clkscan1.fit.qmsg

采用Quartus2编写的数码管扫描显示电路 共有三个电路 电路1：当按下启动计时按钮时

{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "4 unused 3.30 0 4 0 " "Info: Number of I/O pins in group: 4 (unused VREF, 3.30 VCCIO, 0 input, 4 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "LVTTL. " "Info: I/O standards used: LVTTL." {  } {  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use unused 3 41 " "Info: I/O bank number 1 does not use VREF pins and has unused VCCIO pins. 3 total pin(s) used --  41 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use unused 0 42 " "Info: I/O bank number 2 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  42 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use 3.30V 18 27 " "Info: I/O bank number 3 does not use VREF pins and has 3.30V VCCIO pins. 18 total pin(s) used --  27 pins available" {  } {  } 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use unused 0 42 " "Info: I/O bank number 4 does not use VREF pins and has unused VCCIO pins. 0 total pin(s) used --  42 pins available" {  } {  } 0}  } {  } 0}  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "1.590 ns register register " "Info: Estimated most critical path is register to register delay of 1.590 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns clkscan:inst5\|enable 1 REG LAB_X52_Y25 2 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X52_Y25; Fanout = 2; REG Node = 'clkscan:inst5\|enable'" {  } { { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { clkscan:inst5|enable } "NODE_NAME" } "" } } { "clkscan.v" "" { Text "e:/实验四 数码管扫描显示电路/clkscan1/clkscan.v" 7 -1 0 } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.626 ns) + CELL(0.114 ns) 0.740 ns clkscan:inst5\|scan_data\[0\]~199 2 COMB LAB_X52_Y25 3 " "Info: 2: + IC(0.626 ns) + CELL(0.114 ns) = 0.740 ns; Loc. = LAB_X52_Y25; Fanout = 3; COMB Node = 'clkscan:inst5\|scan_data\[0\]~199'" {  } { { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "0.740 ns" { clkscan:inst5|enable clkscan:inst5|scan_data[0]~199 } "NODE_NAME" } "" } } { "clkscan.v" "" { Text "e:/实验四 数码管扫描显示电路/clkscan1/clkscan.v" 4 -1 0 } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.372 ns) + CELL(0.478 ns) 1.590 ns clkscan:inst5\|scan_data\[2\] 3 REG LAB_X52_Y25 11 " "Info: 3: + IC(0.372 ns) + CELL(0.478 ns) = 1.590 ns; Loc. = LAB_X52_Y25; Fanout = 11; REG Node = 'clkscan:inst5\|scan_data\[2\]'" {  } { { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "0.850 ns" { clkscan:inst5|scan_data[0]~199 clkscan:inst5|scan_data[2] } "NODE_NAME" } "" } } { "clkscan.v" "" { Text "e:/实验四 数码管扫描显示电路/clkscan1/clkscan.v" 4 -1 0 } }  } 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "0.592 ns 37.23 % " "Info: Total cell delay = 0.592 ns ( 37.23 % )" {  } {  } 0} { "Info" "ITDB_TOTAL_IC_DELAY" "0.998 ns 62.77 % " "Info: Total interconnect delay = 0.998 ns ( 62.77 % )" {  } {  } 0}  } { { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "1.590 ns" { clkscan:inst5|enable clkscan:inst5|scan_data[0]~199 clkscan:inst5|scan_data[2] } "NODE_NAME" } "" } }  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 0 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 0%." {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0}
{ "Warning" "WFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "9 " "Warning: The following 9 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "out\[7\] GND " "Info: Pin out\[7\] has GND driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 136 944 1120 152 "out\[7..0\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "out\[7\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { out[7] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { out[7] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[8\] VCC " "Info: Pin scan_en\[8\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[8\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[8] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[8] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[7\] VCC " "Info: Pin scan_en\[7\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[7\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[7] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[7] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[6\] VCC " "Info: Pin scan_en\[6\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[6\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[6] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[6] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[5\] VCC " "Info: Pin scan_en\[5\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[5\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[5] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[5] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[4\] VCC " "Info: Pin scan_en\[4\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[4\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[4] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[4] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[3\] VCC " "Info: Pin scan_en\[3\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[3\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[3] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[3] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[2\] VCC " "Info: Pin scan_en\[2\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[2\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[2] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[2] } "NODE_NAME" } }  } 0} { "Info" "IFSAC_FSAC_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "scan_en\[1\] VCC " "Info: Pin scan_en\[1\] has VCC driving its datain port" {  } { { "clkscan1.bdf" "" { Schematic "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.bdf" { { 56 776 952 72 "scan_en\[8..1\]" "" } } } } { "c:/altera/quartus50/bin/Assignment Editor.qase" "" { Assignment "c:/altera/quartus50/bin/Assignment Editor.qase" 1 { { 0 "scan_en\[1\]" } } } } { "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" "" { Report "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1_cmp.qrpt" Compiler "clkscan1" "UNKNOWN" "V1" "e:/实验四 数码管扫描显示电路/clkscan1/db/clkscan1.quartus_db" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/" "" "" { scan_en[1] } "NODE_NAME" } "" } } { "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" { Floorplan "e:/实验四 数码管扫描显示电路/clkscan1/clkscan1.fld" "" "" { scan_en[1] } "NODE_NAME" } }  } 0}  } {  } 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 1  Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_BANNER_TIME" "Mon Apr 14 20:57:26 2008 " "Info: Processing ended: Mon Apr 14 20:57:26 2008" {  } {  } 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:06 " "Info: Elapsed time: 00:00:06" {  } {  } 0}  } {  } 0}