📄 main.pas

📁 西京票据管理系统刚刚获得
💻 PAS
📖 第 1 页 / 共 2 页
字号:
12 下一页
unit main;

interface

uses
  Windows, Messages, SysUtils, Variants, Classes, Graphics, Controls, Forms,
  Dialogs, ExtCtrls, Buttons, ToolWin, ComCtrls, Menus, dxExEdtr, dxTL,
  dxDBCtrl, dxDBGrid, DB, dxCntner, ImgList, StdCtrls, SUISideChannel,
  Grids, DBGrids;

type
  Tfrmmain = class(TForm)
    MainMenu1: TMainMenu;
    N1: TMenuItem;
    ToolBar1: TToolBar;
    SpeedButton1: TSpeedButton;
    SpeedButton2: TSpeedButton;
    SpeedButton3: TSpeedButton;
    SpeedButton4: TSpeedButton;
    ImageList1: TImageList;
    DSwsq: TDataSource;
    DSyyq: TDataSource;
    N2: TMenuItem;
    N3: TMenuItem;
    N4: TMenuItem;
    N5: TMenuItem;
    SpeedButton7: TSpeedButton;
    SpeedButton8: TSpeedButton;
    PMHX: TPopupMenu;
    N7: TMenuItem;
    N8: TMenuItem;
    N9: TMenuItem;
    N10: TMenuItem;
    N11: TMenuItem;
    N12: TMenuItem;
    DSlsdnju: TDataSource;
    SpeedButton5: TSpeedButton;
    N6: TMenuItem;
    SpeedButton6: TSpeedButton;
    N13: TMenuItem;
    N14: TMenuItem;
    PopupMenu1: TPopupMenu;
    N15: TMenuItem;
    StatusBar1: TStatusBar;
    PageControl1: TPageControl;
    TabSheet1: TTabSheet;
    TabSheet2: TTabSheet;
    Panel1: TPanel;
    Panel2: TPanel;
    Panel4: TPanel;
    dxDBGrid1: TdxDBGrid;
    dxDBGrid1Column1: TdxDBGridColumn;
    dxDBGrid1Column2: TdxDBGridColumn;
    dxDBGrid1Column3: TdxDBGridColumn;
    dxDBGrid1Column4: TdxDBGridColumn;
    dxDBGrid1Column5: TdxDBGridColumn;
    dxDBGrid1Column6: TdxDBGridColumn;
    dxDBGrid1Column7: TdxDBGridColumn;
    dxDBGrid1Column8: TdxDBGridColumn;
    Splitter1: TSplitter;
    Label1: TLabel;
    Label2: TLabel;
    RadioButton1: TRadioButton;
    RadioButton2: TRadioButton;
    RadioButton3: TRadioButton;
    SpeedButton9: TSpeedButton;
    Image1: TImage;
    Image2: TImage;
    Image3: TImage;
    Label3: TLabel;
    Label4: TLabel;
    Label5: TLabel;
    Label6: TLabel;
    Label7: TLabel;
    Label8: TLabel;
    Panel5: TPanel;
    suiSideChannel2: TsuiSideChannel;
    Panel6: TPanel;
    Panel7: TPanel;
    Panel8: TPanel;
    DShj: TDataSource;
    DBGrid1: TDBGrid;
    Panel9: TPanel;
    DBGrid2: TDBGrid;
    Label9: TLabel;
    Label10: TLabel;
    DStypehj: TDataSource;
    dxDBGrid3: TdxDBGrid;
    dxDBGrid3Column1: TdxDBGridColumn;
    dxDBGrid3Column2: TdxDBGridColumn;
    dxDBGrid3Column3: TdxDBGridColumn;
    dxDBGrid3Column4: TdxDBGridColumn;
    dxDBGrid3Column5: TdxDBGridColumn;
    dxDBGrid3Column6: TdxDBGridColumn;
    dxDBGrid3Column7: TdxDBGridColumn;
    dxDBGrid3Column8: TdxDBGridColumn;
    CheckBox1: TCheckBox;
    Panel3: TPanel;
    dxDBGrid2: TdxDBGrid;
    dxDBGrid2Column1: TdxDBGridColumn;
    dxDBGrid2Column2: TdxDBGridColumn;
    dxDBGrid2Column3: TdxDBGridColumn;
    procedure SpeedButton1Click(Sender: TObject);
    procedure FormShow(Sender: TObject);
    procedure N2Click(Sender: TObject);
    procedure N3Click(Sender: TObject);
    procedure SpeedButton4Click(Sender: TObject);
    procedure SpeedButton3Click(Sender: TObject);
    procedure SpeedButton2Click(Sender: TObject);
    procedure RadioButton1Click(Sender: TObject);
    procedure RadioButton2Click(Sender: TObject);
    procedure RadioButton3Click(Sender: TObject);
    procedure SpeedButton7Click(Sender: TObject);
    procedure SpeedButton8Click(Sender: TObject);
    procedure SpeedButton5Click(Sender: TObject);
    procedure N7Click(Sender: TObject);
    procedure N8Click(Sender: TObject);
    procedure N9Click(Sender: TObject);
    procedure N11Click(Sender: TObject);
    procedure N6Click(Sender: TObject);
    procedure FormClose(Sender: TObject; var Action: TCloseAction);
    procedure N5Click(Sender: TObject);
    procedure SpeedButton6Click(Sender: TObject);
    procedure N13Click(Sender: TObject);
    procedure N14Click(Sender: TObject);
    procedure N15Click(Sender: TObject);
    procedure dxDBGrid2DblClick(Sender: TObject);
    procedure SpeedButton9Click(Sender: TObject);
    procedure DBGrid1DblClick(Sender: TObject);
    procedure CheckBox1Click(Sender: TObject);
  private
    { Private declarations }
  public
    { Public declarations }
  end;

