📄 upsd3200.h
字号:
/*--------------------------------------------------------------------------
uPSD3200.h
Version:
July 2004 Version 0.4 - Updated SFRs and bit definitions.
June 2004 Version 0.3 - Modified comments.
Dependencies: None.
Description:
Header file for uPSD3200 microcontroller.
Copyright (c) 2004 ST Microelectronics
This example demo code is provided as is and has no warranty,
implied or otherwise. You are free to use/modify any of the provided
code at your own risk in your applications with the expressed limitation
of liability (see below) so long as your product using the code contains
at least one uPSD product (device).
LIMITATION OF LIABILITY: NEITHER STMicroelectronics NOR ITS VENDORS OR
AGENTS SHALL BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, LOSS OF DATA,
INTERRUPTION OF BUSINESS, NOR FOR INDIRECT, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER THIS AGREEMENT OR
OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
--------------------------------------------------------------------------*/
#ifndef _UPSD_H_
#define _UPSD_H_
typedef struct // general structure of 8 bit register allowing bit access
{
unsigned char bit0 : 1;
unsigned char bit1 : 1;
unsigned char bit2 : 1;
unsigned char bit3 : 1;
unsigned char bit4 : 1;
unsigned char bit5 : 1;
unsigned char bit6 : 1;
unsigned char bit7 : 1;
} Register;
typedef union // allow bit or byte access to registers
{
char byte;
Register bits;
} xdata Mix_Reg;
typedef union // allow bit or byte access to registers
{
char byte;
Register bits;
} SFR_Reg;
/* ------------------------------ */
/* Standard PSD Registers */
/* ------------------------------ */
typedef xdata struct REG_PSD_struct {
unsigned char DATAIN_A; // PSD_REG_BASE +0x00
unsigned char DATAIN_B; // +0x01
unsigned char CONTROL_A; // +0x02
unsigned char CONTROL_B; // +0x03
unsigned char DATAOUT_A; // +0x04
unsigned char DATAOUT_B; // +0x05
unsigned char DIRECTION_A; // +0x06
unsigned char DIRECTION_B; // +0x07
unsigned char DRIVE_A; // +0x08
unsigned char DRIVE_B; // +0x09
unsigned char IMC_A; // +0x0A
unsigned char IMC_B; // +0x0B
unsigned char OUTENABLE_A; // +0x0C
unsigned char OUTENABLE_B; // +0x0D
unsigned char res2[2]; // spacer
unsigned char DATAIN_C; // +0x10
unsigned char DATAIN_D; // +0x11
unsigned char DATAOUT_C; // +0x12
unsigned char DATAOUT_D; // +0x13
unsigned char DIRECTION_C; // +0x14
unsigned char DIRECTION_D; // +0x15
unsigned char DRIVE_C; // +0x16
unsigned char DRIVE_D; // +0x17
unsigned char IMC_C; // +0x18
unsigned char res1a; // spacer
unsigned char OUTENABLE_C; // +0x1A
unsigned char OUTENABLE_D; // +0x1B
unsigned char res4[4]; // spacer
unsigned char OMC_AB; // +0x20
unsigned char OMC_BC; // +0x21
unsigned char OMCMASK_AB; // +0x22
unsigned char OMCMASK_BC; // +0x23
unsigned char res8c[0x8C]; // spacer
unsigned char PMMR0; // +0xB0
unsigned char res1b; // spacer
unsigned char PMMR1; // +0xB2
unsigned char res1c; // spacer
unsigned char PMMR2; // +0xB4
unsigned char res0B[0x0B]; // spacer
unsigned char MAINPROTECT; // +0xC0
unsigned char res1d; // spacer
unsigned char ALTPROTECT; // +0xC2
unsigned char res4a[4]; // spacer
unsigned char JTAG; // +0xC7
unsigned char res18[0x18]; // spacer
unsigned char PAGE; // +0xE0
unsigned char res1e; // spacer
unsigned char VM; // +0xE2
unsigned char res29[0x1d]; // spacer
} PSD_REGS;
//****************** PSD control register bit definitions *********
//PSD PORTA
#define PA0 bit0
#define PA1 bit1
#define PA2 bit2
#define PA3 bit3
#define PA4 bit4
#define PA5 bit5
#define PA6 bit6
#define PA7 bit7
//PSD PORTB
#define PB0 bit0
#define PB1 bit1
#define PB2 bit2
#define PB3 bit3
#define PB4 bit4
#define PB5 bit5
#define PB6 bit6
#define PB7 bit7
//PSD PORTC
#define PC0 bit0
#define PC1 bit1
#define PC2 bit2
#define PC3 bit3
#define PC4 bit4
#define PC5 bit5
#define PC6 bit6
#define PC7 bit7
//PSD PORTD
#define PD1 bit1
#define PD2 bit2
//PSD PMMR0
#define APD_ENABLE bit1
#define PLD_TURBO bit3
#define PLD_ARRAY_CLK bit4
#define PLD_MCELL_CLK bit5
//PSD PMMR2
#define PLD_CNTL0 bit2
#define PLD_CNTL1 bit3
#define PLD_CNTL2 bit4
#define PLD_ALE bit5
#define PLD_DBE bit6
//PSD VM
#define SRAM_CODE bit0
#define EE_CODE bit1
#define FL_CODE bit2
#define EE_DATA bit3
#define FL_DATA bit4
#define PIO_EN bit7
// Common Misc. Defines...
