integrator.h.bak

2410 BSP vxworks xia下

#define rUCON1      (*(volatile unsigned *)0x50004004) /*UART 1 Control*/
#define rUFCON1     (*(volatile unsigned *)0x50004008) /*UART 1 FIFO control*/
#define rUMCON1     (*(volatile unsigned *)0x5000400c) /*UART 1 Modem control*/
#define rUTRSTAT1   (*(volatile unsigned *)0x50004010) /*UART 1 Tx/Rx status*/
#define rUERSTAT1   (*(volatile unsigned *)0x50004014) /*UART 1 Rx error status*/
#define rUFSTAT1    (*(volatile unsigned *)0x50004018) /*UART 1 FIFO status*/
#define rUMSTAT1    (*(volatile unsigned *)0x5000401c) /*UART 1 Modem status*/
#define rUBRDIV1    (*(volatile unsigned *)0x50004028) /*UART 1 Baud rate divisor*/

#define rULCON2     (*(volatile unsigned *)0x50008000) /*UART 2 Line control*/
#define rUCON2      (*(volatile unsigned *)0x50008004) /*UART 2 Control*/
#define rUFCON2     (*(volatile unsigned *)0x50008008) /*UART 2 FIFO control*/
#define rUMCON2     (*(volatile unsigned *)0x5000800c) /*UART 2 Modem control*/
#define rUTRSTAT2   (*(volatile unsigned *)0x50008010) /*UART 2 Tx/Rx status*/
#define rUERSTAT2   (*(volatile unsigned *)0x50008014) /*UART 2 Rx error status*/
#define rUFSTAT2    (*(volatile unsigned *)0x50008018) /*UART 2 FIFO status*/
#define rUMSTAT2    (*(volatile unsigned *)0x5000801c) /*UART 2 Modem status*/
#define rUBRDIV2    (*(volatile unsigned *)0x50008028) /*UART 2 Baud rate divisor*/


#define rUTXH0 (*(volatile unsigned char *)0x50000020) /*UART 0 Transmission Hold*/
#define rURXH0 (*(volatile unsigned char *)0x50000024) /*UART 0 Receive buffer*/
#define rUTXH1 (*(volatile unsigned char *)0x50004020) /*UART 1 Transmission Hold*/
#define rURXH1 (*(volatile unsigned char *)0x50004024) /*UART 1 Receive buffer*/
#define rUTXH2 (*(volatile unsigned char *)0x50008020) /*UART 2 Transmission Hold*/
#define rURXH2 (*(volatile unsigned char *)0x50008024) /*UART 2 Receive buffer*/

#define WrUTXH0(ch) (*(volatile unsigned char *)0x50000020)=(unsigned char)(ch)
#define RdURXH0()   (*(volatile unsigned char *)0x50000024)
#define WrUTXH1(ch) (*(volatile unsigned char *)0x50004020)=(unsigned char)(ch)
#define RdURXH1()   (*(volatile unsigned char *)0x50004024)
#define WrUTXH2(ch) (*(volatile unsigned char *)0x50008020)=(unsigned char)(ch)
#define RdURXH2()   (*(volatile unsigned char *)0x50008024)

#define UTXH0       (0x50000020)    /*Byte_access address by DMA*/
#define URXH0       (0x50000024)
#define UTXH1       (0x50004020)
#define URXH1       (0x50004024)
#define UTXH2       (0x50008020)
#define URXH2       (0x50008024)