var
  frmmain: Tfrmmain;

implementation
uses UDM,addperson,changeperson,ztchoose,allmenuadd,PLACEBB,me,NOTUSE,XZSJ,changedj,Unitsummoney,unitaddlist,Unitserchnerveruse;
{$R *.dfm}

procedure Tfrmmain.SpeedButton1Click(Sender: TObject);
begin
 MessageBox(Handle,'确认要退出系统吗？','系统提示',MB_OKCANCEL+MB_OK);
  close;
 end;

procedure Tfrmmain.FormShow(Sender: TObject);
begin
  if  dm.ADOLOGIN.FieldByName('userid').AsString<>'0001' then
     SpeedButton5.Enabled:=False;      

  DM.hrq:=StrToDateTime(formatdatetime('yyyy-mm-dd',Now));
  StatusBar1.Panels[0].Text:='在历史单据中可以查询历史的单据';
  PageControl1.TabIndex:=0;
  with dm.ADOhj  do
    begin
      Close;
      SQL.Clear;
      SQL.Add('select libnnumberplace,sum(jine) as jine from lsdj_tb');
      SQL.Add('group by libnnumberplace');
      SQL.Add('order by libnnumberplace');
      Prepared;
      Open;
    end;
   Panel3.Visible:=False;
end;

procedure Tfrmmain.N2Click(Sender: TObject);
begin
 DM.ADOLOGIN.Append;
 frmaddperson:=Tfrmaddperson.Create(SELF);
 frmaddperson.ShowModal;
 FreeAndNil(frmaddperson);
end;

procedure Tfrmmain.N3Click(Sender: TObject);
begin
  if DM.ADOLOGIN.RecordCount>0 then
  begin
   frmchangeperson:=Tfrmchangeperson.Create(Self);
    with frmchangeperson do
    begin
      DBEdit1.Text:=dm.ADOLOGIN.fieldbyname('userid').AsString;
      DBEdit2.Text:=dm.ADOLOGIN.fieldbyname('username').AsString;
      DBEdit3.Text:=dm.ADOLOGIN.fieldbyname('userpsd').AsString;
    end;
   frmchangeperson.ShowModal;
   FreeAndNil(frmchangeperson);
  end;
end;

procedure Tfrmmain.SpeedButton4Click(Sender: TObject);
begin
  frmallmenuadd:=Tfrmallmenuadd.Create(Self);
  frmallmenuadd.ShowModal;
  FreeAndNil(frmallmenuadd);
end;

procedure Tfrmmain.SpeedButton3Click(Sender: TObject);
begin
 FRMPLACEBBRQ:=TFRMPLACEBBRQ.Create(Self);
 FRMPLACEBBRQ.ShowModal;
 FreeAndNil(FRMPLACEBBRQ);
end;

procedure Tfrmmain.SpeedButton2Click(Sender: TObject);
begin
   frmme:=Tfrmme.Create(Self);
   frmme.ShowModal;
   FreeAndNil(frmme);
end;

{procedure Tfrmmain.SpeedButton6Click(Sender: TObject);
begin
 FRMNOTUSE:=TFRMNOTUSE.Create(SELF);
 FRMNOTUSE.Caption:='未使用单据';
 FRMNOTUSE.ShowModal;
 FreeAndNil(FRMNOTUSE);
end; }

{procedure Tfrmmain.N6Click(Sender: TObject);
begin
  SpeedButton6Click(Sender);
end;}

procedure Tfrmmain.RadioButton1Click(Sender: TObject);
begin
 if dm.HDM='01' then
 begin
   with dm.ADOCODE do
     begin
       close;
       SQL.Clear;
       SQL.Add('select * from libnumberls');
       SQL.Add('where zt<>''已结'' and libnumberplace=''前台''');
       SQL.Add('order by numbertype');
       Prepared;
       Open;
     end;
 end
 else
 if DM.HDM='02' then
 begin
   with dm.ADOCODE do
     begin
       close;
       SQL.Clear;
       SQL.Add('select * from libnumberls');
       SQL.Add('where zt<>''已结'' and libnumberplace=''大堂吧''');
       SQL.Add('order by numbertype');

