aha1740.h

LINUX1.0内核源代码,学习LINUX编程的一定要看。

#ifndef _AHA1740_H

/* $Id$
 *
 * Header file for the adaptec 1740 driver for Linux
 *
 * With minor revisions 3/31/93
 * Written and (C) 1992,1993 Brad McLean.  See aha1740.c
 * for more info
 *
 */

#include <linux/types.h>

/* Eisa Enhanced mode operation - slot locating and addressing */
#define MINEISA 1   /* I don't have an EISA Spec to know these ranges, so I */
#define MAXEISA 8   /* Just took my machine's specifications.  Adjust to fit.*/
		    /* I just saw an ad, and bumped this from 6 to 8 */
#define	SLOTBASE(x)	((x << 12)+ 0xc80 )
#define	BASE		(base)

/* EISA configuration registers & values */
#define	HID0	(base + 0x0)
#define	HID1	(base + 0x1)
#define HID2	(base + 0x2)
#define	HID3	(base + 0x3)
#define	EBCNTRL	(base + 0x4)
#define	PORTADR	(base + 0x40)
#define BIOSADR (base + 0x41)
#define INTDEF	(base + 0x42)
#define SCSIDEF (base + 0x43)
#define BUSDEF	(base + 0x44)
#define	RESV0	(base + 0x45)
#define RESV1	(base + 0x46)
#define	RESV2	(base + 0x47)

#define	HID_MFG	"ADP"
#define	HID_PRD 0
#define HID_REV 2
#define EBCNTRL_VALUE 1
#define PORTADDR_ENH 0x80
/* READ */
#define	G2INTST	(BASE + 0x56)
#define G2STAT	(BASE + 0x57)
#define	MBOXIN0	(BASE + 0x58)
#define	MBOXIN1	(BASE + 0x59)
#define	MBOXIN2	(BASE + 0x5a)
#define	MBOXIN3	(BASE + 0x5b)
#define G2STAT2	(BASE + 0x5c)

#define G2INTST_MASK		0xf0	/* isolate the status */
#define	G2INTST_CCBGOOD		0x10	/* CCB Completed */
#define	G2INTST_CCBRETRY	0x50	/* CCB Completed with a retry */
#define	G2INTST_HARDFAIL	0x70	/* Adapter Hardware Failure */
#define	G2INTST_CMDGOOD		0xa0	/* Immediate command success */
#define G2INTST_CCBERROR	0xc0	/* CCB Completed with error */
#define	G2INTST_ASNEVENT	0xd0	/* Asynchronous Event Notification */
#define	G2INTST_CMDERROR	0xe0	/* Immediate command error */

#define G2STAT_MBXOUT	4	/* Mailbox Out Empty Bit */
#define	G2STAT_INTPEND	2	/* Interrupt Pending Bit */
#define	G2STAT_BUSY	1	/* Busy Bit (attention pending) */

#define G2STAT2_READY	0	/* Host Ready Bit */

/* WRITE (and ReadBack) */
#define	MBOXOUT0	(BASE + 0x50)
#define	MBOXOUT1	(BASE + 0x51)
#define	MBOXOUT2	(BASE + 0x52)
#define	MBOXOUT3	(BASE + 0x53)
#define	ATTN		(BASE + 0x54)
#define G2CNTRL		(BASE + 0x55)

#define	ATTN_IMMED	0x10	/* Immediate Command */
#define	ATTN_START	0x40	/* Start CCB */
#define	ATTN_ABORT	0x50	/* Abort CCB */

#define G2CNTRL_HRST	0x80		/* Hard Reset */
#define G2CNTRL_IRST	0x40		/* Clear EISA Interrupt */
#define G2CNTRL_HRDY	0x20		/* Sets HOST ready */

/* This is used with scatter-gather */
struct aha1740_chain {
  ulong  dataptr;		/* Location of data */
  ulong  datalen;		/* Size of this part of chain */
};

/* These belong in scsi.h */
#define any2scsi(up, p)				\
(up)[0] = (((unsigned long)(p)) >> 16)  ;	\
(up)[1] = (((unsigned long)(p)) >> 8);		\
(up)[2] = ((unsigned long)(p));

#define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )

#define xany2scsi(up, p)	\
(up)[0] = ((long)(p)) >> 24;	\
(up)[1] = ((long)(p)) >> 16;	\
(up)[2] = ((long)(p)) >> 8;	\
(up)[3] = ((long)(p));

#define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
		      + (((long)(up)[2]) <<  8) +  ((long)(up)[3]) )

#define MAX_CDB 12
#define MAX_SENSE 14
#define MAX_STATUS 32

struct ecb {			/* Enhanced Control Block 6.1 */
  ushort cmdw;			/* Command Word */
  			/* Flag Word 1 */
  ushort	cne:1,		/* Control Block Chaining */
	:6,	di:1,		/* Disable Interrupt */
	:2,	ses:1,		/* Suppress Underrun error */
	:1,	sg:1,		/* Scatter/Gather */
	:1,	dsb:1,		/* Disable Status Block */
		ars:1;		/* Automatic Request Sense */
  			/* Flag Word 2 */
  ushort	lun:3,		/* Logical Unit */
		tag:1,		/* Tagged Queuing */
		tt:2,		/* Tag Type */
		nd:1,		/* No Disconnect */
	:1,	dat:1,		/* Data transfer - check direction */
		dir:1,		/* Direction of transfer 1 = datain */
		st:1,		/* Suppress Transfer */
		chk:1,		/* Calculate Checksum */
	:2,	rec:1,	:1;	/* Error Recovery */
  ushort nil0;			/* nothing */
  ulong  dataptr;		/* Data or Scatter List ptr */
  ulong	 datalen;		/* Data or Scatter List len */
  ulong  statusptr;		/* Status Block ptr */
  ulong  linkptr;		/* Chain Address */
  ulong  nil1;			/* nothing */
  ulong  senseptr;		/* Sense Info Pointer */
  unchar senselen;		/* Sense Length */
  unchar cdblen;		/* CDB Length */
  ushort datacheck;		/* Data checksum */
  unchar cdb[MAX_CDB];		/* CDB area */
  /* Hardware defined portion ends here, rest is driver defined */
  unchar sense[MAX_SENSE];	/* Sense area */ 
  unchar status[MAX_STATUS];	/* Status area */
  Scsi_Cmnd *SCpnt;		/* Link to the SCSI Command Block */
  void (*done)(Scsi_Cmnd *);	/* Completion Function */
};

#define	AHA1740CMD_NOP	 0x00	/* No OP */
#define AHA1740CMD_INIT	 0x01	/* Initiator SCSI Command */
#define AHA1740CMD_DIAG	 0x05	/* Run Diagnostic Command */
#define AHA1740CMD_SCSI	 0x06	/* Initialize SCSI */
#define AHA1740CMD_SENSE 0x08	/* Read Sense Information */
#define AHA1740CMD_DOWN  0x09	/* Download Firmware (yeah, I bet!) */
#define AHA1740CMD_RINQ  0x0a	/* Read Host Adapter Inquiry Data */
#define AHA1740CMD_TARG  0x10	/* Target SCSI Command */

int aha1740_detect(int);
int aha1740_command(Scsi_Cmnd *);
int aha1740_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
int aha1740_abort(Scsi_Cmnd *, int);
const char *aha1740_info(void);
int aha1740_reset(Scsi_Cmnd *);
int aha1740_biosparam(int, int, int*);

#define AHA1740_ECBS 32
#define AHA1740_SCATTER 16

#ifndef NULL
#define NULL 0
#endif

#define AHA1740 {"Adaptec 1740", aha1740_detect,	\
		aha1740_info, aha1740_command,		\
		aha1740_queuecommand,			\
		aha1740_abort,				\
		aha1740_reset,				\
	        NULL,		                        \
		aha1740_biosparam,                      \
		AHA1740_ECBS, 7, AHA1740_SCATTER, 1, 0, 0}

#endif