i2c master.plg

Demo for I2C Master and Slave

compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2241
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Load "E:\\DK3200-I2C\\I2C Master\\dk3200_c\\I2C Master" 
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
 Updating Flash/FlashBoot code/data to 'DK3200_1.OBJ' file ...
 
 Warning ADR002: No data file has been specified for FS0.
 Warning ADR002: No data file has been specified for FS1.
 Warning ADR002: No data file has been specified for FS2.
 Warning ADR002: No data file has been specified for FS3.
 Warning ADR002: No data file has been specified for FS4.
 Warning ADR002: No data file has been specified for FS5.
 Warning ADR002: No data file has been specified for FS6.
 Warning ADR002: No data file has been specified for FS7.
 Warning ADR002: No data file has been specified for CSBOOT1.
 Warning ADR002: No data file has been specified for CSBOOT2.
 Warning ADR002: No data file has been specified for CSBOOT3.
 Address Translation complete.
 
 Warning encountered - reference DK3200_1.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time:  7.3 sec
Build target 'Target 1'
compiling main.c...
compiling uPSD_I2C.c...
compiling upsd_timer.c...
compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2241
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling main.c...
compiling uPSD_I2C.c...
compiling upsd_timer.c...
compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2242
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Load "E:\\DK3200-I2C\\I2C Master\\dk3200_c\\I2C Master" 
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
 Updating Flash/FlashBoot code/data to 'DK3200_1.OBJ' file ...
 
 Warning ADR002: No data file has been specified for FS0.
 Warning ADR002: No data file has been specified for FS1.
 Warning ADR002: No data file has been specified for FS2.
 Warning ADR002: No data file has been specified for FS3.
 Warning ADR002: No data file has been specified for FS4.
 Warning ADR002: No data file has been specified for FS5.
 Warning ADR002: No data file has been specified for FS6.
 Warning ADR002: No data file has been specified for FS7.
 Warning ADR002: No data file has been specified for CSBOOT1.
 Warning ADR002: No data file has been specified for CSBOOT2.
 Warning ADR002: No data file has been specified for CSBOOT3.
 Address Translation complete.
 
 Warning encountered - reference DK3200_1.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time:  7.0 sec
Build target 'Target 1'
compiling main.c...
compiling uPSD_I2C.c...
compiling upsd_timer.c...
compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2242
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling main.c...
linking...
Program Size: data=91.3 xdata=300 code=2241
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling main.c...
compiling uPSD_I2C.c...
compiling upsd_timer.c...
compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2225
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Load "E:\\DK3200-I2C\\I2C Master\\dk3200_c\\I2C Master" 
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
 Updating Flash/FlashBoot code/data to 'DK3200_1.OBJ' file ...
 
 Warning ADR002: No data file has been specified for FS0.
 Warning ADR002: No data file has been specified for FS1.
 Warning ADR002: No data file has been specified for FS2.
 Warning ADR002: No data file has been specified for FS3.
 Warning ADR002: No data file has been specified for FS4.
 Warning ADR002: No data file has been specified for FS5.
 Warning ADR002: No data file has been specified for FS6.
 Warning ADR002: No data file has been specified for FS7.
 Warning ADR002: No data file has been specified for CSBOOT1.
 Warning ADR002: No data file has been specified for CSBOOT2.
 Warning ADR002: No data file has been specified for CSBOOT3.
 Address Translation complete.
 
 Warning encountered - reference DK3200_1.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time:  7.3 sec
Build target 'Target 1'
compiling main.c...
compiling uPSD_I2C.c...
compiling upsd_timer.c...
compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2225
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling main.c...
linking...
Program Size: data=91.3 xdata=300 code=2226
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Load "E:\\DK3200-I2C\\I2C Master\\dk3200_c\\I2C Master" 
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
 Updating Flash/FlashBoot code/data to 'DK3200_1.OBJ' file ...
 