#ifndef TRUE
#define TRUE 0x01
#endif
#ifndef FALSE
#define FALSE 0x00
#endif
#ifndef ON
#define ON 0x01
#endif
#ifndef OFF
#define OFF 0x00
#endif
#ifndef NULL
#define NULL 0x00
#endif
/* ------------------------------ */
/* Standard 8051 MCU Registers */
/* ------------------------------ */
// sfr P0 = 0x80; // Port 0 - Always used for External Memory Access (no access)
sfr P1 = 0x90; // Port 1
// sfr P2 = 0xA0; // Port 2 - Always used for External Memory Access (no access)
sfr P3 = 0xB0; // Port 3
sfr PSW = 0xD0; // Program Status Word
sfr ACC = 0xE0; // Accumulator
sfr B = 0xF0; // Register B
sfr SP = 0x81; // Stack Pointer
sfr DPL = 0x82; // Data Pointer low byte
sfr DPH = 0x83; // Data Pointer high byt
sfr PCON = 0x87; // MCU Power Control Register
sfr TCON = 0x88; // Timer / Counter Control
sfr TMOD = 0x89; // Timer / Counter Mode
sfr TL0 = 0x8A; // Timer 0 low byte
sfr TL1 = 0x8B; // Timer 1 low byte
sfr TH0 = 0x8C; // Timer 0 high byte
sfr TH1 = 0x8D; // Timer 1 high byte
sfr IE = 0xA8; // Interrupt Enable (main)
sfr IP = 0xB8; // Interrupt Priority (main)
sfr SCON = 0x98; // UART0 Serial Control
sfr SCON0 = 0x98; // SCON also known as SCCON0
sfr SBUF = 0x99; // UART0 Serial Buffer
sfr SBUF0 = 0x99; // SBUF as known as SBUF0
/* ------------------------ */
/* Common 8052 Extensions */
/* ------------------------ */
sfr T2CON = 0xC8; // Timer 2 Control
sfr T2MOD = 0xC9; // Timer 2 Mode
sfr RCAP2L = 0xCA; // Timer 2 Reload low byte
sfr RCAP2H = 0xCB; // Timer 2 Reload high byte
sfr TL2 = 0xCC; // Timer 2 low byte
sfr TH2 = 0xCD; // Timer 2 high byte
/* ------------------------ */
/* UPSD 3200 Extensions */
/* ------------------------ */
sfr P4 = 0xC0; // New port 4
sfr P1SFS = 0x91; // Port 1 I/O select
sfr P3SFS = 0x93; // Port 3 I/O select
sfr P4SFS = 0x94; // Port 4 I/O select
// --- ADC SFRs ---
sfr ASCL = 0x95; // ADC Clock Prescaler 8-bit
sfr ADAT = 0x96; // ADC Data Value
sfr ACON = 0x97; // ADC Control Register
// --- UART2 SFRS ----
sfr SCON2 = 0x9A; // UART2 Serial Control
sfr SBUF2 = 0x9B; // UART2 Serial Buffer
// --- PWM SFRs -----
sfr PWMCON = 0xA1; // PWM Polarity Control
sfr PWM0 = 0xA2; // PWM0 Duty Cycle
sfr PWM1 = 0xA3; // PWM1 Duty Cycle
sfr PWM2 = 0xA4; // PWM2 Duty Cycle
sfr PWM3 = 0xA5; // PWM3 Duty Cycle
sfr PSCL0L = 0xB1; // 8-bit PWM0 Prescaler low
sfr PSCL0H = 0xB2; // 8-bit PWM0 Prescaler high
sfr PSCL1L = 0xB3; // 8-bit PWM1 Prescaler low