/* PWM TIMER*/
#define rTCFG0  (*(volatile unsigned *)0x51000000) /*Timer 0 configuration*/
#define rTCFG1  (*(volatile unsigned *)0x51000004) /*Timer 1 configuration*/
#define rTCON   (*(volatile unsigned *)0x51000008) /*Timer control*/
#define rTCNTB0 (*(volatile unsigned *)0x5100000c) /*Timer count buffer 0*/
#define rTCMPB0 (*(volatile unsigned *)0x51000010) /*Timer compare buffer 0*/
#define rTCNTO0 (*(volatile unsigned *)0x51000014) /*Timer count observation 0*/
#define rTCNTB1 (*(volatile unsigned *)0x51000018) /*Timer count buffer 1*/
#define rTCMPB1 (*(volatile unsigned *)0x5100001c) /*Timer compare buffer 1*/
#define rTCNTO1 (*(volatile unsigned *)0x51000020) /*Timer count observation 1*/
#define rTCNTB2 (*(volatile unsigned *)0x51000024) /*Timer count buffer 2*/
#define rTCMPB2 (*(volatile unsigned *)0x51000028) /*Timer compare buffer 2*/
#define rTCNTO2 (*(volatile unsigned *)0x5100002c) /*Timer count observation 2*/
#define rTCNTB3 (*(volatile unsigned *)0x51000030) /*Timer count buffer 3*/
#define rTCMPB3 (*(volatile unsigned *)0x51000034) /*Timer compare buffer 3*/
#define rTCNTO3 (*(volatile unsigned *)0x51000038) /*Timer count observation 3*/
#define rTCNTB4 (*(volatile unsigned *)0x5100003c) /*Timer count buffer 4*/
#define rTCNTO4 (*(volatile unsigned *)0x51000040) /*Timer count observation 4*/


/* USB DEVICE*/
#define rFUNC_ADDR_REG     (*(volatile unsigned char *)0x52000140) /*Function address*/
#define rPWR_REG           (*(volatile unsigned char *)0x52000144) /*Power management*/
#define rEP_INT_REG        (*(volatile unsigned char *)0x52000148) /*EP Interrupt pending and clear*/
#define rUSB_INT_REG       (*(volatile unsigned char *)0x52000158) /*USB Interrupt pending and clear*/
#define rEP_INT_EN_REG     (*(volatile unsigned char *)0x5200015c) /*Interrupt enable*/
#define rUSB_INT_EN_REG    (*(volatile unsigned char *)0x5200016c)
#define rFRAME_NUM1_REG    (*(volatile unsigned char *)0x52000170) /*Frame number lower byte*/
#define rFRAME_NUM2_REG    (*(volatile unsigned char *)0x52000174) /*Frame number higher byte*/
#define rINDEX_REG         (*(volatile unsigned char *)0x52000178) /*Register index*/
#define rMAXP_REG          (*(volatile unsigned char *)0x52000180) /*Endpoint max packet*/
#define rEP0_CSR           (*(volatile unsigned char *)0x52000184) /*Endpoint 0 status*/
#define rIN_CSR1_REG       (*(volatile unsigned char *)0x52000184) /*In endpoint control status*/
#define rIN_CSR2_REG       (*(volatile unsigned char *)0x52000188)
#define rOUT_CSR1_REG      (*(volatile unsigned char *)0x52000190) /*Out endpoint control status*/
#define rOUT_CSR2_REG      (*(volatile unsigned char *)0x52000194)
#define rOUT_FIFO_CNT1_REG (*(volatile unsigned char *)0x52000198) /*Endpoint out write count*/
#define rOUT_FIFO_CNT2_REG (*(volatile unsigned char *)0x5200019c)
#define rEP0_FIFO          (*(volatile unsigned char *)0x520001c0) /*Endpoint 0 FIFO*/
#define rEP1_FIFO          (*(volatile unsigned char *)0x520001c4) /*Endpoint 1 FIFO*/
#define rEP2_FIFO          (*(volatile unsigned char *)0x520001c8) /*Endpoint 2 FIFO*/
#define rEP3_FIFO          (*(volatile unsigned char *)0x520001cc) /*Endpoint 3 FIFO*/
#define rEP4_FIFO          (*(volatile unsigned char *)0x520001d0) /*Endpoint 4 FIFO*/
#define rEP1_DMA_CON       (*(volatile unsigned char *)0x52000200) /*EP1 DMA interface control*/
#define rEP1_DMA_UNIT      (*(volatile unsigned char *)0x52000204) /*EP1 DMA Tx unit counter*/
#define rEP1_DMA_FIFO      (*(volatile unsigned char *)0x52000208) /*EP1 DMA Tx FIFO counter*/
#define rEP1_DMA_TTC_L     (*(volatile unsigned char *)0x5200020c) /*EP1 DMA total Tx counter*/
#define rEP1_DMA_TTC_M     (*(volatile unsigned char *)0x52000210)
#define rEP1_DMA_TTC_H     (*(volatile unsigned char *)0x52000214)
#define rEP2_DMA_CON       (*(volatile unsigned char *)0x52000218) /*EP2 DMA interface control*/
#define rEP2_DMA_UNIT      (*(volatile unsigned char *)0x5200021c) /*EP2 DMA Tx unit counter*/
#define rEP2_DMA_FIFO      (*(volatile unsigned char *)0x52000220) /*EP2 DMA Tx FIFO counter*/
#define rEP2_DMA_TTC_L     (*(volatile unsigned char *)0x52000224) /*EP2 DMA total Tx counter*/
#define rEP2_DMA_TTC_M     (*(volatile unsigned char *)0x52000228)
#define rEP2_DMA_TTC_H     (*(volatile unsigned char *)0x5200022c)
#define rEP3_DMA_CON       (*(volatile unsigned char *)0x52000240) /*EP3 DMA interface control*/
#define rEP3_DMA_UNIT      (*(volatile unsigned char *)0x52000244) /*EP3 DMA Tx unit counter*/
#define rEP3_DMA_FIFO      (*(volatile unsigned char *)0x52000248) /*EP3 DMA Tx FIFO counter*/
#define rEP3_DMA_TTC_L     (*(volatile unsigned char *)0x5200024c) /*EP3 DMA total Tx counter*/
#define rEP3_DMA_TTC_M     (*(volatile unsigned char *)0x52000250)
#define rEP3_DMA_TTC_H     (*(volatile unsigned char *)0x52000254)
#define rEP4_DMA_CON       (*(volatile unsigned char *)0x52000258) /*EP4 DMA interface control*/
#define rEP4_DMA_UNIT      (*(volatile unsigned char *)0x5200025c) /*EP4 DMA Tx unit counter*/
#define rEP4_DMA_FIFO      (*(volatile unsigned char *)0x52000260) /*EP4 DMA Tx FIFO counter*/
#define rEP4_DMA_TTC_L     (*(volatile unsigned char *)0x52000264) /*EP4 DMA total Tx counter*/
#define rEP4_DMA_TTC_M     (*(volatile unsigned char *)0x52000268)
#define rEP4_DMA_TTC_H     (*(volatile unsigned char *)0x5200026c)



