project_1.txt

我在开发CC2500和CC1100时就用了SmartRF Studio调试软硬件,很好用的,我可以做出兼容chipcon的SmartRF 硬件,不知道有没人有兴趣?

=============================================================================
List of generated methods in project: Project_1

THIS TEXT DESCRIPTION IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
=============================================================================

Module "AD1"       (bean ADC)
   - AD1_MeasureChan -This method performs measurement on one channel. (Note: If the <number of conversions> is more than one 
                the conversion of the A/D channel is performed specified number of times.)
   - AD1_EnableIntChanTrigger -Enables the internal trigger mode. A conversion of one required channel will be launched by 
                internal sync pulse. If the <Number of conversions> property is greater than 1, a conversion will be launched 
                more than once (by an internal signal) according to <Number of conversions>. It's possible to disable the 
                trigger mode by <Stop> method. This EnableIntChanTrigger method is available only when the <Internal trigger> 
                property is enabled.
   - AD1_GetChanValue -Returns the last measured value of the required channel. Format and width of the value is a native 
                format of the A/D converter.
   - AD1_GetChanValue8 -This method returns the last measured value of required channel justified to the left. Compared with 
                <GetChanValue> method this method returns more accurate result if the <number of conversions> is greater than 1 
                and <AD resolution> is less than 8 bits. In addition, the user code dependency on <AD resolution> is eliminated.

Module "Bit1"      (bean BitIO)
   - Bit1_GetVal -Returns the input/output value. If the direction is [input] then the input value of the pin is read and 
                returned. If the direction is [output] then the last written value is returned (see <Safe mode> property for 
                limitations).
   - Bit1_PutVal -The specified output value is set. If the direction is [input], the bean saves the value to a memory or a 
                register and this value will be written to the pin after switching to the output mode (using [SetDir(TRUE)]; 
                see <Safe mode> property for limitations). If the direction is [output], it writes the value to the pin. 
                (Method is available only if the direction = _[output]_ or _[input/output]_).
   - Bit1_ClrVal -Clears (set to zero) the output value. It is equivalent to the [PutVal(FALSE)]. This method is available only 
                if the direction = _[output]_ or _[input/output]_.
   - Bit1_SetVal -Sets (to one) the output value. It is equivalent to the [PutVal(TRUE)]. This method is available only if the 
                direction = _[output]_ or _[input/output]_.

Module "Bit2"      (bean BitIO)
   - Bit2_GetVal -Returns the input/output value. If the direction is [input] then the input value of the pin is read and 
                returned. If the direction is [output] then the last written value is returned (see <Safe mode> property for 
                limitations).

Module "WDog1"     (bean WatchDog)
   - WDog1_Clear -Clears the watchdog timer (it makes the timer restart from zero).

Module "Cpu"       (bean MC9S08QD4_8)
   - Cpu_EnableInt -Enables maskable interrupts
   - Cpu_DisableInt -Disables maskable interrupts
   - Cpu_GetIdentification -This method returns the System identification register which contains identification number and 
                revision of the chip.
   - Cpu_Delay100US -This method realizes software delay. The length of delay is at least 100 microsecond multiply input 
                parameter [us100]. As the delay implementation is not based on real clock, the delay time may be increased by 
                interrupt service routines processed during the delay. The method is independent on selected speed mode.

===================================================================================