sfr PSCL1H = 0xB4; // 8-bit PWM1 Prescaler high
// --- WDT SFRs ---
sfr WDRST = 0xA6; // Watch Dog Reset
sfr WDKEY = 0xAE; // Watch Dog Key Enable
// --- INTERRUPT 2 SFRs ---
sfr IEA = 0xA7; // Interrupt Enable (2nd)
sfr IPA = 0xB7; // Interrupt Priority (2nd)
// --- I2C S1/S2 & DDC SFRs ---
sfr S1SETUP = 0xD1; // DDC-I2C S1 Setup Control
sfr S2SETUP = 0xD2; // I2C S2 Setup Control
sfr RAMBUF = 0xD4; // DDC Ram Buffer Access
sfr DDCDAT = 0xD5; // DDC I2C Xmit register
sfr DDCADR = 0xD6; // DDC Memory Address Pointer
sfr DDCCON = 0xD7; // DDC Control Register
sfr S1CON = 0xD8; // DDC I2C S1 Control
sfr S1STA = 0xD9; // DDC I2C Status
sfr S1DAT = 0xDA; // DDC I2C Data Hold Register
sfr S1ADR = 0xDB; // DDC I2C Bus Address
sfr S2CON = 0xDC; // I2C S2 Control
sfr S2STA = 0xDD; // I2C S2 Status
sfr S2DAT = 0xDE; // I2C S2 Data Hold Register
sfr S2ADR = 0xDF; // I2C S2 Bus Address
// --- USB SFRs ---
sfr USCL = 0xE1; // USB Clock 8bit prescaler register
sfr UDT1 = 0xE6; // USB End Point 1 Data Register
sfr UDT0 = 0xE7; // USB End Point 0 Data register
sfr UISTA = 0xE8; // USB Interrupt Status
sfr UIEN = 0xE9; // USB Interrupt Enable
sfr UCON0 = 0xEA; // USB End Point 0 Control
sfr UCON1 = 0xEB; // USB End Point 1 Control
sfr UCON2 = 0xEC; // USB End Point 2 Control
sfr USTA = 0xED; // USB End Point 0 Status
sfr UADR = 0xEE; // USB Address Register
sfr UDR0 = 0xEF; // USB Endpoint 0 Data Receive
/* --------------------------- */
/* Common 8051 BIT Registers */
/* --------------------------- */
/* PSW */
sbit CY = PSW^7;
sbit AC = PSW^6;
sbit F0 = PSW^5;
sbit RS1 = PSW^4;
sbit RS0 = PSW^3;
sbit OV = PSW^2;
sbit P = PSW^0;
/* SCON (SCON0) */
sbit SM0 = SCON^7; // Standard 8051 Uart Control
sbit SM1 = SCON^6;
sbit SM2 = SCON^5;
sbit REN = SCON^4;
sbit TB8 = SCON^3;
sbit RB8 = SCON^2;
sbit TI = SCON^1;
sbit RI = SCON^0;
/* TCON */
sbit TF1 = TCON^7; // Standard 8051 timer control
sbit TR1 = TCON^6;
sbit TF0 = TCON^5;
sbit TR0 = TCON^4;
sbit IE1 = TCON^3;
sbit IT1 = TCON^2;
sbit IE0 = TCON^1;
sbit IT0 = TCON^0;
/* IE */
sbit EA = IE^7; // Enable All interrupts
sbit ET2 = IE^5; // Timer 2
sbit ES = IE^4; // Usart 0
sbit ET1 = IE^3; // Timer 1
sbit EX1 = IE^2; // External Int1
sbit ET0 = IE^1; // Timer 0
sbit EX0 = IE^0; // External Int0
/* IP */
sbit PT2 = IP^5; // Timer 2
sbit PS = IP^4; // Usart 0
sbit PT1 = IP^3; // Timer 1