/* WATCH DOG TIMER*/
#define rWTCON   (*(volatile unsigned *)0x53000000) /*Watch-dog timer mode*/
#define rWTDAT   (*(volatile unsigned *)0x53000004) /*Watch-dog timer data*/
#define rWTCNT   (*(volatile unsigned *)0x53000008) /*Eatch-dog timer count*/


/* IIC*/
#define rIICCON  (*(volatile unsigned *)0x54000000) /*IIC control*/
#define rIICSTAT (*(volatile unsigned *)0x54000004) /*IIC status*/
#define rIICADD  (*(volatile unsigned *)0x54000008) /*IIC address*/
#define rIICDS   (*(volatile unsigned *)0x5400000c) /*IIC data shift*/


/* IIS*/
#define rIISCON  (*(volatile unsigned *)0x55000000) /*IIS Control*/
#define rIISMOD  (*(volatile unsigned *)0x55000004) /*IIS Mode*/
#define rIISPSR  (*(volatile unsigned *)0x55000008) /*IIS Prescaler*/
#define rIISFCON (*(volatile unsigned *)0x5500000c) /*IIS FIFO control*/

#define IISFIFO  ((volatile unsigned short *)0x55000010) /*IIS FIFO entry*/



/* I/O PORT */
#define rGPACON    (*(volatile unsigned *)0x56000000) /*Port A control*/
#define rGPADAT    (*(volatile unsigned *)0x56000004) /*Port A data*/
                        
