📄 ad1.c
字号:
/** ###################################################################
** THIS BEAN MODULE IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
** Filename : AD1.C
** Project : dy
** Processor : MC9S08QD4CSC
** Beantype : ADC
** Version : Bean 01.404, Driver 01.16, CPU db: 2.87.049
** Compiler : CodeWarrior HCS08 C Compiler
** Date/Time : 2008-3-13, 10:23
** Abstract :
** This device "ADC" implements an A/D converter,
** its control methods and interrupt/event handling procedure.
** Settings :
** AD control register : ADCSC1 [$0010]
** AD control register : ADCCFG [$0016]
** AD control register : ADCR [$0012]
** AD control register : ADCRL [$0013]
** AD control register : ADCCV [$0014]
** AD control register : ADCCVL [$0015]
** AD control register : ADCSC2 [$0011]
** AD control register : APCTL1 [$0017]
** AD result register : ADCres [$0012]
** Interrupt name : Vadc1
** Priority : undef
** User handling procedure : AD1_OnEnd
** Number of conversions : 1
** AD resolution : 8-bit
**
** Input pins
**
** Port name : PTA
** Bit number (in port) : 3
** Bit mask of the port : $0008
** Port data register : PTAD [$0000]
** Port control register : PTADD [$0001]
** Port function register : KBIPE [$000D]
**
** Initialization:
** Conversion : Enabled
** Event : Enabled
** High speed mode
** Prescaler : divide-by-8
** Contents :
** Measure - byte AD1_Measure(bool WaitForResult);
** GetValue8 - byte AD1_GetValue8(byte *Values);
** GetValue16 - byte AD1_GetValue16(word *Values);
**
** (c) Copyright UNIS, spol. s r.o. 1997-2006
** UNIS, spol. s r.o.
** Jundrovska 33
** 624 00 Brno
** Czech Republic
** http : www.processorexpert.com
** mail : info@processorexpert.com
** ###################################################################*/
/* MODULE AD1. */
#include "Events.h"
#include "AD1.h"
#pragma MESSAGE DISABLE C5703 /* Disable warning C5703 "Parameter is not referenced" */
#define STOP 0 /* STOP state */
#define MEASURE 1 /* MESURE state */
#define CONTINUOUS 2 /* CONTINUOS state */
#define SINGLE 3 /* SINGLE state */
static const byte Channels = 0x43; /* Content for the device control register */
static bool OutFlg; /* Measurement finish flag */
static byte ModeFlg; /* Current state of device */
byte AD1_OutV; /* Sum of measured values */
/*
** ===================================================================
** Method : AD1_Interrupt (bean ADC)
**
** Description :
** The method services the interrupt of the selected peripheral(s)
** and eventually invokes event(s) of the bean.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
ISR(AD1_Interrupt)
{
AD1_OutV = ADCRL; /* Save measured value */
OutFlg = TRUE; /* Measured values are available */
AD1_OnEnd(); /* Invoke user event */
ModeFlg = STOP; /* Set the device to the stop mode */
}
/*
** ===================================================================
** Method : AD1_HWEnDi (bean ADC)
**
** Description :
** Enables or disables the peripheral(s) associated with the bean.
** The method is called automatically as a part of the Enable and
** Disable methods and several internal methods.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void AD1_HWEnDi(void)
