📄 led_flas.lst
字号:
164 =2
165 =2 /*------------------------------------------------
166 =2 IP Bit Registers
167 =2 ------------------------------------------------*/
168 =2 sbit PX0 = 0xB8;
169 =2 sbit PT0 = 0xB9;
170 =2 sbit PX1 = 0xBA;
171 =2 sbit PT1 = 0xBB;
172 =2 sbit PS = 0xBC;
173 =2 sbit PT2 = 0xBD;
174 =2
175 =2 /*------------------------------------------------
176 =2 T2CON Bit Registers
177 =2 ------------------------------------------------*/
178 =2 sbit CP_RL2= 0xC8; /* 0=Reload, 1=Capture select */
179 =2 sbit C_T2 = 0xC9; /* 0=Timer, 1=Counter */
180 =2 sbit TR2 = 0xCA; /* 0=Stop timer, 1=Start timer */
181 =2 sbit EXEN2= 0xCB; /* Timer 2 external enable */
182 =2 sbit TCLK = 0xCC; /* 0=Serial clock uses Timer 1 overflow, 1=Timer 2 */
183 =2 sbit RCLK = 0xCD; /* 0=Serial clock uses Timer 1 overflow, 1=Timer 2 */
184 =2 sbit EXF2 = 0xCE; /* Timer 2 external flag */
C51 COMPILER V6.10 LED_FLAS 04/18/2001 16:48:07 PAGE 5
185 =2 sbit TF2 = 0xCF; /* Timer 2 overflow flag */
186 =2
187 =2 /*------------------------------------------------
188 =2 T2MOD Bit Values
189 =2 ------------------------------------------------*/
190 =2 #define DCEN_ 0x01 /* 1=Timer 2 can be configured as up/down counter */
191 =2 #define T2OE_ 0x02 /* Timer 2 output enable */
192 =2
193 =2 /*------------------------------------------------
194 =2 PSW Bit Registers
195 =2 ------------------------------------------------*/
196 =2 sbit P = 0xD0;
197 =2 sbit FL = 0xD1;
198 =2 sbit OV = 0xD2;
199 =2 sbit RS0 = 0xD3;
200 =2 sbit RS1 = 0xD4;
201 =2 sbit F0 = 0xD5;
202 =2 sbit AC = 0xD6;
203 =2 sbit CY = 0xD7;
204 =2
205 =2 /*------------------------------------------------
206 =2 Interrupt Vectors:
207 =2 Interrupt Address = (Number * 8) + 3
208 =2 ------------------------------------------------*/
209 =2 #define IE0_VECTOR 0 /* 0x03 External Interrupt 0 */
210 =2 #define TF0_VECTOR 1 /* 0x0B Timer 0 */
211 =2 #define IE1_VECTOR 2 /* 0x13 External Interrupt 1 */
212 =2 #define TF1_VECTOR 3 /* 0x1B Timer 1 */
213 =2 #define SIO_VECTOR 4 /* 0x23 Serial port */
214 =2
215 =2 #define TF2_VECTOR 5 /* 0x2B Timer 2 */
216 =2 #define EX2_VECTOR 5 /* 0x2B External Interrupt 2 */
217 =2
218 =2 /*------------------------------------------------
219 =2 ------------------------------------------------*/
220 =2 #endif
221 =2
222 =2
33 =1
34 =1 // Include oscillator / chip details here
35 =1 // (essential if generic delays / timeouts are used)
36 =1 // -
37 =1 // Oscillator / resonator frequency (in Hz) e.g. (11059200UL)
38 =1 #define OSC_FREQ (12000000UL)
39 =1
40 =1 // Number of oscillations per instruction (4, 6 or 12)
41 =1 // 12 - Original 8051 / 8052 and numerous modern versions
42 =1 // 6 - Various Infineon and Philips devices, etc.
43 =1 // 4 - Dallas, etc.
44 =1 //
45 =1 // Take care with Dallas devices
46 =1 // - Timers default to *12* osc ticks unless CKCON is modified
47 =1 // - If using generic code on a Dallas device, use 12 here
48 =1 #define OSC_PER_INST (12)
49 =1
50 =1 //------------------------------------------------------------------
51 =1 // SHOULD NOT NEED TO EDIT THE SECTIONS BELOW
52 =1 //------------------------------------------------------------------
53 =1 typedef unsigned char tByte;
54 =1 typedef unsigned int tWord;
55 =1 typedef unsigned long tLong;
56 =1
C51 COMPILER V6.10 LED_FLAS 04/18/2001 16:48:07 PAGE 6
57 =1 // Misc #defines
58 =1 #ifndef TRUE
59 =1 #define FALSE 0
60 =1 #define TRUE (!FALSE)
61 =1 #endif
62 =1
63 =1 #define RETURN_NORMAL (bit) 0
64 =1 #define RETURN_ERROR (bit) 1
65 =1
66 =1
67 =1 //------------------------------------------------------------------
68 =1 // Interrupts
69 =1 // - see Chapter 13.
