main.c.bak

AVR ATEMG128 触摸屏驱动程序 C语言

					Close_Power();
					goto Pin_4;
				}

			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				{
					Close_Time3();
					goto Pin_14;
				}			
			goto loop5;
//*****************************************
Pin_14:		Disp_Pin(14);
			RxLen = 0;
loop14:		Flag_Rec = OFF;			
			while(Flag_Rec == OFF );			
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				goto Pin_7;
			goto loop14;
//*****************************************
Pin_6:		Disp_Pin(6);
			Flag_Rec = ON;
			//*******Fix_Flow*****
			Return_Point();
			Move_Point(4,22);
			Clear_Data(Point_Kong,8);
			//********
			Return_Point();
			Move_Point(4,37);
			Send_byte(0x25);
			//********
			utoa(Fix_Flow,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(4,22);
			Disp_Date(Point_Date,a);

			//******Fix_Press*****
			Return_Point();
			Move_Point(7,22);//15);
			Clear_Data(Point_Kong,8);
			//*******
			Return_Point();
			Move_Point(7,36);
			Send_byte(0x6d);
			Send_byte(0x54);
			//********
			utoa(Fix_Press,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(7,22);
			Disp_Date(Point_Date,a);
			//*******Fix_Time*****
			Return_Point();
			Move_Point(10,22);//15);
			Clear_Data(Point_Kong,8);
			//**********
			Return_Point();
			Move_Point(10,37);
			Send_byte(0x53);
			//**********
			utoa(Fix_Time,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(10,22);
			Disp_Date(Point_Date,a);
			//**************************
loop6:		Flag_Rec = OFF;
			RxLen = 0;
			while( Flag_Rec == OFF );			
			Asc_Dig();
			//*********SET UP ****FLOW PRESSURE TIME ***
			if((KEY_P6_rateP[0] <= X_Zb) && (X_Zb <= KEY_P6_rateP[2]) && (Y_Zb <=KEY_P6_rateP[1])&&(KEY_P6_rateP[3]<= Y_Zb))
				{
					Key_board( &Fix_Flow);
					goto Pin_6;
				}
			if((KEY_P6_pressP[0] <= X_Zb) && (X_Zb <= KEY_P6_pressP[2]) && (Y_Zb <=KEY_P6_pressP[1])&&(KEY_P6_pressP[3]<= Y_Zb))
				{
					GonGon = Fix_Press;
					Key_board( &Fix_Press);
					if( Fix_18_Press > Fix_Press )
					{
						Fix_Press = GonGon;
						goto Pin_19;
					}
					goto Pin_6;
				}
			if((KEY_P6_timeP[0] <= X_Zb) && (X_Zb <= KEY_P6_timeP[2]) && (Y_Zb <=KEY_P6_timeP[1])&&(KEY_P6_timeP[3]<= Y_Zb))
				{
					Key_board( &Fix_Time);
					goto Pin_6;
				}
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				goto Pin_18;
			goto loop6;
//*****************************************
Pin_zx:		Disp_Pin(6);
			Flag_Rec = OFF;
			RxLen = 0;
			//*******Fix_Flow*****
			Return_Point();
			Move_Point(4,15);
			Clear_Data(Point_Kong,8);
			//********
			Return_Point();
			Move_Point(4,30);
			Send_byte(0x25);
			//********
			utoa(Fix_Flow,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(4,15);
			Disp_Date(Point_Date,a);

