sysserial.c

ROM型的vxworksBSP包 编译测试通过

/* sysSerial.c - ARM Integrator board serial device initialization */

/* Copyright 1999-2000 ARM Limited */
/* Copyright 1999-2000 Wind River Systems, Inc. */
#include "copyright_wrs.h"

/*
modification history
--------------------
01c,21feb00,jpd  renamed primecell... symbols to primeCell...
01b,26jan00,jpd  minor layout/style changes.
01a,10nov99,ajb  copied from pid7t sysSerial.c.
*/

/*
DESCRIPTION
This file contains the board-specific routines for serial channel
initialization of the ARM Integrator development board.

SEE ALSO:
.I "ARM Integrator AP User Guide (ARM DUI 0098)."
.I "UART (PL010) Technical Reference Manual (ARM DDI 0139)."
*/


#include "vxWorks.h"
#include "iv.h"
#include "intLib.h"
#include "config.h"
#include "sysLib.h"
#include "primeCellSio.h"

/* device initialization structure */

typedef struct
{
    UINT	vector;
    UINT32 *	baseAdrs;
    UINT	intLevel;
} SYS_AMBA_CHAN_PARAS;


/* Local data structures */

LOCAL SYS_AMBA_CHAN_PARAS devParas[] =
{
    {INT_VEC_UART_0, (UINT32 *)UART_0_BASE_ADR, INT_LVL_UART_0},
    {INT_VEC_UART_1, (UINT32 *)UART_1_BASE_ADR, INT_LVL_UART_1}
};

LOCAL AMBA_CHAN ambaChan[N_AMBA_UART_CHANNELS];

/*
 * Array of pointers to all serial channels configured in system.
 * See sioChanGet(). It is this array that maps channel pointers
 * to standard device names.  The first entry will become "/tyCo/0",
 * the second "/tyCo/1", and so forth.
 */

SIO_CHAN * sysSioChans [] =
{
   &ambaChan[0].sio, /* /tyCo/0 */
   &ambaChan[1].sio, /* /tyCo/1 */
};


/* forward declarations */

/******************************************************************************
*
* sysSerialHwInit - initialize the BSP serial devices to a quiescent state
*
* This routine initializes the BSP serial device descriptors and puts the
* devices in a quiesent state.  It is called from sysHwInit() with
* interrupts locked.
*
* RETURNS: N/A
*
* SEE ALSO: sysHwInit()
*/

void sysSerialHwInit (void)
{
    int i;
    
    for (i = 0; i < N_AMBA_UART_CHANNELS; i++)
    {
	ambaChan[i].regs = devParas[i].baseAdrs;
	ambaChan[i].baudRate = CONSOLE_BAUD_RATE;
/*	ambaChan[i].xtal = UART_XTAL_FREQ;*/

	ambaChan[i].levelRx = devParas[i].intLevel;
	ambaChan[i].levelTx = devParas[i].intLevel;

	/*
	 * Initialise driver functions, getTxChar, putRcvChar and channelMode
	 * and initialise UART
	 */
 
	primeCellSioDevInit(&ambaChan[i]);
     }
}

/******************************************************************************
*
* sysSerialHwInit2 - connect BSP serial device interrupts
*
* This routine connects the BSP serial device interrupts.  It is called from
* sysHwInit2().  Serial device interrupts could not be connected in
* sysSerialHwInit() because the kernel memory allocator was not initialized
* at that point, and intConnect() may call malloc().
*
* RETURNS: N/A
*
* SEE ALSO: sysHwInit2()
*/

void sysSerialHwInit2 (void)
{
    int i;

    for (i = 0; i < N_AMBA_UART_CHANNELS; i++)
    {
	/*
	 * Connect and enable the interrupt.
	 * We would like to check the return value from this and log a message
	 * if it failed. However, logLib has not been initialised yet, so we
	 * cannot log a message, so there's little point in checking it.
	 */

	(void) intConnect (INUM_TO_IVEC(devParas[i].vector),
			   primeCellSioInt, (int)&ambaChan[i] );
			   
	intEnable (devParas[i].intLevel);
    }
}

/******************************************************************************
*
* sysSerialChanGet - get the SIO_CHAN device associated with a serial channel
*
* This routine returns a pointer to the SIO_CHAN device associated with
* a specified serial channel.  It is called by usrRoot() to obtain
* pointers when creating the system serial devices '/tyCo/x'.  It is also
* used by the WDB agent to locate its serial channel.
*
* RETURNS: A pointer to the SIO_CHAN structure for the channel, or ERROR
* if the channel is invalid.
*/

SIO_CHAN * sysSerialChanGet(int channel/* serial channel */)
{
    if (channel < 0 || channel >= (int)(NELEMENTS(sysSioChans)))
    {
    	return (SIO_CHAN *)ERROR;
    }
    
    return sysSioChans[channel];
}

/******************************************************************************
*
* sysSerialReset - reset the sio devices to a quiet state
*
* Reset all devices to prevent them from generating interrupts.
*
* This is called from sysToMonitor to shutdown the system gracefully before
* transferring to the boot ROMs.
*
* RETURNS: N/A.
*/

void sysSerialReset (void)
{
    int i;

    for (i = 0; i < N_AMBA_UART_CHANNELS; i++)
    {
	/* disable serial interrupts */

	intDisable (devParas[i].intLevel);
    }
}