#define rGPBCON    (*(volatile unsigned *)0x56000010) /*Port B control*/
#define rGPBDAT    (*(volatile unsigned *)0x56000014) /*Port B data*/
#define rGPBUP     (*(volatile unsigned *)0x56000018) /*Pull-up control B*/
                        
#define rGPCCON    (*(volatile unsigned *)0x56000020) /*Port C control*/
#define rGPCDAT    (*(volatile unsigned *)0x56000024) /*Port C data*/
#define rGPCUP     (*(volatile unsigned *)0x56000028) /*Pull-up control C*/
                        
#define rGPDCON    (*(volatile unsigned *)0x56000030) /*Port D control*/
#define rGPDDAT    (*(volatile unsigned *)0x56000034) /*Port D data*/
#define rGPDUP     (*(volatile unsigned *)0x56000038) /*Pull-up control D*/
                        
#define rGPECON    (*(volatile unsigned *)0x56000040) /*Port E control*/
#define rGPEDAT    (*(volatile unsigned *)0x56000044) /*Port E data*/
#define rGPEUP     (*(volatile unsigned *)0x56000048) /*Pull-up control E*/
                        
#define rGPFCON    (*(volatile unsigned *)0x56000050) /*Port F control*/
#define rGPFDAT    (*(volatile unsigned *)0x56000054) /*Port F data*/
#define rGPFUP     (*(volatile unsigned *)0x56000058) /*Pull-up control F*/
                        
#define rGPGCON    (*(volatile unsigned *)0x56000060) /*Port G control*/
#define rGPGDAT    (*(volatile unsigned *)0x56000064) /*Port G data*/
#define rGPGUP     (*(volatile unsigned *)0x56000068) /*Pull-up control G*/
                        
#define rGPHCON    (*(volatile unsigned *)0x56000070) /*Port H control*/
#define rGPHDAT    (*(volatile unsigned *)0x56000074) /*Port H data*/
#define rGPHUP     (*(volatile unsigned *)0x56000078) /*Pull-up control H*/
                        
#define rMISCCR    (*(volatile unsigned *)0x56000080) /*Miscellaneous control*/
#define rDCLKCON   (*(volatile unsigned *)0x56000084) /*DCLK0/1 control*/
#define rEXTINT0   (*(volatile unsigned *)0x56000088) /*External interrupt control register 0*/
#define rEXTINT1   (*(volatile unsigned *)0x5600008c) /*External interrupt control register 1*/
#define rEXTINT2   (*(volatile unsigned *)0x56000090) /*External interrupt control register 2*/
#define rEINTFLT0  (*(volatile unsigned *)0x56000094) /*Reserved*/
#define rEINTFLT1  (*(volatile unsigned *)0x56000098) /*Reserved*/
#define rEINTFLT2  (*(volatile unsigned *)0x5600009c) /*External interrupt filter control register 2*/
#define rEINTFLT3  (*(volatile unsigned *)0x560000a0) /*External interrupt filter control register 3*/
#define rEINTMASK  (*(volatile unsigned *)0x560000a4) /*External interrupt mask*/
#define rEINTPEND  (*(volatile unsigned *)0x560000a8) /*External interrupt pending*/
#define rGSTATUS0  (*(volatile unsigned *)0x560000ac) /*External pin status*/
#define rGSTATUS1  (*(volatile unsigned *)0x560000b0) /*Chip ID(0x32410000)*/
#define rGSTATUS2  (*(volatile unsigned *)0x560000b4) /*Reset type*/
#define rGSTATUS3  (*(volatile unsigned *)0x560000b8) /*Saved data0(32-bit) before entering POWER_OFF mode */
#define rGSTATUS4  (*(volatile unsigned *)0x560000bc) /*Saved data0(32-bit) before entering POWER_OFF mode */


