makefile.in

konqueror3 embedded版本, KDE环境下的当家浏览器的嵌入式版本源码包.

	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  konq-embed/add-ons/pppdialer/pics/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  konq-embed/add-ons/pppdialer/pics/Makefile
	cd $(top_srcdir) && perl admin/am_edit konq-embed/add-ons/pppdialer/pics/Makefile.in
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
uninstall-info-am:
install-actionDATA: $(action_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(actiondir)" || $(mkdir_p) "$(DESTDIR)$(actiondir)"
	@list='$(action_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(actionDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(actiondir)/$$f'"; \
	  $(actionDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(actiondir)/$$f"; \
	done

uninstall-actionDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(action_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(actiondir)/$$f'"; \
	  rm -f "$(DESTDIR)$(actiondir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(actiondir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#>- clean: clean-recursive
#>+ 1
clean: kde-rpo-clean  clean-recursive

#>- clean-am: clean-generic clean-libtool mostlyclean-am
#>+ 1
clean-am: clean-bcheck  clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-actionDATA

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-actionDATA uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \
	clean clean-generic clean-libtool clean-recursive ctags \
	ctags-recursive distclean distclean-generic distclean-libtool \
	distclean-recursive distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-actionDATA install-am \
	install-data install-data-am install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
	tags tags-recursive uninstall uninstall-actionDATA \
	uninstall-am uninstall-info-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:

#>+ 2
KDE_DIST=connect_creating.xpm connect_no.png connect_established.xpm Makefile.in connect_creating.png connect_no.xpm connect_established.png Makefile.am 

#>+ 2
docs-am:

#>+ 15
force-reedit:
		@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  konq-embed/add-ons/pppdialer/pics/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  konq-embed/add-ons/pppdialer/pics/Makefile
	cd $(top_srcdir) && perl admin/am_edit konq-embed/add-ons/pppdialer/pics/Makefile.in


#>+ 21
clean-bcheck: 
	rm -f *.bchecktest.cc *.bchecktest.cc.class a.out

bcheck: bcheck-recursive

bcheck-am:
	@for i in ; do \
	    if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then \
	        echo "int main() {return 0;}" > $$i.bchecktest.cc ; \
	        echo "#include \"$$i\"" >> $$i.bchecktest.cc ; \
	        echo "$$i"; \
	        if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS)  --dump-class-hierarchy -c $$i.bchecktest.cc; then \
	            rm -f $$i.bchecktest.cc; exit 1; \
	        fi ; \
	        echo "" >> $$i.bchecktest.cc.class; \
	        perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; }; \
	        rm -f a.out; \
	    fi ; \
	done


#>+ 3
final:
	$(MAKE) all-am

#>+ 3
final-install:
	$(MAKE) install-am

#>+ 3
no-final:
	$(MAKE) all-am

#>+ 3
no-final-install:
	$(MAKE) install-am

#>+ 3
kde-rpo-clean:
	-rm -f *.rpo

#>+ 3
nmcheck: 
nmcheck-am: nmcheck