segcode.h

智能数字电流表。双CPU工作

#ifndef SEGCODE_H
#define SEGCODE_H

#define uchar unsigned char
#define uint unsigned int
#define byte unsigned char
#define word unsigned int
#define dword unsigned long 

//段码0,1,2,3,4,5,6,7,8,9
uchar code uLEDChar[] = {0x3f, 0x06, 0x9b, 0x8f, 0xa6, 0xad, 0xbd, 0x07, 0xbf, 0xaf};

//提示
uchar code ProgHint[]  = {0x00, 0xB3, 0x90, 0x9C, 0xAF};  // Prog
uchar code A_YSHint[]  = {0x00, 0xB7, 0x80, 0xA6, 0xAD};  // A-YS
uchar code In_OuHint[] = {0x06, 0x94, 0x80, 0x3F, 0x1C};  //In-Ou
uchar code INPHint[]   = {0x00, 0x00, 0x06, 0x37, 0xB3};  //INP
uchar code OUPHint[]   = {0x00, 0x00, 0x3F, 0x3E, 0xB3};  //OUP
uchar code In_LHint[]  = {0x00, 0x00, 0x06, 0xD4, 0x38};  //In.L
uchar code In_HHint[]  = {0x00, 0x00, 0x06, 0xD4, 0xB6};  //In.H   
uchar code PoInHint[]  = {0x00, 0xB3, 0x9C, 0x06, 0x94};  //PoIn 
uchar code ALRHint[]   = {0x00, 0x00, 0xB7, 0x38, 0xB7};  //ALR
uchar code ONHint[]    = {0x00, 0x00, 0x00, 0x3F, 0x37};  //ON
uchar code OFFHint[]   = {0x00, 0x00, 0x3F, 0xB1, 0xB1};  //OFF
uchar code AL_LHint[]  = {0x00, 0x00, 0xB7, 0x78, 0x38};  //AL.L
uchar code AL_HHint[]  = {0x00, 0x00, 0xB7, 0x78, 0xB6};  //AL.H
uchar code SecrHint[]  = {0x00, 0xAD, 0xB9, 0x98, 0x90};  //Secr
uchar code Ad_BdHint[] = {0xB7, 0x9E, 0x80, 0xBF, 0x9E};  //Ad-Bd
uchar code AddrHint[]  = {0x00, 0xB7, 0x9E, 0x9e, 0x90};  //Addr
uchar code bAudHint[]  = {0x00, 0xBC, 0xb7, 0x1C, 0x9E};  //bAud 
uchar code PwdHint[]   = {0xB3, 0xB6, 0xB6, 0xB6, 0xB6};  //密码提示
uchar code SaveHint[]  = {0x00, 0xAD, 0xB7, 0x3E, 0xB9};  //SAVE
uchar code ErrorHint[] = {0xB9, 0x90, 0x90, 0x9C, 0x90};  //Error
uchar code Bauds[4][5] = {
	{0xBC, 0x06, 0x9B, 0x3F, 0x3F}, //1200
	{0xBC, 0x9B, 0xA6, 0x3F, 0x3F}, //b2400
	{0xBC, 0xA6, 0xBF, 0x3F, 0x3F},  //b4800
	{0xBC, 0xAF, 0xBD, 0x3F, 0x3F},  //b9600
};
#endif