/* RTC*/

#define rRTCCON    (*(volatile unsigned char *)0x57000040) /*RTC control*/
#define rTICNT     (*(volatile unsigned char *)0x57000044) /*Tick time count*/
#define rRTCALM    (*(volatile unsigned char *)0x57000050) /*RTC alarm control*/
#define rALMSEC    (*(volatile unsigned char *)0x57000054) /*Alarm second*/
#define rALMMIN    (*(volatile unsigned char *)0x57000058) /*Alarm minute*/
#define rALMHOUR   (*(volatile unsigned char *)0x5700005c) /*Alarm Hour*/
#define rALMDATE   (*(volatile unsigned char *)0x57000060) /*Alarm day      <-- May 06, 2002 SOP*/
#define rALMMON    (*(volatile unsigned char *)0x57000064) /*Alarm month*/
#define rALMYEAR   (*(volatile unsigned char *)0x57000068) /*Alarm year*/
#define rRTCRST    (*(volatile unsigned char *)0x5700006c) /*RTC round reset*/
#define rBCDSEC    (*(volatile unsigned char *)0x57000070) /*BCD second*/
#define rBCDMIN    (*(volatile unsigned char *)0x57000074) /*BCD minute*/
#define rBCDHOUR   (*(volatile unsigned char *)0x57000078) /*BCD hour*/
#define rBCDDATE   (*(volatile unsigned char *)0x5700007c) /*BCD day        <-- May 06, 2002 SOP*/
#define rBCDDAY    (*(volatile unsigned char *)0x57000080) /*BCD date       <-- May 06, 2002 SOP*/
#define rBCDMON    (*(volatile unsigned char *)0x57000084) /*BCD month*/
#define rBCDYEAR   (*(volatile unsigned char *)0x57000088) /*BCD year*/



/* ADC*/
#define rADCCON    (*(volatile unsigned *)0x58000000) /*ADC control*/
#define rADCTSC    (*(volatile unsigned *)0x58000004) /*ADC touch screen control*/
#define rADCDLY    (*(volatile unsigned *)0x58000008) /*ADC start or Interval Delay*/
#define rADCDAT0   (*(volatile unsigned *)0x5800000c) /*ADC conversion data 0*/
#define rADCDAT1   (*(volatile unsigned *)0x58000010) /*ADC conversion data 1  */                 
                        
/* SPI          */
#define rSPCON0    (*(volatile unsigned *)0x59000000) /*SPI0 control*/
#define rSPSTA0    (*(volatile unsigned *)0x59000004) /*SPI0 status*/
#define rSPPIN0    (*(volatile unsigned *)0x59000008) /*SPI0 pin control*/
#define rSPPRE0    (*(volatile unsigned *)0x5900000c) /*SPI0 baud rate prescaler*/
#define rSPTDAT0   (*(volatile unsigned *)0x59000010) /*SPI0 Tx data*/
#define rSPRDAT0   (*(volatile unsigned *)0x59000014) /*SPI0 Rx data*/

#define rSPCON1    (*(volatile unsigned *)0x59000020) /*SPI1 control*/
#define rSPSTA1    (*(volatile unsigned *)0x59000024) /*SPI1 status*/
#define rSPPIN1    (*(volatile unsigned *)0x59000028) /*SPI1 pin control*/
#define rSPPRE1    (*(volatile unsigned *)0x5900002c) /*SPI1 baud rate prescaler*/
#define rSPTDAT1   (*(volatile unsigned *)0x59000030) /*SPI1 Tx data*/
#define rSPRDAT1   (*(volatile unsigned *)0x59000034) /*SPI1 Rx data*/


/* SD Interface*/
#define rSDICON     (*(volatile unsigned *)0x5a000000) /*SDI control*/
#define rSDIPRE     (*(volatile unsigned *)0x5a000004) /*SDI baud rate prescaler*/
#define rSDICARG    (*(volatile unsigned *)0x5a000008) /*SDI command argument*/
#define rSDICCON    (*(volatile unsigned *)0x5a00000c) /*SDI command control*/
#define rSDICSTA    (*(volatile unsigned *)0x5a000010) /*SDI command status*/
#define rSDIRSP0    (*(volatile unsigned *)0x5a000014) /*SDI response 0*/
#define rSDIRSP1    (*(volatile unsigned *)0x5a000018) /*SDI response 1*/
#define rSDIRSP2    (*(volatile unsigned *)0x5a00001c) /*SDI response 2*/
#define rSDIRSP3    (*(volatile unsigned *)0x5a000020) /*SDI response 3*/
#define rSDIDTIMER  (*(volatile unsigned *)0x5a000024) /*SDI data/busy timer*/
#define rSDIBSIZE   (*(volatile unsigned *)0x5a000028) /*SDI block size*/
#define rSDIDCON    (*(volatile unsigned *)0x5a00002c) /*SDI data control*/
#define rSDIDCNT    (*(volatile unsigned *)0x5a000030) /*SDI data remain counter*/
#define rSDIDSTA    (*(volatile unsigned *)0x5a000034) /*SDI data status*/
#define rSDIFSTA    (*(volatile unsigned *)0x5a000038) /*SDI FIFO status*/
#define rSDIIMSK    (*(volatile unsigned *)0x5a000040) /*SDI interrupt mask*/

             

/* ISR*/
#define pISR_RESET     (*(unsigned *)(_ISR_STARTADDRESS+0x0))
#define pISR_UNDEF     (*(unsigned *)(_ISR_STARTADDRESS+0x4))
#define pISR_SWI       (*(unsigned *)(_ISR_STARTADDRESS+0x8))
#define pISR_PABORT    (*(unsigned *)(_ISR_STARTADDRESS+0xc))
#define pISR_DABORT    (*(unsigned *)(_ISR_STARTADDRESS+0x10))
#define pISR_RESERVED  (*(unsigned *)(_ISR_STARTADDRESS+0x14))
#define pISR_IRQ       (*(unsigned *)(_ISR_STARTADDRESS+0x18))
#define pISR_FIQ       (*(unsigned *)(_ISR_STARTADDRESS+0x1c))

#define pISR_EINT0     (*(unsigned *)(_ISR_STARTADDRESS+0x20))
#define pISR_EINT1     (*(unsigned *)(_ISR_STARTADDRESS+0x24))
#define pISR_EINT2     (*(unsigned *)(_ISR_STARTADDRESS+0x28))
#define pISR_EINT3     (*(unsigned *)(_ISR_STARTADDRESS+0x2c))
#define pISR_EINT4_7   (*(unsigned *)(_ISR_STARTADDRESS+0x30))
#define pISR_EINT8_23  (*(unsigned *)(_ISR_STARTADDRESS+0x34))
#define pISR_NOTUSED6  (*(unsigned *)(_ISR_STARTADDRESS+0x38))
#define pISR_BAT_FLT   (*(unsigned *)(_ISR_STARTADDRESS+0x3c))
#define pISR_TICK      (*(unsigned *)(_ISR_STARTADDRESS+0x40))
#define pISR_WDT       (*(unsigned *)(_ISR_STARTADDRESS+0x44))
#define pISR_TIMER0    (*(unsigned *)(_ISR_STARTADDRESS+0x48))
#define pISR_TIMER1    (*(unsigned *)(_ISR_STARTADDRESS+0x4c))
#define pISR_TIMER2    (*(unsigned *)(_ISR_STARTADDRESS+0x50))
#define pISR_TIMER3    (*(unsigned *)(_ISR_STARTADDRESS+0x54))
#define pISR_TIMER4    (*(unsigned *)(_ISR_STARTADDRESS+0x58))
#define pISR_UART2     (*(unsigned *)(_ISR_STARTADDRESS+0x5c))
#define pISR_LCD       (*(unsigned *)(_ISR_STARTADDRESS+0x60))
#define pISR_DMA0      (*(unsigned *)(_ISR_STARTADDRESS+0x64))
#define pISR_DMA1      (*(unsigned *)(_ISR_STARTADDRESS+0x68))