be used for both SURF and FFA
# 07/29/02   drh     Created from SURF version for MSM6100 FFA only 
# 07/12/02   drh     Added defines for using with CMM script in boot mode
# 07/09/02   drh     Removed CPU type passed to CMM script
# 07/06/02   drh     Created.  
# 
#============================================================================

#----------------------------------------------------------------------------
#  MSM specific Definitions
#----------------------------------------------------------------------------


# This is the value given to the compiler switch "-cpu"
#
ARM_CPU_TYPE=ARM926EJ-S



# These are used in creation of JNAND_PARAM.CMM
#
#  run from SDRAM so it works for both SURF and FFA
#
JNAND_CODE_ADDR=0x00800000#    # address of code start
JNAND_PARAM_ADDR=0x00A00000#   # address of parameter block


# These are used to manipulate the flash for boot programming
# and must encompass the 8k of the boot block at the address
# which it is located to run
JNAND_BOOT_BEGIN=0xFFFF0000#
JNAND_BOOT_END=0xFFFF7FFF#

# These are used to manipulate the flash for DMSS programming
# and must encompass the size of the DMSS image and start
# at the address which it is located to run
# Allow 16mb of code to be programmed
JNAND_CODE_BEGIN=0x00000000#
JNAND_CODE_END=0x00FFFFFF#


# these are any MSM specific defines like FEATURE_XXXX that are required
# to get the MSM hardware definition files to compile correctly
#
#   Must define BOOT_LOADER and FS_NAND_NON_DMSS for NAND device
#	drivers
#
MSM_TYPE_CFLAGS=-I../../drivers/hw \
	-I../../build/ms \
	-I../../build/cust \
	-I../../services/utils \
	-I../../services/rex \
	-I../../services/efs \
	-I../../drivers/tramp \
	-I../../drivers/clk \
	-I../../drivers/rf \
	-I../../drivers/tlmm \
	-I../../drivers/bio \
	-I../../1x/srch/gps \
	-DCUST_H=\"custsmnz.h\" \
	-DBOOT_LOADER -DFS_NAND_NON_DMSS