armelf.xr

gcc编译器 arm-2.95.3.tar.gz

/* Script for ld -r: link without relocation */
OUTPUT_FORMAT("elf32-littlearm", "elf32-bigarm",
	      "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
 /* For some reason, the Solaris linker makes bad executables
  if gld -r is used and the intermediate file has sections starting
  at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
  bug.  But for now assigning the zero vmas works.  */
SECTIONS
{
  /* Read-only sections, merged into text segment: */
  .interp       0 : { *(.interp) }
  .hash         0 : { *(.hash) }
  .dynsym       0 : { *(.dynsym) }
  .dynstr       0 : { *(.dynstr) }
  .gnu.version  0 : { *(.gnu.version) }
  .gnu.version_d 0: { *(.gnu.version_d) }
  .gnu.version_r 0: { *(.gnu.version_r) }
  .rel.init     0 : { *(.rel.init) }
  .rela.init    0 : { *(.rela.init) }
  .rel.text     0 : { *(.rel.text) }
  .rela.text    0 : { *(.rela.text) }
  .rel.fini     0 : { *(.rel.fini) }
  .rela.fini    0 : { *(.rela.fini) }
  .rel.rodata   0 : { *(.rel.rodata) }
  .rela.rodata  0 : { *(.rela.rodata) }
  .rel.data     0 : { *(.rel.data) }
  .rela.data    0 : { *(.rela.data) }
  .rel.ctors    0 : { *(.rel.ctors) }
  .rela.ctors   0 : { *(.rela.ctors) }
  .rel.dtors    0 : { *(.rel.dtors) }
  .rela.dtors   0 : { *(.rela.dtors) }
  .rel.got      0 : { *(.rel.got) }
  .rela.got     0 : { *(.rela.got) }
  .rel.sdata    0 : { *(.rel.sdata) }
  .rela.sdata   0 : { *(.rela.sdata) }
  .rel.sbss     0 : { *(.rel.sbss) }
  .rela.sbss    0 : { *(.rela.sbss) }
  .rel.sdata2   0 : { *(.rel.sdata2) }
  .rela.sdata2  0 : { *(.rela.sdata2) }
  .rel.sbss2    0 : { *(.rel.sbss2) }
  .rela.sbss2   0 : { *(.rela.sbss2) }
  .rel.bss      0 : { *(.rel.bss) }
  .rela.bss     0 : { *(.rela.bss) }
  .rel.plt      0 : { *(.rel.plt) }
  .rela.plt     0 : { *(.rela.plt) }
  .init         0 :
  {
    KEEP (*(.init))
  } =0
  .plt          0 : { *(.plt) }
  .text         0 :
  {
    *(.text .stub)
    /* .gnu.warning sections are handled specially by elf32.em.  */
    *(.gnu.warning)
  } =0
  .fini         0 :
  {
    KEEP (*(.fini))
  } =0
  .rodata       0 : { *(.rodata) }
  .rodata1      0 : { *(.rodata1) }
  .sdata2       0 : { *(.sdata2) }
  .sbss2        0 : { *(.sbss2) }
  .eh_frame_hdr : { *(.eh_frame_hdr) }
  /* Adjust the address for the data segment.  We want to adjust up to
     the same address within the page on the next page up.  */
  /* Ensure the __preinit_array_start label is properly aligned.  We
     could instead move the label definition inside the section, but
     the linker would then create the section even if it turns out to
     be empty, which isn't pretty.  */
  .preinit_array   0 : { *(.preinit_array) }
  .init_array   0 : { *(.init_array) }
  .fini_array   0 : { *(.fini_array) }
  .data         0 :
  {
    *(.data)
  }
  .data1        0 : { *(.data1) }
  .eh_frame     0 : { KEEP (*(.eh_frame)) }
  .gcc_except_table 0 : { *(.gcc_except_table) }
  .dynamic      0 : { *(.dynamic) }
  .jcr          0 : { KEEP (*(.jcr)) }
  .got          0 : { *(.got.plt) *(.got) }
  /* We want the small data sections together, so single-instruction offsets
     can access them all, and initialized data all before uninitialized, so
     we can shorten the on-disk segment size.  */
  .sdata        0 :
  {
    *(.sdata)
  }
  .sbss         0 :
  {
    *(.dynsbss)
    *(.sbss)
    *(.scommon)
  }
  .bss          0 :
  {
   *(.dynbss)
   *(.bss)
   *(COMMON)
   /* Align here to ensure that the .bss section occupies space up to
      _end.  Align after .bss to ensure correct alignment even if the
      .bss section disappears because there are no input sections.  */
  }
  /* Stabs debugging sections.  */
  .stab          0 : { *(.stab) }
  .stabstr       0 : { *(.stabstr) }
  .stab.excl     0 : { *(.stab.excl) }
  .stab.exclstr  0 : { *(.stab.exclstr) }
  .stab.index    0 : { *(.stab.index) }
  .stab.indexstr 0 : { *(.stab.indexstr) }
  .comment       0 : { *(.comment) }
  /* DWARF debug sections.
     Symbols in the DWARF debugging sections are relative to the beginning
     of the section so we begin them at 0.  */
  /* DWARF 1 */
  .debug          0 : { *(.debug) }
  .line           0 : { *(.line) }
  /* GNU DWARF 1 extensions */
  .debug_srcinfo  0 : { *(.debug_srcinfo) }
  .debug_sfnames  0 : { *(.debug_sfnames) }
  /* DWARF 1.1 and DWARF 2 */
  .debug_aranges  0 : { *(.debug_aranges) }
  .debug_pubnames 0 : { *(.debug_pubnames) }
  /* DWARF 2 */
  .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
  .debug_abbrev   0 : { *(.debug_abbrev) }
  .debug_line     0 : { *(.debug_line) }
  .debug_frame    0 : { *(.debug_frame) }
  .debug_str      0 : { *(.debug_str) }
  .debug_loc      0 : { *(.debug_loc) }
  .debug_macinfo  0 : { *(.debug_macinfo) }
  /* SGI/MIPS DWARF 2 extensions */
  .debug_weaknames 0 : { *(.debug_weaknames) }
  .debug_funcnames 0 : { *(.debug_funcnames) }
  .debug_typenames 0 : { *(.debug_typenames) }
  .debug_varnames  0 : { *(.debug_varnames) }
    .stack        0 :
  {
    *(.stack)
  }
}