headers.all

su 的源代码库

SUKILL - zero out traces					
SULOG -- time axis log-stretch of seismic traces		
char    *sdoc[] = {
SUMEAN - get the mean values of data traces				",	
SUMEDIAN - MEDIAN filter about a user-defined polygonal curve with	
SUMIGFD - 45-90 degree Finite difference migration for zero-offset data.
SUMIGFFD - Fourier finite difference migration for		    
SUMIGGBZOAN - MIGration via Gaussian beams ANisotropic media (P-wave)	
SUMIGGBZO - MIGration via Gaussian Beams of Zero-Offset SU data	
SUMIGPREFD --- The 2-D prestack common-shot 45-90 degree   		
SUMIGPREFFD - The 2-D prestack common-shot Fourier finite-difference	
SUMIGPREPSPI --- The 2-D PREstack commom-shot Phase-Shift-Plus 	
SUMIGPRESP - The 2-D prestack common-shot split-step Fourier		", 
SUMIGPS - MIGration by Phase Shift with turning rays			
SUMIGPSPI - Gazdag's phase-shift plus interpolation migration         
SUMIGPSTI - MIGration by Phase Shift for TI media with turning rays	
SUMIGSPLIT - Split-step depth migration for zero-offset data.         
SUMIGTK - MIGration via T-K domain method for common-midpoint stacked data
SUMIGTOPO2D - Kirchhoff Depth Migration of 2D postack/prestack data	
SUMIX - compute weighted moving average (trace MIX) on a panel	
SUMIXGATHERS - mix two gathers					
SUMUTE - mute above (or below) a user-defined polygonal curve with	", 
SUNAN - remove NaNs & Infs from the input stream		
SUNHMOSPIKE - generates SPIKE test data set with a choice of several   
SUNMO - NMO for an arbitrary velocity function of time and CDP	     
SUNORMALIZE - Trace balancing by rms, max, or median		", 
SUNULL - create null (all zeroes) traces	 		
SUOCEXT - smaller Offset EXTrapolation via Offset Continuation        
SUOLDTONEW - convert existing su data to xdr format		
SUOP2 - do a binary operation on two data sets			
SUOP - do unary arithmetic operation on segys 		
SUPACK1 - pack segy trace data into chars			
SUPACK2 - pack segy trace data into 2 byte shorts		
SUPASTE - paste existing SEGY headers on existing data	
SUPEF - Wiener predictive error filtering				
SUPERMUTE - permute or transpose a 3d datacube	 		
SUPGC   -   Programmed Gain Control--apply agc like function	
SUPICKAMP - pick amplitudes within user defined and resampled window	
SUPLANE - create common offset data file with up to 3 planes	
SUPOFILT - POlarization FILTer for three-component data               
SUPOLAR - POLarization analysis of three-component data               
SUPUT - Connect SU program to file descriptor for output stream.	
SUPWS - Phase stack or phase-weighted stack (PWS) of adjacent traces	
SUQUANTILE - display some quantiles or ranks of a data set            
SURADON - compute forward or reverse Radon transform or remove multiples
SURAMP - Linearly taper the start and/or end of traces to zero.	
SURANGE - get max and min values for non-zero header entries	
SURECIP - sum opposing offsets in prepared data (see below)	
SUREDUCE - convert traces to display in reduced time		", 
SUREFCON -  Convolution of user-supplied Forward and Reverse		
SURELANAN - REsiduaL-moveout semblance ANalysis for ANisotropic media	
SURELAN - compute residual-moveout semblance for cdp gathers based	