 Warning ADR002: No data file has been specified for FS0.
 Warning ADR002: No data file has been specified for FS1.
 Warning ADR002: No data file has been specified for FS2.
 Warning ADR002: No data file has been specified for FS3.
 Warning ADR002: No data file has been specified for FS4.
 Warning ADR002: No data file has been specified for FS5.
 Warning ADR002: No data file has been specified for FS6.
 Warning ADR002: No data file has been specified for FS7.
 Warning ADR002: No data file has been specified for CSBOOT1.
 Warning ADR002: No data file has been specified for CSBOOT2.
 Warning ADR002: No data file has been specified for CSBOOT3.
 Address Translation complete.
 
 Warning encountered - reference DK3200_1.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time:  7.3 sec
Build target 'Target 1'
compiling main.c...
linking...
Program Size: data=91.3 xdata=300 code=2225
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Load "E:\\DK3200-I2C\\I2C Master\\dk3200_c\\I2C Master" 
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
 Updating Flash/FlashBoot code/data to 'DK3200_1.OBJ' file ...
 
 Warning ADR002: No data file has been specified for FS0.
 Warning ADR002: No data file has been specified for FS1.
 Warning ADR002: No data file has been specified for FS2.
 Warning ADR002: No data file has been specified for FS3.
 Warning ADR002: No data file has been specified for FS4.
 Warning ADR002: No data file has been specified for FS5.
 Warning ADR002: No data file has been specified for FS6.
 Warning ADR002: No data file has been specified for FS7.
 Warning ADR002: No data file has been specified for CSBOOT1.
 Warning ADR002: No data file has been specified for CSBOOT2.
 Warning ADR002: No data file has been specified for CSBOOT3.
 Address Translation complete.
 
 Warning encountered - reference DK3200_1.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time:  7.0 sec
Build target 'Target 1'
compiling main.c...
compiling uPSD_I2C.c...
compiling upsd_timer.c...
compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2225
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Build target 'Target 1'
compiling main.c...
compiling uPSD_I2C.c...
compiling upsd_timer.c...
compiling upsd_LCD.c...
assembling Startu32.a51...
linking...
Program Size: data=91.3 xdata=300 code=2225
creating hex file from "I2C Master"...
"I2C Master" - 0 Error(s), 0 Warning(s).
Load "E:\\DK3200-I2C\\I2C Master\\dk3200_c\\I2C Master" 
UTLADRM - Merge MCU Firmware Utility
PSDsoft Express Utility 8.03 Copyright (C) 1993-2004 STMicroelectronics, Inc.
All Rights Reserved
 Updating Flash/FlashBoot code/data to 'DK3200_1.OBJ' file ...
 
 Warning ADR002: No data file has been specified for FS0.
 Warning ADR002: No data file has been specified for FS1.
 Warning ADR002: No data file has been specified for FS2.
 Warning ADR002: No data file has been specified for FS3.
 Warning ADR002: No data file has been specified for FS4.
 Warning ADR002: No data file has been specified for FS5.
 Warning ADR002: No data file has been specified for FS6.
 Warning ADR002: No data file has been specified for FS7.
 Warning ADR002: No data file has been specified for CSBOOT1.
 Warning ADR002: No data file has been specified for CSBOOT2.
 Warning ADR002: No data file has been specified for CSBOOT3.
 Address Translation complete.
 
 Warning encountered - reference DK3200_1.ERR for warning.
Erasing Flash...
Erasing PLD/ACR...
Programming Flash Block 0 (FS0).
Programming Flash Boot Block 0 (CSBOOT0).
Programming PLD.
Programming ACR (2 bit).
Programming ACR (1 bit).
Programming USERCODE.
Verifying Flash Block 0 (FS0).
Verifying Flash Boot Block 0 (CSBOOT0).
Verifying PLD.
Verifying ACR (2 bit).
Verifying ACR (1 bit).
Verifying USERCODE.
Total Flash Programming time:  7.3 sec