{
if (ModeFlg) { /* Start or stop measurement? */
OutFlg = FALSE; /* Output value isn't available */
ADCSC1 = Channels; /* If yes then start the conversion */
}
}
/*
** ===================================================================
** Method : AD1_Measure (bean ADC)
**
** Description :
** This method performs one measurement on all channels that
** are set in the bean inspector. (Note: If the <number of
** conversions> is more than one the conversion of A/D
** channels is performed specified number of times.)
** Parameters :
** NAME - DESCRIPTION
** WaitForResult - Wait for a result
** of a conversion. If <interrupt service>
** is disabled, A/D peripheral doesn't
** support measuring all channels at once
** or Autoscan mode property isn't enabled
** and at the same time the <number of
** channel> is greater than 1, then the
** WaitForResult parameter is ignored and
** the method waits for each result every
** time. If the <interrupt service> is
** disabled and a <number of conversions>
** is greater than 1, the parameter is
** ignored and the method also waits for
** each result every time.
** Returns :
** --- - Error code, possible codes:
** ERR_OK - OK
** ERR_SPEED - This device does not work in
** the active speed mode
** ERR_DISABLED - Device is disabled
** ERR_BUSY - A conversion is already
** running
** ===================================================================
*/
#pragma MESSAGE DISABLE C5703 /* WARNING C5703: Parameter declared but not referenced */
byte AD1_Measure(bool WaitForResult)
{
if (ModeFlg != STOP) { /* Is the device in different mode than "stop"? */
return ERR_BUSY; /* If yes then error */
}
ModeFlg = MEASURE; /* Set state of device to the measure mode */
AD1_HWEnDi(); /* Enable the device */
if (WaitForResult) { /* Is WaitForResult TRUE? */
while (ModeFlg == MEASURE) {} /* If yes then wait for end of measurement */
}
return ERR_OK; /* OK */
}
/*
** ===================================================================
** Method : AD1_GetValue8 (bean ADC)
**
** Description :
** This method returns the last measured values of all
** channels justified to the left. Compared with <GetValue>
** method this method returns more accurate result if the
** <number of conversions> is greater than 1 and <AD
** resolution> is less than 8 bits. In addition, the user
** code dependency on <AD resolution> is eliminated.
** Parameters :
** NAME - DESCRIPTION
** * Values - Pointer to the array that
** contains the measured data.
** Returns :
** --- - Error code, possible codes:
** ERR_OK - OK
** ERR_SPEED - This device does not work in
** the active speed mode
** ERR_NOTAVAIL - Requested value not
** available
** ERR_OVERRUN - External trigger overrun
** flag was detected after the last value(s)
** was obtained (for example by GetValue).
** This error may not be supported on some
** CPUs (see generated code).
** ===================================================================
*/
byte AD1_GetValue8(byte *Values)
{
if (!OutFlg) { /* Is output flag set? */
return ERR_NOTAVAIL; /* If no then error */
}
*Values = AD1_OutV; /* Save measured values to the output buffer */
return ERR_OK; /* OK */
}
/*
** ===================================================================
** Method : AD1_GetValue16 (bean ADC)
**
** Description :
** This method returns the last measured values of all
** channels justified to the left. Compared with <GetValue>
** method this method returns more accurate result if the
** <number of conversions> is greater than 1 and <AD
** resolution> is less than 16 bits. In addition, the user
** code dependency on <AD resolution> is eliminated.
** Parameters :
** NAME - DESCRIPTION
** * Values - Pointer to the array that
** contains the measured data.
** Returns :
** --- - Error code, possible codes:
** ERR_OK - OK
** ERR_SPEED - This device does not work in
** the active speed mode
** ERR_NOTAVAIL - Requested value not
** available
** ERR_OVERRUN - External trigger overrun
** flag was detected after the last value(s)
** was obtained (for example by GetValue).
** This error may not be supported on some
** CPUs (see generated code).
** ===================================================================
*/
byte AD1_GetValue16(word *Values)
{
if (!OutFlg) { /* Is output flag set? */
return ERR_NOTAVAIL; /* If no then error */
}
*Values = (word)(((word)(AD1_OutV)) << 8); /* Save measured values to the output buffer */
return ERR_OK; /* OK */
}
/*
** ===================================================================
** Method : AD1_Init (bean ADC)
**
** Description :
** Initializes the associated peripheral(s) and the bean's
** internal variables. The method is called automatically as a
** part of the application initialization code.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void AD1_Init(void)
{
OutFlg = FALSE; /* No measured value */
ModeFlg = STOP; /* Device isn't running */
/* ADCSC2: ADACT=0,ADTRG=0,ACFE=0,ACFGT=0,??=0,??=0,??=0,??=0 */
setReg8(ADCSC2, 0x00); /* Disable HW trigger and autocompare */
/* ADCCFG: ADLPC=0,ADIV1=1,ADIV0=1,ADLSMP=0,MODE1=0,MODE0=0,ADICLK1=0,ADICLK0=1 */
setReg8(ADCCFG, 0x61); /* Set prescaler bits */
/* ADCSC1: COCO=0,AIEN=0,ADCO=0,ADCH4=1,ADCH3=1,ADCH2=1,ADCH1=1,ADCH0=1 */
setReg8(ADCSC1, 0x1F); /* Disable the module */
}
/* END AD1. */
/*
** ###################################################################
**
** This file was created by UNIS Processor Expert 3.00 [03.89]
** for the Freescale HCS08 series of microcontrollers.
**
** ###################################################################
*/
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -