usbmain.c

2440 开发板的测试程序。包括uart,iic,lcd

/****************************************************************
 NAME: usbmain.c
 DESC: endpoint interrupt handler
	   USB init jobs
 HISTORY:
 Mar.25.2002:purnnamu: ported for S3C2410X.
 Mar.27.2002:purnnamu: DMA is enabled.
 ****************************************************************/
#include <string.h>
#include <stdarg.h>
#include "option.h"
#include "2440addr.h"
#include "2440lib.h"
#include "def.h"

#include "2440usb.h"
#include "usbmain.h"
#include "usblib.h"
#include "usbsetup.h"
#include "usbout.h"
#include "usbin.h"

/**************************
	Some PrepareEp1Fifo() should be deleted
 **************************/   

void UsbdMain( void )
{
	int i;
	U8 tmp1;
	U8 oldTmp1 = 0xff;

	//ChangeUPllValue(0x38,2,1);	// UCLK=96Mhz     
	// ChangeUPllValue(0x38,2,2);	// UCLK=48Mhz     
	InitDescriptorTable();
	//ResetUsbd();

	rGPGCON &= ~( 3 << 18 );	//input, hzh
	rGPGUP |= 1 << 9;		//disable pull-up

	Delay( 2000 );
	rGPGCON |= 1 << 18;		//output
	rGPGDAT |= 1 << 9;		//high    

	ConfigUsbd();

	//DetectVbus(); //not used in S3C2400X

	PrepareEp1Fifo(); 
#if 0    
	while(1)
	{
		if(DbgPrintfLoop())continue;
		
		Delay(5000);
		if((i++%2)==0)Led_Display(0x8);
		else Led_Display(0x0);
	}
#endif    
}


void __irq IsrUsbd( void )
{
	U8 usbdIntpnd, epIntpnd;
	U8 saveIndexReg = rINDEX_REG;
	usbdIntpnd = rUSB_INT_REG;
	epIntpnd = rEP_INT_REG;
	//DbgPrintf( "[INT:EP_I=%x,USBI=%x]",epIntpnd,usbIntpnd );
	//Uart_SendByte('U');

	if ( usbdIntpnd & SUSPEND_INT )
	{
		rUSB_INT_REG = SUSPEND_INT;
		DbgPrintf( "<SUS]" );
	}
	if ( usbdIntpnd & RESUME_INT )
	{
		rUSB_INT_REG = RESUME_INT;
		DbgPrintf( "<RSM]" );
	}
	if ( usbdIntpnd & RESET_INT )
	{
		DbgPrintf( "<RST]" );  

		//ResetUsbd();
		ReconfigUsbd();

		rUSB_INT_REG = RESET_INT;  //RESET_INT should be cleared after ResetUsbd().   	

		PrepareEp1Fifo();
	}

	if ( epIntpnd & EP0_INT )
	{
		rEP_INT_REG = EP0_INT;  
		DbgPrintf( "<EP0]" ); 
		Ep0Handler();
	}
	if ( epIntpnd & EP1_INT )
	{
		rEP_INT_REG = EP1_INT;  
		Ep1Handler();
	}

	if ( epIntpnd & EP2_INT )
	{
		rEP_INT_REG = EP2_INT;  
		DbgPrintf( "<2:TBD]" );   //not implemented yet	
		//Ep2Handler();
	}

	if ( epIntpnd & EP3_INT )
	{
		rEP_INT_REG = EP3_INT;
		Ep3Handler();
	}

	if ( epIntpnd & EP4_INT )
	{
		rEP_INT_REG = EP4_INT;
		DbgPrintf( "<4:TBD]" );   //not implemented yet	
		//Ep4Handler();
	}

	ClearPending( BIT_USBD );	 

	rINDEX_REG = saveIndexReg;
}




/******************* Consol printf for debug *********************/

#define DBGSTR_LENGTH (0x1000)
U8 dbgStrFifo[DBGSTR_LENGTH];
volatile U32 dbgStrRdPt = 0;
volatile U32 dbgStrWrPt = 0;



void _WrDbgStrFifo( U8 c )
{
	dbgStrFifo[dbgStrWrPt++] = c;
	if ( dbgStrWrPt == DBGSTR_LENGTH )
		dbgStrWrPt = 0;
}


int DbgPrintfLoop( void )
{
	if ( dbgStrRdPt == dbgStrWrPt )
		return 0;
	Uart_SendByte( dbgStrFifo[dbgStrRdPt++] );

	if ( dbgStrRdPt == DBGSTR_LENGTH )
		dbgStrRdPt = 0;
	return 1;
}


#if 0
void DbgPrintf(char *fmt,...)
{
	int i,slen;
	va_list ap;
	char string[256];

	va_start(ap,fmt);
	vsprintf(string,fmt,ap);
	
	slen=strlen(string);
	
	for(i=0;i<slen;i++)
		_WrDbgStrFifo(string[i]);
	
	va_end(ap);
}
#else
void DbgPrintf(char *fmt,...)
{
}
#endif