draft-ietf-idr-bgp4-mibv2-00.txt

BCAST Implementation for NS2

            ::= { bgpPeerEntry 13 }


        bgpPeerConfederationMember OBJECT-TYPE
            SYNTAX      TruthValue
            MAX-ACCESS  read-only
            STATUS      current
            DESCRIPTION
        "This value indicates whether the given peer is in our
         confederation or not."
        REFERENCE
        "RFC 3065 - BGP Confederations"
            ::= { bgpPeerEntry 14 }


        bgpPeerInUpdates OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "The number of BGP UPDATE messages 
        received on this connection.  This object 
        should be initialized to zero (0) when the 
        connection is established."
            ::= { bgpPeerEntry 15 }


        bgpPeerOutUpdates OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "The number of BGP UPDATE messages 
        transmitted on this connection.  This 
        object should be initialized to zero (0)
        when the connection is established."
            ::= { bgpPeerEntry 16 }

Various Authors      Expires July  13, 2002             [Page 14]

Internet Draft              BGP-MIB v2              July 13, 2001


        bgpPeerInTotalMessages OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "The total number of messages received 
        from the remote peer on this connection.
        This object should be initialized to zero
        when the connection is established."
            ::= { bgpPeerEntry 17 }


    bgpPeerOutTotalMessages OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "The total number of messages transmitted to
        the remote peer on this connection.  This 
        object should be initialized to zero when 
        the connection is established."
            ::= { bgpPeerEntry 18 }


        bgpPeerLastError OBJECT-TYPE
            SYNTAX     OCTET STRING (SIZE (2))
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "The last error code and subcode seen by this
        peer on this connection.  If no error has
        occurred, this field is zero.  Otherwise, the
        first byte of this two byte OCTET STRING
        contains the error code, and the second byte
        contains the subcode."
            ::= { bgpPeerEntry 19 }


        bgpPeerFsmEstablishedTransitions OBJECT-TYPE
            SYNTAX     Counter32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "The total number of times the BGP FSM
        transitioned into the established state
        for this peer."
            ::= { bgpPeerEntry 20 }


        
		
		
		
		
		
Various Authors      Expires July  13, 2002             [Page 15]

Internet Draft              BGP-MIB v2              July 13, 2001
		
		bgpPeerFsmEstablishedTime OBJECT-TYPE
            SYNTAX     Gauge32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "This timer indicates how long (in 
        seconds) this peer has been in the 
        Established state or how long
        since this peer was last in the 
        Established state.  It is set to zero when 
        a new peer is configured or the router is 
        booted."
            ::= { bgpPeerEntry 21 }


        bgpPeerConnectRetryInterval OBJECT-TYPE
            SYNTAX     Integer32 (1..65535)
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
        "Time interval in seconds for the 
        ConnectRetry timer.  The suggested value 
        for this timer is 120 seconds."
            ::= { bgpPeerEntry 22 }


        bgpPeerHoldTime OBJECT-TYPE
            SYNTAX     Integer32  ( 0 | 3..65535 )
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "Time interval in seconds for the Hold 
        Timer established with the peer.  The 
        value of this object is calculated by this 
        BGP speaker by using the smaller of the 
        value in bgpPeerHoldTimeConfigured and the 
        Hold Time received in the OPEN message.
        This value must be at lease three seconds 
        if it is not zero (0) in which case the 
        Hold Timer has not been established with the 
        peer, or, the value of 
        bgpPeerHoldTimeConfigured is zero (0)."
            ::= { bgpPeerEntry 23 }


        
		
		
		
		
		
		
		
		
		
		
Various Authors      Expires July  13, 2002             [Page 16]

Internet Draft              BGP-MIB v2              July 13, 2001
		
		bgpPeerKeepAlive OBJECT-TYPE
            SYNTAX     Integer32 ( 0 | 1..21845 )
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "Time interval in seconds for the KeepAlive
        timer established with the peer.  The value of
        this object is calculated by this BGP 
        speaker such that, when compared with 
        bgpPeerHoldTime, it has the same 
        proportion as what
        bgpPeerKeepAliveConfigured has when 
        compared with bgpPeerHoldTimeConfigured.
        If the value of this object is zero (0),
        it indicates that the KeepAlive timer has 
        not been established with the peer, or,
        the value of bgpPeerKeepAliveConfigured is 
        zero (0)."
            ::= { bgpPeerEntry 24 }


        bgpPeerHoldTimeConfigured OBJECT-TYPE
            SYNTAX     Integer32 ( 0 | 3..65535 )
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
        "Time interval in seconds for the Hold Time
        configured for this BGP speaker with this
        peer.  This value is placed in an OPEN 
        message sent to this peer by this BGP 
        speaker, and is compared with the Hold 
        Time field in an OPEN message received 
        from the peer when determining the Hold
        Time (bgpPeerHoldTime) with the peer.
        This value must not be less than three 
        seconds if it is not zero (0) in which 
        case the Hold Time is NOT to be
        established with the peer.  The suggested 
        value for this timer is 90 seconds."
            ::= { bgpPeerEntry 25 }

		bgpPeerKeepAliveConfigured OBJECT-TYPE
            SYNTAX     Integer32 ( 0 | 1..21845 )
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
        "Time interval in seconds for the 
        KeepAlive timer configured for this BGP 
        speaker with this peer.  The value of this 
        object will only determine the
        KEEPALIVE messages' frequency relative to 
        the value specified in 
        bgpPeerHoldTimeConfigured; the actual
        time interval for the KEEPALIVE messages is
        indicated by bgpPeerKeepAlive.  A 
        reasonable maximum value for this timer 
        would be configured to be one 
        
Various Authors      Expires July  13, 2002             [Page 17]

Internet Draft              BGP-MIB v2              July 13, 2001
		
		third of that of 
        bgpPeerHoldTimeConfigured.
        If the value of this object is zero (0),
        no periodical KEEPALIVE messages are sent
        to the peer after the BGP connection has 
        been established.  The suggested value for 
        this timer is 30 seconds."
            ::= { bgpPeerEntry 26 }


        bgpPeerMinASOriginationInterval OBJECT-TYPE
            SYNTAX     Integer32 (1..65535)
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
        "Time interval in seconds for the
        MinASOriginationInterval timer.
        The suggested value for this timer is 15 
        seconds."
            ::= { bgpPeerEntry 27 }


        bgpPeerMinRouteAdvertisementInterval OBJECT-TYPE
            SYNTAX     Integer32 (1..65535)
            MAX-ACCESS read-write
            STATUS     current
            DESCRIPTION
        "Time interval in seconds for the
        MinRouteAdvertisementInterval timer.
        The suggested value for this timer is 30 
        seconds."
            ::= { bgpPeerEntry 28 }


        bgpPeerInUpdateElapsedTime OBJECT-TYPE
            SYNTAX     Gauge32
            MAX-ACCESS read-only
            STATUS     current
            DESCRIPTION
        "Elapsed time in seconds since the last BGP
        UPDATE message was received from the peer.
        Each time bgpPeerInUpdates is incremented,
        the value of this object is set to zero 
        (0)."
            ::= { bgpPeerEntry 29 }


        bgpPeerAuthenticationSent OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The local peer has sent authentication information
             to the remote peer in the BGP Authentication field."
            ::= { bgpPeerEntry 30  }

        
Various Authors      Expires July  13, 2002             [Page 19]

Internet Draft              BGP-MIB v2              July 13, 2001
		
		bgpPeerAuthenticationSentCode OBJECT-TYPE
            SYNTAX  Integer32 (0..255)
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The code of the authentication information sent to
             the remote peer."
            ::= { bgpPeerEntry 31 }
            
        bgpPeerAuthenticationSentValue OBJECT-TYPE
            SYNTAX  OCTET STRING (SIZE (0..255))
        -- jmh length is too much
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The payload of the authentication information received 
            from the remote peer."
            ::= { bgpPeerEntry 32 }
            
        bgpPeerAuthenticationReceived OBJECT-TYPE
            SYNTAX TruthValue
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The local peer has received authentication information
             from the remote peer in the BGP Authentication field."
            ::= { bgpPeerEntry 33 }
            
        bgpPeerAuthenticationReceivedCode OBJECT-TYPE
            SYNTAX  Integer32 (0..255)
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The code of the authentication information received from
             the remote peer."
            ::= { bgpPeerEntry 34  }
            
        bgpPeerAuthenticationReceivedValue OBJECT-TYPE
            SYNTAX  OCTET STRING (SIZE (0..255))
        -- jmh length is too much
            MAX-ACCESS read-write
            STATUS current
            DESCRIPTION
            "The payload of the authentication information received from
            the remote peer."
            ::= { bgpPeerEntry 35 } 

--
-- new counters
--
    bgpPrefixCountersTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF BgpPrefixCountersEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "Additional per-peer, per AFI/SAFI counters for prefixes"
        ::= { bgpPeerData 2 }

Various Authors      Expires July  13, 2002             [Page 20]

Internet Draft              BGP-MIB v2              July 13, 2001

    bgpPrefixCountersEntry OBJECT-TYPE
        SYNTAX     BgpPrefixCountersEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION
        "Entry containing information about a bgp-peer's prefix
        counters."
        INDEX {
        bgpPeerRemoteAddrType,
        bgpPeerRemoteAddr,
        bgpPrefixCountersAfi,
        bgpPrefixCountersSafi
            }
        ::= { bgpPrefixCountersTable 1 }

    BgpPrefixCountersEntry ::= SEQUENCE {
        bgpPrefixCountersAfi
            InetAddressType,
        bgpPrefixCountersSafi
            BgpSafi,
        bgpPrefixCountersPrefixesReceived
            Counter32,
        bgpPrefixCountersPrefixesSent
            Counter32,
        bgpPrefixCountersWithdrawsReceived
            Counter32,
        bgpPrefixCountersWithdrawsSent
            Counter32,
        bgpPrefixCountersInPrefixes
            Gauge32,
        bgpPrefixCountersInPrefixesAccepted
            Gauge32,
        bgpPrefixCountersInPrefixesRejected
            Gauge32,
        bgpPrefixCountersOutPrefixes
            Gauge32
        }

    bgpPrefixCountersAfi OBJECT-TYPE
        SYNTAX     InetAddressType
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
        "The AFI index of the per-peer, per prefix counters"
        ::= { bgpPrefixCountersEntry 1 }

    bgpPrefixCountersSafi OBJECT-TYPE
        SYNTAX     BgpSafi
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION
        "The SAFI index of the per-peer, per prefix counters"
        ::= { bgpPrefixCountersEntry 2 }