testat45db161.fed

使用STR710的SPI接口访问外部EEPROM的例子程序.使用KEIL UV3编译.使用了MDK3.05操作系统.

;#<FEEDBACK># ARM Linker, RVCT3.0 [Build 951]: Last Updated: Mon Jan 28 17:49:04 2008
;VERSION 0.2
;FILE at45db161.o
AT45Delay <= USED 0
AT45_Reset <= USED 0
AutoPageRewriteThroughBuffer2 <= USED 0
;FILE bsp_gpio.o
SYS_IOint <= USED 0
Clear_WDT <= USED 0
;FILE bsp_uart.o
RS485_MUT_release <= USED 0
RS485_MUT_wait <= USED 0
UART_get_line <= USED 0
UART_rxd_data <= USED 0
clear_rxdbuf <= USED 0
;FILE bspi.o
BSPI_BufferReceive <= USED 0
BSPI_BufferSend <= USED 0
BSPI_RcFifoDepth <= USED 0
BSPI_RcItSrc <= USED 0
BSPI_TrFifoDepth <= USED 0
BSPI_TrItSrc <= USED 0
;FILE gpio.o
GPIO_BitWrite <= USED 0
GPIO_ByteWrite <= USED 0
;FILE main.o
;FILE rccu.o
RCCU_PLL2Config <= USED 0
RCCU_USBClockSource <= USED 0
;FILE retarget.o
_sys_exit <= USED 0
_ttywrch <= USED 0
;FILE rt_clock.o
os_psh_req <= USED 0
;FILE rt_event.o
isr_evt_set <= USED 0
os_evt_clr <= USED 0
os_evt_get <= USED 0
os_evt_set <= USED 0
os_evt_wait <= USED 0
;FILE rt_list.o
os_get_same_rdy_prio <= USED 0
os_psq_enq <= USED 0
os_resort_prio <= USED 0
;FILE rt_mailbox.o
isr_mbx_receive <= USED 0
isr_mbx_send <= USED 0
os_mbx_check <= USED 0
os_mbx_init <= USED 0
os_mbx_send <= USED 0
os_mbx_wait <= USED 0
;FILE rt_membox.o
_calloc_box <= USED 0
;FILE rt_mutex.o
os_mut_init <= USED 0
os_mut_release <= USED 0
os_mut_wait <= USED 0
;FILE rt_semaphore.o
isr_sem_send <= USED 0
os_sem_init <= USED 0
os_sem_send <= USED 0
os_sem_wait <= USED 0
;FILE rt_task.o
os_tsk_create_user_ex <= USED 0
os_tsk_pass <= USED 0
os_tsk_prio <= USED 0
os_tsk_self <= USED 0
;FILE rt_time.o
os_itv_set <= USED 0
os_itv_wait <= USED 0
;FILE rt_timer.o
os_tmr_create <= USED 0
os_tmr_kill <= USED 0
;FILE rtx_config.o
os_alloc_TMR <= USED 0
os_def_interrupt <= USED 0
os_tmr_force_irq <= USED 0
os_tmr_inspect_ovf <= USED 0
;FILE str71x.o
Vectors <= USED 0
;FILE uart.o
UART_9BitByteReceive <= USED 0
UART_9BitByteSend <= USED 0
UART_9BitDataReceive <= USED 0
UART_9BitDataSend <= USED 0
UART_ByteReceive <= USED 0
UART_DataReceive <= USED 0
UART_DataSend <= USED 0
UART_Init <= USED 0
UART_StringReceive <= USED 0
UART_StringSend <= USED 0
sendchar <= USED 0