SURESAMP - Resample in time					
SURESSTAT - Surface consistent source and receiver statics calculation
SUSHAPE - Wiener shaping filter					
SUSHIFT - shifted/windowed traces in time				
SUSHW - Set one or more Header Words using trace number, mod and	
SUSORT - sort on any segy header keywords			
SUSORTY - make a small 2-D common shot off-end  		
SUSPECFK - F-K Fourier SPECtrum of data set			
SUSPECFX - Fourier SPECtrum (T -> F) of traces 		
SUSPECK1K2 - 2D (K1,K2) Fourier SPECtrum of (x1,x2) data set		
SUSPIKE - make a small spike data set 			
SUSPLIT - Split traces into different output files by keyword value	
SUSHW - Set one or more Header Words using trace number, mod and	
SUSTACK - stack adjacent traces having the same key header word
SUSTATIC - Elevation static corrections, apply corrections from	
SUSTATICRRS - Elevation STATIC corrections, apply corrections from	
SUSTKVEL - convert constant dip layer interval velocity model to the	
SUSTOLT - Stolt migration for stacked data or common-offset gathers	
SUSTRIP - remove the SEGY headers from the traces		
SUSWAPBYTES - SWAP the BYTES in SU data to convert data from big endian
SUSYNCZ - SYNthetic seismograms for piecewise constant V(Z) function	
SUSYNLV - SYNthetic seismograms for Linear Velocity function		
SUSYNLVCW - SYNthetic seismograms for Linear Velocity function	
SUSYNLVFTI - SYNthetic seismograms for Linear Velocity function in a  
SUSYNVXZ - SYNthetic seismograms of common offset V(X,Z) media via	
SUSYNVXZCS - SYNthetic seismograms of common shot in V(X,Z) media via	
SUTAB - print non zero header values and data for non-graphic terminals
SUTAPER - Taper the edge traces of a data panel to zero.	
SUTAUP - forwared and inverse T-X and F-K global slant stacks	
SUTIHALEDMO - TI Hale Dip MoveOut (based on Hale's PhD thesis)	
 SUTIVEL -  SU Transversely Isotropic velocity table builder		
SUTSQ -- time axis time-squared stretch of seismic traces	
SUTTOZ - resample from time to depth					
SUTVBAND - time-variant bandpass filter (sine-squared taper)  
SUTXTAPER - TAPER in (X,T) the edges of a data panel to zero.	
SUUNPACK1 - unpack segy trace data from chars to floats	
SUUNPACK2 - unpack segy trace data from shorts to floats	
SUVCAT -  append one data set to another, with or without an  ", 
SUVEL2DF - compute stacking VELocity semblance for a single time in   
SUVELAN - compute stacking velocity semblance for cdp gathers		     
SUVELAN_NCCS - compute stacking VELocity panel for cdp gathers	     
SUVELAN_NSEL - compute stacking VELocity panel for cdp gathers	     
SUVELAN_UCCS - compute stacking VELocity panel for cdp gathers	     
SUVELAN_USEL - compute stacking velocity panel for cdp gathers	     
SUVIBRO - Generates a Vibroseis sweep (linear, linear-segment,
SUVLENGTH - Adjust variable length traces to common length   	
SUWEIGHT - weight traces by header parameter, such as offset		
SUWELLRF - convert WELL log depth, velocity, density data into a	
SUWIND - window traces by key word					
SUXCOR - correlation with user-supplied filter			
SUXEDIT - examine segy diskfiles and edit headers			
SUZERO -- zero-out (or set constant) data within a time window	
SUZTOT - resample from depth to time					