sbit PX1 = IP^2; // Ext Int1
sbit PT0 = IP^1; // Timer 0
sbit PX0 = IP^0; // Ext Int 0
/* T2CON */
sbit TF2 = T2CON^7;
sbit EXF2 = T2CON^6;
sbit RCLK = T2CON^5;
sbit TCLK = T2CON^4;
sbit EXEN2 = T2CON^3;
sbit TR2 = T2CON^2;
sbit C_T2 = T2CON^1;
sbit CP_RL2 = T2CON^0;
/* P1 GPIO */
sbit P1_7 = P1^7; // bit 7 of P1
sbit P1_6 = P1^6; // bit 6 of P1
sbit P1_5 = P1^5; // bit 5 of P1
sbit P1_4 = P1^4; // bit 4 of P1
sbit P1_3 = P1^3; // bit 3 of P1
sbit P1_2 = P1^2; // bit 2 of P1
sbit P1_1 = P1^1; // bit 1 of P1
sbit P1_0 = P1^0; // bit 0 of P1
/* P3 GPIO */
sbit P3_7 = P3^7; // bit 7 of P3
sbit P3_6 = P3^6; // bit 6 of P3
sbit P3_5 = P3^5; // bit 5 of P3
sbit P3_4 = P3^4; // bit 4 of P3
sbit P3_3 = P3^3; // bit 3 of P3
sbit P3_2 = P3^2; // bit 2 of P3
sbit P3_1 = P3^1; // bit 1 of P3
sbit P3_0 = P3^0; // bit 0 of P3
/* P4 GPIO */
sbit P4_7 = P4^7; // bit 7 of P4
sbit P4_6 = P4^6; // bit 6 of P4
sbit P4_5 = P4^5; // bit 5 of P4
sbit P4_4 = P4^4; // bit 4 of P4
sbit P4_3 = P4^3; // bit 3 of P4
sbit P4_2 = P4^2; // bit 2 of P4
sbit P4_1 = P4^1; // bit 1 of P4
sbit P4_0 = P4^0; // bit 0 of P4
/* S1CON */
sbit CR2 = S1CON^7;
sbit ENI1 = S1CON^6;
sbit STA = S1CON^5;
sbit STO = S1CON^4;
sbit ADDR = S1CON^3;
sbit AA = S1CON^2;
sbit CR1 = S1CON^1;
sbit CR0 = S1CON^0;
/* UISTA */
sbit SUSPND = UISTA^7;
sbit RSTF = UISTA^5;
sbit TXD0F = UISTA^4;
sbit RXD0F = UISTA^3;
sbit RXD1F = UISTA^2;
sbit EOPF = UISTA^1;
sbit RESUMF = UISTA^0;
/* -----------------------------------
Interrupt Vectors:
Interrupt Address = (Number * 8) + 3
------------------------------------ */
#define RESET_VECTOR_ADDR 0 // Reset Address = 0
#define IE0_VECTOR 0 // 0x03 External Interrupt 0
#define IEO_VECTOR_ADDR 0x03
#define TF0_VECTOR 1 //0x0B Timer 0
#define TF0_VECTOR_ADDR 0x0B
#define IE1_VECTOR 2 //0x13 External Interrupt 1
#define IE1_VECTOR_ADDR 0x13
#define TF1_VECTOR 3 //0x1B Timer 1
#define TF1_VECTOR_ADDR 0x1B
#define SIO_VECTOR 4 //0x23 Serial Port 0
#define SIO_VECTOR_ADDR 0x23
#define TF2_VECTOR 5 //0x2B Timer 2
#define TF2_VECTOR_ADDR 0x2B
#define USB_VECTOR 6 //0x33 USB
#define USB_VECTOR_ADDR 0x33
#define DDC_VECTOR 7 //0x3B DDC
#define DDC_VECTOR_ADDR 0x3B
#define I2C_VECTOR 8 //0x43 I2C
#define I2C_VECTOR_ADDR 0x43
#define SIO1_VECTOR 9 //0x4B Serial Port 1
#define SIO1_VECTOR_ADDR 0x4B
/* ---------------------------------- */
#endif
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -