clkscan2.tan.summary

来自「采用Quartus2编写的数码管扫描显示电路 共有三个电路 电路1：当按下启」· SUMMARY 代码 · 共 57 行

--------------------------------------------------------------------------------------
Timing Analyzer Summary
--------------------------------------------------------------------------------------

Type           : Worst-case tsu
Slack          : N/A
Required Time  : None
Actual Time    : 8.495 ns
From           : reset
To             : button:inst4|signal
From Clock     : 
To Clock       : clk
Failed Paths   : 0

Type           : Worst-case tco
Slack          : N/A
Required Time  : None
Actual Time    : 13.409 ns
From           : clkscan:inst6|data[1]
To             : out[0]
From Clock     : clk
To Clock       : 
Failed Paths   : 0

Type           : Worst-case th
Slack          : N/A
Required Time  : None
Actual Time    : -2.990 ns
From           : start
To             : button:inst2|cnt[0]~reg0
From Clock     : 
To Clock       : clk
Failed Paths   : 0

Type           : Clock Setup: 'clk'
Slack          : N/A
Required Time  : None
Actual Time    : 126.20 MHz ( period = 7.924 ns )
From           : clkscan:inst6|enable
To             : clkscan:inst6|data[2]
From Clock     : clk
To Clock       : clk
Failed Paths   : 0

Type           : Total number of failed paths
Slack          : 
Required Time  : 
Actual Time    : 
From           : 
To             : 
From Clock     : 
To Clock       : 
Failed Paths   : 0

--------------------------------------------------------------------------------------