In CWPROOT/src/su/graphics/psplot:
SUPSCONTOUR - PostScript CONTOUR plot of a segy data set		
SUPSCUBE - PostScript CUBE plot of a segy data set			
SUPSCUBECONTOUR - PostScript CUBE plot of a segy data set		
SUPSGRAPH - PostScript GRAPH plot of a segy data set			
SUPSIMAGE - PostScript IMAGE plot of a segy data set			
SUPSMAX - PostScript of the MAX, min, or absolute max value on each trace
SUPSMOVIE - PostScript MOVIE plot of a segy data set			
SUPSWIGB - PostScript Bit-mapped WIGgle plot of a segy data set	
SUPSWIGP - PostScript Polygon-filled WIGgle plot of a segy data set	

In CWPROOT/src/su/graphics/xplot:
SUXCONTOUR - X CONTOUR plot of Seismic UNIX tracefile via vector plot call
SUXGRAPH - X-windows GRAPH plot of a segy data set			
SUXIMAGE - X-windows IMAGE plot of a segy data set	                
SUXMAX - X-windows graph of the MAX, min, or absolute max value on	
SUXMOVIE - X MOVIE plot of a 2D or 3D segy data set 			
SUXPICKER - X-windows  WIGgle plot PICKER of a segy data set		
SUXWIGB - X-windows Bit-mapped WIGgle plot of a segy data set		

In CWPROOT/src/tri/main:
GBBEAM - Gaussian beam synthetic seismograms for a sloth model 	
NORMRAY - dynamic ray tracing for normal incidence rays in a sloth model
TRI2UNI - convert a TRIangulated model to UNIformly sampled model	
TRIMODEL - make a triangulated sloth (1/velocity^2) model                  		
TRIRAY - dynamic RAY tracing for a TRIangulated sloth model		
TRISEIS - Gaussian beam synthetic seismograms for a sloth model	
UNI2TRI - convert UNIformly sampled model to a TRIangulated model	

In CWPROOT/src/xtri:
SXPLOT - X Window plot a triangulated sloth function s(x1,x2)		

In CWPROOT/src/tri/graphics/psplot:
SPSPLOT - plot a triangulated sloth function s(x,z) via PostScript	

In CWPROOT/src/comp/dct/main:
DCTCOMP - Compression by Discrete Cosine Transform			
DCTUNCOMP - Discrete Cosine Transform Uncompression 			
ENTROPY - compute the ENTROPY of a signal			
WPTCOMP - Compression by Wavelet Packet Compression 			
WPTUNCOMP - Uncompress  WPT compressed data				
WTCOMP - Compression by Wavelet Transform				
WTUNCOMP - UNCOMPression of WT compressed data			

In CWPROOT/src/comp/dwpt/1d/main:
WPC1COMP2 --- COMPress a 2D seismic section trace-by-trace using 	
WPC1UNCOMP2 --- UNCOMPRESS a 2D seismic section, which has been	

In CWPROOT/src/comp/dwpt/2d/main:
WPCCOMPRESS --- COMPRESS a 2D section using Wavelet Packets		
WPCUNCOMPRESS --- UNCOMPRESS a 2D section 				

Shells: 

In CWPROOT/src/cwp/shell:
# ARGV - give examples of dereferencing char **argv
# COPYRIGHT - insert CSM COPYRIGHT lines at top of files in working directory
# CPALL , RCPALL - for local and remote directory tree/file transfer
# CWPFIND - look for files with patterns in CWPROOT/src/cwp/lib
# DIRTREE - show DIRectory TREE
# FILETYPE - list all files of given type
# Grep  - recursively call egrep in pwd
# NEWCASE - Changes the case of all the filenames in a directory, dir
# OVERWRITE - copy stdin to stdout after EOF
# PRECEDENCE - give table of C precedences from Kernighan and Ritchie
# REPLACE - REPLACE string1 with string2  in files
# THIS_YEAR - print the current year
# TIME_NOW - prints time in ZULU format with no spaces 
# TODAYS_DATE - prints today's date in ZULU format with no spaces 
# USERNAMES - get list of all login names
# VARLIST - list variables used in a Fortran program
# WEEKDAY - prints today's WEEKDAY designation
# ZAP - kill processes by name

In CWPROOT/src/par/shell:
# GENDOCS - generate complete list of selfdocs in latex form
# STRIPTOTXT -  put files from $CWPROOT/src/doc/Stripped into a new
# UPDATEDOCALL - put self-docs in ../doc/Stripped
# UPDATEDOC - put self-docs in ../doc/Stripped and ../doc/Headers
# UPDATEHEAD - update ../doc/Headers/Headers.all

In CWPROOT/src/psplot/shell:
# MERGE2 - put 2 standard size PostScript figures on one page
# MERGE4 - put 4 standard size PostScript plots on one page

In CWPROOT/src/su/shell:
# LOOKPAR - show getpar lines in SU code with defines evaluated
# MAXDIFF - find absolute maximum difference in two segy data sets