       Prepared;
       Open;
     end;
 end
 else
 if dm.HDM='03' then
 begin
   with dm.ADOCODE do
     begin
       close;
       SQL.Clear;
       SQL.Add('select * from libnumberls');
       SQL.Add('where zt<>''已结'' and libnumberplace=''西餐厅''');
       SQL.Add('order by numbertype');

       Prepared;
       Open;
     end;
 end
 else
 if DM.HDM='04' then
 begin
   with dm.ADOCODE do
     begin
       close;
       SQL.Clear;
       SQL.Add('select * from libnumberls');
       SQL.Add('where zt<>''已结'' and libnumberplace=''康乐部''');
       SQL.Add('order by numbertype');
       Prepared;
       Open;
     end;
 end;
  dxDBGrid1.FullExpand;
end;

procedure Tfrmmain.RadioButton2Click(Sender: TObject);
begin
 if dm.HDM='01' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where zt=''已结'' and libnumberplace=''前台''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end
 else
 if dm.HDM='02' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where zt=''已结'' and libnumberplace=''大堂吧''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end
 else
 if dm.HDM='03' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where zt=''已结'' and libnumberplace=''西餐厅''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end
 else
 if dm.HDM='04' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where zt=''已结'' and libnumberplace=''康乐部''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end;
  dxDBGrid1.FullExpand;

end;

procedure Tfrmmain.RadioButton3Click(Sender: TObject);
begin
 if dm.HDM='01' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where libnumberplace=''前台''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end
 else
 if dm.HDM='02' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where libnumberplace=''大堂吧''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end
 else
 if dm.HDM='03' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where libnumberplace=''西餐厅''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end
 else
 if dm.HDM='04' then
 begin
  with dm.ADOCODE do
   begin
     close;
     SQL.Clear;
     SQL.Add('select * from libnumberls');
     SQL.Add('where libnumberplace=''康乐部''');
     SQL.Add('order by numbertype');
     Prepared;
     Open;
   end;
 end;
   dxDBGrid1.FullExpand;

end;

procedure Tfrmmain.SpeedButton7Click(Sender: TObject);
begin
 FRMNOTUSE:=TFRMNOTUSE.Create(SELF);
 FRMNOTUSE.Caption:='核销单据';
 FRMNOTUSE.ShowModal;
 FreeAndNil(FRMNOTUSE);
end;

procedure Tfrmmain.SpeedButton8Click(Sender: TObject);
begin
  DM.ADOTEMP.Close;
  DM.ADOTEMP.Open;
  DM.ADOCODE.Close;
  DM.ADOCODE.Open;
  dxDBGrid1.FullExpand;
  dxDBGrid2.FullExpand;
end;

procedure Tfrmmain.SpeedButton5Click(Sender: TObject);
begin
  frmsj:=Tfrmsj.Create(Self);
  frmsj.ShowModal;
  FreeAndNil(frmsj);
end;

procedure Tfrmmain.N7Click(Sender: TObject);
begin
    frmchangedj:=Tfrmchangedj.Create(Self);
    with frmchangedj do
     begin
       Label1.Caption:=DM.ADOCODE.fieldbyname('numberid').AsString;
       ComboBox1.Text:=dm.ADOCODE.fieldbyname('zt').AsString;
       ComboBox2.Text:=dm.ADOCODE.fieldbyname('numbertype').AsString;
       dxCurrencyEdit1.Value:=DM.ADOCODE.fieldbyname('jine').AsCurrency;
       DateTimePicker1.Date:=dm.ADOCODE.fieldbyname('rq').AsDateTime;
     end;
    frmchangedj.ShowModal;
    FreeAndNil(frmchangedj);
end;

procedure Tfrmmain.N8Click(Sender: TObject);
  begin
      dm.ADOCon1.BeginTrans;
      try
         with dm.ADOTP do          //把核销后的单据插入未核销的表中
           begin
             Close;
             SQL.Clear;
             SQL.Add('insert into libnumber');
             SQL.Add('(list,numberid,numbertype,hxbz,djdate,lypername,JINE,A,B,libnumberplace,zt,sxdm)');
             SQL.Add('select list,numberid,numbertype,hxbz,rq,lypername,JINE,A,B,libnumberplace,zt,sxdm from libnumberls');
             SQL.Add('where numberid=:id and numbertype=:type and sxdm=:dm');
             parameters.ParamByName('id').Value:=dm.ADOCODE.fieldbyname('numberid').AsString;
             Parameters.ParamByName('type').Value:=dm.ADOCODE.fieldbyname('numbertype').AsString;
             Parameters.ParamByName('dm').Value:=dm.HDM;
             ExecSQL;
           end;

          with dm.ADOTP do        //然后删除核销后的单据
           begin
12 下一页
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -