configure

This programme contains head file and library file of gcc.

fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"

# We need awk for the "check" target.  The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility.

AMTAR=${AMTAR-"${am_missing_run}tar"}

am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'





echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
  enableval="$enable_maintainer_mode"
  USE_MAINTAINER_MODE=$enableval
else
  USE_MAINTAINER_MODE=no
fi;
  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6


if test $USE_MAINTAINER_MODE = yes; then
  MAINTAINER_MODE_TRUE=
  MAINTAINER_MODE_FALSE='#'
else
  MAINTAINER_MODE_TRUE='#'
  MAINTAINER_MODE_FALSE=
fi

  MAINT=$MAINTAINER_MODE_TRUE



# Extract the first word of "dpkg-architecture", so it can be a program name with args.
set dummy dpkg-architecture; ac_word=$2
echo "$as_me:$LINENO: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
if test "${ac_cv_prog_have_dpkgarchitecture+set}" = set; then
  echo $ECHO_N "(cached) $ECHO_C" >&6
else
  if test -n "$have_dpkgarchitecture"; then
  ac_cv_prog_have_dpkgarchitecture="$have_dpkgarchitecture" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for ac_exec_ext in '' $ac_executable_extensions; do
  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
    ac_cv_prog_have_dpkgarchitecture="yes"
    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
    break 2
  fi
done
done

fi
fi
have_dpkgarchitecture=$ac_cv_prog_have_dpkgarchitecture
if test -n "$have_dpkgarchitecture"; then
  echo "$as_me:$LINENO: result: $have_dpkgarchitecture" >&5
echo "${ECHO_T}$have_dpkgarchitecture" >&6
else
  echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
fi

if test "x$have_dpkgarchitecture" != "xyes"
then
	{ { echo "$as_me:$LINENO: error: The dpkg development files (dpkg-dev) must be installed to build this package." >&5
echo "$as_me: error: The dpkg development files (dpkg-dev) must be installed to build this package." >&2;}
   { (exit 1); exit 1; }; }
fi

echo "$as_me:$LINENO: checking for Debian architecture" >&5
echo $ECHO_N "checking for Debian architecture... $ECHO_C" >&6
DEB_HOST_ARCH=`dpkg-architecture -qDEB_HOST_ARCH`
echo "$as_me:$LINENO: result: $DEB_HOST_ARCH" >&5
echo "${ECHO_T}$DEB_HOST_ARCH" >&6


          ac_config_files="$ac_config_files Makefile"

cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems.  If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.

_ACEOF

# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, don't put newlines in cache variables' values.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
{
  (set) 2>&1 |
    case `(ac_space=' '; set | grep ac_space) 2>&1` in
    *ac_space=\ *)
      # `set' does not quote correctly, so add quotes (double-quote
      # substitution turns \\\\ into \\, and sed turns \\ into \).
      sed -n \
	"s/'/'\\\\''/g;
	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
      ;;
    *)
      # `set' quotes correctly as required by POSIX, so do not add quotes.
      sed -n \
	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
      ;;
    esac;
} |
  sed '
     t clear
     : clear
     s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
     t end
     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
     : end' >>confcache
if diff $cache_file confcache >/dev/null 2>&1; then :; else
  if test -w $cache_file; then
    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
    cat confcache >$cache_file
  else
    echo "not updating unwritable cache $cache_file"
  fi
fi
rm -f confcache

test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'

# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
s/:*\$(srcdir):*/:/;
s/:*\${srcdir}:*/:/;
s/:*@srcdir@:*/:/;
s/^\([^=]*=[	 ]*\):*/\1/;
s/:*$//;
s/^[^=]*=[	 ]*$//;
}'
fi

# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
#
# If the first sed substitution is executed (which looks for macros that
# take arguments), then we branch to the quote section.  Otherwise,
# look for a macro that doesn't take arguments.
cat >confdef2opt.sed <<\_ACEOF
t clear
: clear
s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*([^)]*)\)[	 ]*\(.*\),-D\1=\2,g
t quote
s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\),-D\1=\2,g
t quote
d
: quote
s,[	 `~#$^&*(){}\\|;'"<>?],\\&,g
s,\[,\\&,g
s,\],\\&,g
s,\$,$$,g
p
_ACEOF
# We use echo to avoid assuming a particular line-breaking character.
# The extra dot is to prevent the shell from consuming trailing
# line-breaks from the sub-command output.  A line-break within
# single-quotes doesn't work because, if this script is created in a
# platform that uses two characters for line-breaks (e.g., DOS), tr
# would break.
ac_LF_and_DOT=`echo; echo .`
DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
rm -f confdef2opt.sed


ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
  # 1. Remove the extension, and $U if already installed.
  ac_i=`echo "$ac_i" |
	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
  # 2. Add them.
  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs

LTLIBOBJS=$ac_ltlibobjs


if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
  { { echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
   { (exit 1); exit 1; }; }
fi

: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.

debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization.  ##
## --------------------- ##

# Be Bourne compatible
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
  emulate sh
  NULLCMD=:
  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
  # is contrary to our usage.  Disable this feature.
  alias -g '${1+"$@"}'='"$@"'
elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
  set -o posix
fi
DUALCASE=1; export DUALCASE # for MKS sh

# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
  as_unset=unset
else
  as_unset=false
fi


# Work around bugs in pre-3.0 UWIN ksh.
$as_unset ENV MAIL MAILPATH
PS1='$ '
PS2='> '
PS4='+ '

# NLS nuisances.
for as_var in \
  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
  LC_TELEPHONE LC_TIME
do
  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
    eval $as_var=C; export $as_var
  else
    $as_unset $as_var
  fi
done

# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1; then
  as_expr=expr
else
  as_expr=false
fi

if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
  as_basename=basename
else
  as_basename=false
fi


# Name of the executable.
as_me=`$as_basename "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$0" : 'X\(//\)$' \| \
	 X"$0" : 'X\(/\)$' \| \
	 .     : '\(.\)' 2>/dev/null ||
echo X/"$0" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
  	  /^X\/\(\/\).*/{ s//\1/; q; }
  	  s/.*/./; q'`


# PATH needs CR, and LINENO needs CR and PATH.
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits

# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
  echo "#! /bin/sh" >conf$$.sh
  echo  "exit 0"   >>conf$$.sh
  chmod +x conf$$.sh
  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
    PATH_SEPARATOR=';'
  else
    PATH_SEPARATOR=:
  fi
  rm -f conf$$.sh
fi


  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
  # Find who we are.  Look in the path if we contain no path at all
  # relative or not.
  case $0 in
    *[\\/]* ) as_myself=$0 ;;
    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done

       ;;
  esac
  # We did not find ourselves, most probably we were run as `sh COMMAND'
  # in which case we are not to be found in the path.
  if test "x$as_myself" = x; then
    as_myself=$0
  fi
  if test ! -f "$as_myself"; then
    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
   { (exit 1); exit 1; }; }
  fi
  case $CONFIG_SHELL in
  '')
    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
  IFS=$as_save_IFS
  test -z "$as_dir" && as_dir=.
  for as_base in sh bash ksh sh5; do
	 case $as_dir in
	 /*)
	   if ("$as_dir/$as_base" -c '
  as_lineno_1=$LINENO
  as_lineno_2=$LINENO
  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
  test "x$as_lineno_1" != "x$as_lineno_2" &&
  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
	     CONFIG_SHELL=$as_dir/$as_base
	     export CONFIG_SHELL
	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
	   fi;;
	 esac
       done
done
;;
  esac

  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
  # uniformly replaced by the line number.  The first 'sed' inserts a
  # line-number line before each line; the second 'sed' does the real
  # work.  The second script uses 'N' to pair each line-number line
  # with the numbered line, and appends trailing '-' during
  # substitution so that $LINENO is not a special case at line end.
  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
  sed '=' <$as_myself |
    sed '
      N
      s,$,-,
      : loop
      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
      t loop
      s,-$,,
      s,^['$as_cr_digits']*\n,,
    ' >$as_me.lineno &&
  chmod +x $as_me.lineno ||
    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
   { (exit 1); exit 1; }; }

  # Don't try to exec as it changes $[0], causing all sort of problems
  # (the dirname of $[0] i