70 =1 //------------------------------------------------------------------
71 =1
72 =1 // Generic 8051/52 timer interrupts (used in most schedulers)
73 =1 #define INTERRUPT_Timer_0_Overflow 1
74 =1 #define INTERRUPT_Timer_1_Overflow 3
75 =1 #define INTERRUPT_Timer_2_Overflow 5
76 =1
77 =1 // Additional interrupts (used in shared-clock schedulers)
78 =1 #define INTERRUPT_EXTERNAL_0 0
79 =1 #define INTERRUPT_EXTERNAL_1 2
80 =1 #define INTERRUPT_UART_Rx_Tx 4
81 =1 #define INTERRUPT_CAN_c515c 17
82 =1
83 =1 //------------------------------------------------------------------
84 =1 // Error codes
85 =1 // - see Chapter 14.
86 =1 //------------------------------------------------------------------
87 =1
88 =1 #define ERROR_SCH_TOO_MANY_TASKS (1)
89 =1 #define ERROR_SCH_CANNOT_DELETE_TASK (2)
90 =1
91 =1 #define ERROR_SCH_WAITING_FOR_SLAVE_TO_ACK (3)
92 =1 #define ERROR_SCH_WAITING_FOR_START_COMMAND_FROM_MASTER (3)
93 =1
94 =1 #define ERROR_SCH_ONE_OR_MORE_SLAVES_DID_NOT_START (4)
95 =1 #define ERROR_SCH_LOST_SLAVE (5)
96 =1
97 =1 #define ERROR_SCH_CAN_BUS_ERROR (6)
98 =1
99 =1 #define ERROR_I2C_WRITE_BYTE (10)
100 =1 #define ERROR_I2C_READ_BYTE (11)
101 =1 #define ERROR_I2C_WRITE_BYTE_AT24C64 (12)
102 =1 #define ERROR_I2C_READ_BYTE_AT24C64 (13)
103 =1 #define ERROR_I2C_DS1621 (14)
104 =1
105 =1 #define ERROR_USART_TI (21)
106 =1 #define ERROR_USART_WRITE_CHAR (22)
107 =1
108 =1 #define ERROR_SPI_EXCHANGE_BYTES_TIMEOUT (31)
109 =1 #define ERROR_SPI_X25_TIMEOUT (32)
110 =1 #define ERROR_SPI_MAX1110_TIMEOUT (33)
111 =1
112 =1 #define ERROR_ADC_MAX150_TIMEOUT (44)
113 =1
114 =1 #endif
115 =1
116 =1 /*------------------------------------------------------------------*-
117 =1 ---- END OF FILE -------------------------------------------------
118 =1 -*------------------------------------------------------------------*/
C51 COMPILER V6.10 LED_FLAS 04/18/2001 16:48:07 PAGE 7
25 #include "Port.h"
1 =1 /*------------------------------------------------------------------*-
2 =1
3 =1 Port.H (v1.00)
4 =1
5 =1 ------------------------------------------------------------------
6 =1
7 =1 'Port Header' (see Chap 10) for the project SCI_DM (Chap 26)
8 =1
9 =1
10 =1 COPYRIGHT
11 =1 ---------
12 =1
13 =1 This code is from the book:
14 =1
15 =1 PATTERNS FOR TIME-TRIGGERED EMBEDDED SYSTEMS by Michael J. Pont
16 =1 [Pearson Education, 2001; ISBN: 0-201-33138-1].
17 =1
18 =1 This code is copyright (c) 2001 by Michael J. Pont.
19 =1
20 =1 See book for copyright details and other information.
21 =1
22 =1 -*------------------------------------------------------------------*/
23 =1
24 =1 // ------ Sch51.C ----------------------------------------
25 =1
26 =1 // Comment this line out if error reporting is NOT required
27 =1 #define SCH_REPORT_ERRORS
28 =1
29 =1 #ifdef SCH_REPORT_ERRORS
30 =1 // The port on which error codes will be displayed
31 =1 // ONLY USED IF ERRORS ARE REPORTED
32 =1 #define Error_port P3
33 =1
34 =1 #endif
35 =1
36 =1 // ------ SCI_DM.C -------------------------------------------------
37 =1
38 =1 // This pin is wired to the interrupt input pin
39 =1 // (usually Pin3.2) of the slave microcontroller
40 =1 sbit Interrupt_output_pin = P2^7;
41 =1
42 =1 // This pin is wired to the 'watchdog' pin on the slave
43 =1 sbit Slave_watchdog_pin = P2^6;
44 =1
45 =1 // This port is used to transfer data to / from the slave
46 =1 #define SCI_transfer_port P0
47 =1
48 =1
49 =1 // ------ TLight_B.C ----------------------------------------------
50 =1
51 =1 sbit Red_light = (P2^0);
52 =1 sbit Amber_light = (P2^1);
53 =1 sbit Green_light = (P2^2);
54 =1
55 =1
56 =1 // ------ LED_Flas.C -----------------------------------------------
57 =1
58 =1 // For flashing LED
59 =1 sbit LED_pin = P1^0;
60 =1
61 =1
C51 COMPILER V6.10 LED_FLAS 04/18/2001 16:48:07 PAGE 8
62 =1 /*------------------------------------------------------------------*-
63 =1 ---- END OF FILE -------------------------------------------------
64 =1 -*------------------------------------------------------------------*/
65 =1
66 =1
67 =1
26 #include "LED_flas.h"
1 =1 /*------------------------------------------------------------------*-
2 =1
3 =1 LED_flas.H (v1.00)
4 =1
5 =1 ------------------------------------------------------------------
6 =1
7 =1 - See LED_flas.C for details.
8 =1
9 =1
10 =1 COPYRIGHT
11 =1 ---------
12 =1
13 =1 This code is from the book:
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -