target.c

LPC2100DEMO板开发原代码,包括网络键盘定时器发光管等驱动代码

/*******************************************************************************************************
**                                     西安傅立叶电子科技
**                                Xian FFT Electornic Technology
**                                   http://www.fftchina.com
********************************************************************************************************/

//Descriptions:		header file of the specific codes for LPC2200 target boards
//                      Every project should include a copy of this file, user may modify it as needed

#define IN_TARGET
#include "config.h"

/*********************************************************************************************************
** Function name: IRQ_Exception
** Descriptions:  interrupt exceptional handler , change it as needed
********************************************************************************************************/
        void IRQ_Exception(void)
{
    while(1);                   //  change it to your code
}

/*********************************************************************************************************
** Function name: FIQ_Exception
** Descriptions:  Fast interrupt exceptional handler , change it as needed
********************************************************************************************************/
        void FIQ_Exception(void)
{
    while(1);                   // change it to your code
}
/*********************************************************************************************************
** Function name: Timer0_Exception
** Descriptions:  Timer0 interrupt service function
********************************************************************************************************/
        void Timer0_Exception(void)
{
    T0IR = 0x01;
    VICVectAddr = 0;            //interrupt close
    OSTimeTick();
}

/*********************************************************************************************************
** Function name: Timer0Init
** Descriptions:  Initialize the Time0
********************************************************************************************************/
        void Timer0Init(void)
{
    T0IR = 0xffffffff;
    T0TC = 0;
    T0TCR = 0x01;
    T0MCR = 0x03;
    T0MR0 = (Fpclk / OS_TICKS_PER_SEC);
 }

/*********************************************************************************************************
** Function name: VICInit
** Descriptions:  Initialize the Interrupt Vevtor Controller
********************************************************************************************************/
        void VICInit(void)
{
    extern void IRQ_Handler(void);
    extern void Timer0_Handler(void);

    VICIntEnClr = 0xffffffff;
    VICDefVectAddr = (uint32)IRQ_Handler;

    VICVectAddr0 = (uint32)Timer0_Handler;
    VICVectCntl0 = (0x20 | 0x04);
    VICIntEnable = 1 << 4;
 }

/*********************************************************************************************************
** Function name: TargetInit
** Descriptions:  Initialize the target board; it is called in a necessary place, change it as 
********************************************************************************************************/
        void TargetInit(void)
{
    OS_ENTER_CRITICAL();
    srand((uint32) TargetInit);
    VICInit();
    Timer0Init();
    OS_EXIT_CRITICAL();
}

/*********************************************************************************************************
** Function name: InitialiseUART0
** Descriptions:  Initialize the Uart0
********************************************************************************************************/

        void InitialiseUART0(uint32 bps)
{  	
    uint16 Fdiv;
    
    PINSEL0 = (PINSEL0 & 0xfffffff0) | 0x05;    /* Select the pins for Uart*/

    U0LCR = 0x80;                               /* Enable to access the frequenc regecter*/
    Fdiv = (Fpclk / 16) / bps;                  /* Set the baudrate*/
    U0DLM = Fdiv / 256;							
	U0DLL = Fdiv % 256;						
    U0LCR = 0x03;                               /* Disable to access the frequenc regecter*/
                                                /* set to 8,1,n*/
    U0IER = 0x00;                               /* Disable interrupt*/
    U0FCR = 0x00;                               /* initial FIFO*/
} 

/*********************************************************************************************************
** Function name: TargetResetInit
** Descriptions:  Initialize the target 
********************************************************************************************************/
        void TargetResetInit(void)
{
#ifdef __DEBUG    
    MEMMAP = 0x3;                   //remap
#endif

#ifdef __OUT_CHIP    
    MEMMAP = 0x3;                   //remap
#endif

#ifdef __IN_CHIP    
    MEMMAP = 0x1;                   //remap
#endif

    PINSEL0 = (PINSEL0 & 0xFFFF0000) | 0x05 | 0x50;

/* Set system timers for each component */
    PLLCON = 1;
#if (Fpclk / (Fcclk / 4)) == 1
    VPBDIV = 0;
#endif
#if (Fpclk / (Fcclk / 4)) == 2
    VPBDIV = 2;
#endif
#if (Fpclk / (Fcclk / 4)) == 4
    VPBDIV = 1;
#endif

#if (Fcco / Fcclk) == 2
    PLLCFG = ((Fcclk / Fosc) - 1) | (0 << 5);
#endif
#if (Fcco / Fcclk) == 4
    PLLCFG = ((Fcclk / Fosc) - 1) | (1 << 5);
#endif
#if (Fcco / Fcclk) == 8
    PLLCFG = ((Fcclk / Fosc) - 1) | (2 << 5);
#endif
#if (Fcco / Fcclk) == 16
    PLLCFG = ((Fcclk / Fosc) - 1) | (3 << 5);
#endif
    PLLFEED = 0xaa;
    PLLFEED = 0x55;
    while((PLLSTAT & (1 << 10)) == 0);
    PLLCON = 3;
    PLLFEED = 0xaa;
    PLLFEED = 0x55;

/* Set memory accelerater module*/
    MAMCR = 0;
#if Fcclk < 20000000
    MAMTIM = 1;
#else
#if Fcclk < 40000000
    MAMTIM = 2;
#else
    MAMTIM = 3;
#endif
#endif
    MAMCR = 2;

/* initialize UART*/
    InitialiseUART0(115200);

/* initialize RTC*/
    CCR = 1;
    PREINT = Fpclk / 32768 - 1;
    PREFRAC = Fpclk - (Fpclk / 32768) * 32768;
    YEAR = 2003;
    MONTH = 6;
    DOM = 2;
/* initialize VIC*/
    VICIntEnClr = 0xffffffff;
    VICVectAddr = 0;
    VICIntSelect = 0;
    T0IR = 0xffffffff;
    T0TCR = 0X02;
}

/*********************************************************************************************************
**                  The implementations for some library functions
**                  For more details, please refer to the ADS compiler handbook and The library 
**					function manual
**                  User could change it as needed       
********************************************************************************************************/

#include "rt_sys.h"
#include "stdio.h"

#pragma import(__use_no_semihosting_swi)
#pragma import(__use_two_region_memory)
 
        int __rt_div0(int a)
{
    a = a;
    return 0;
}

        int fputc(int ch,FILE *f)
{
    ch = ch;
    f = f;
    return 0;
}

    int fgetc(FILE *f)
{
    f = f;
    return 0;
}


        int _sys_close(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

        int _sys_write(FILEHANDLE fh, const unsigned char * buf,
                      unsigned len, int mode)
{
    fh = fh;
    buf = buf;
    len =len;
    mode = mode;
    return 0;
}
        int _sys_read(FILEHANDLE fh, unsigned char * buf,
                     unsigned len, int mode)
{
    fh = fh;
    buf = buf;
    len =len;
    mode = mode;
    
    return 0;
}

       void _ttywrch(int ch)
{
    ch = ch;
}

        int _sys_istty(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}
        int _sys_seek(FILEHANDLE fh, long pos)
{
    fh = fh;
    return 0;
}
        int _sys_ensure(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}

        long _sys_flen(FILEHANDLE fh)
{
    fh = fh;
    return 0;
}
       int _sys_tmpnam(char * name, int sig, unsigned maxlen)
{
    name = name;
    sig = sig;
    maxlen = maxlen;
    return 0;
}

        void _sys_exit(int returncode)
{
    returncode = returncode;
}

        char *_sys_command_string(char * cmd, int len)
{
    cmd = cmd;
    len = len;
    return 0;
}