			//******Fix_Press*****
			Return_Point();
			Move_Point(7,15);
			Clear_Data(Point_Kong,8);
			//*******
			Return_Point();
			Move_Point(7,29);
			Send_byte(0x6d);
			Send_byte(0x54);
			//********
			utoa(Fix_ZX,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(7,15);
			Disp_Date(Point_Date,a);
			//*******Fix_Time*****
			Return_Point();
			Move_Point(10,15);
			Clear_Data(Point_Kong,8);
			//**********
			Return_Point();
			Move_Point(10,30);
			Send_byte(0x53);
			//**********
			utoa(Fix_Time,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(10,15);
			Disp_Date(Point_Date,a);
			//**************************
loopzx:		while( Flag_Rec == OFF );
			Flag_Rec = OFF;
			RxLen = 0;
			Asc_Dig();
			//*********SET UP ****FLOW PRESSURE TIME ***
			if((KEY_P6_rateP[0] <= X_Zb) && (X_Zb <= KEY_P6_rateP[2]) && (Y_Zb <=KEY_P6_rateP[1])&&(KEY_P6_rateP[3]<= Y_Zb))
				{
					Key_board( &Fix_Flow);
					goto Pin_6;
				}
			if((KEY_P6_pressP[0] <= X_Zb) && (X_Zb <= KEY_P6_pressP[2]) && (Y_Zb <=KEY_P6_pressP[1])&&(KEY_P6_pressP[3]<= Y_Zb))
				{
					Key_board( &Fix_ZX);
					goto Pin_6;
				}
			if((KEY_P6_timeP[0] <= X_Zb) && (X_Zb <= KEY_P6_timeP[2]) && (Y_Zb <=KEY_P6_timeP[1])&&(KEY_P6_timeP[3]<= Y_Zb))
				{
					Key_board( &Fix_Time);
					goto Pin_6;
				}
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				goto Pin_4;
			goto loopzx;
//&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
Pin_7:		Disp_Pin(7);			
			Open_Power();			
			Write_Plump_SetPoint_1();			
			Return_Point();
			Move_Point(7,12);
			Clear_Data(Point_Kong,7);			
			Return_Point();
			Move_Point(7,12);
			Send_byte(0X2A);
			Open_One_Min();
			Flag_Rec = OFF;
			RxLen = 0;
loop7:		if( Flag_ONE == ON)
			{
				Flag_ONE = OFF;
				Close_One_Min();
				Close_Window();
				goto Pin_5_1;
			}
			if( Flag_Rec == OFF )
				goto loop7;			
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				{
					Close_One_Min();
					goto Pin_4;
				}
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				{
					Close_One_Min();
					Close_Window();	
					Write_Plump_SetPoint_1();
					goto Pin_5_1;
				}
			Flag_Rec = OFF;
			RxLen = 0;
			goto loop7;
//*******************************************
Pin_5_1:	Disp_Pin(5);
			Flag_Rec = OFF;
			RxLen = 0;
			Open_Time3();
Brush51:	PRESS_Write(PRESS_TX,6);
			asm("nop");			
			if( Flag_ZD == ON)
			{
				Flag_ZD = OFF;
				Disp_Press(7,12);
				if( Fix_18_Press >= 1000)
				{
					if(WWW <= (Fix_18_Press/1000))
					{
						Close_Time3();
						Write_Flow_Rat();
						Write_Plump_SetPoint();
						goto Pin_8;
					}
				}
				else
				{
					if( (WWW1 !=0) && (WWW1 <= Fix_18_Press))
						{
							Close_Time3();
							Write_Flow_Rat();
							Write_Plump_SetPoint();
							goto Pin_8;
						}
				}
			}			
loop51:		while(Flag_Rec == OFF)	
			{
				if(Flag_Time3 == ON)
					{
						Flag_Time3 = OFF;
						goto Brush51;
					}
			}			
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				{
					Close_Time3();
					goto Pin_4;
				}
			Flag_Rec = OFF;
			RxLen = 0;		
			goto loop51;
//********************************************
Pin_8:		Disp_Pin(8);			
			Buff_Time = Fix_Time;
			Fix_Time = 300;	
			Open_Fix_Second();	
			Flag_Rec = OFF;
			RxLen = 0;
			PRESS_Write(PRESS_TX,6);
			asm("nop");	
			asm("nop");	
			asm("nop");	
			asm("nop");	
			do
			{
					AAA1 = 0;					
				if( DD == 2)
				{			
					DD = 0;				
					if( Flag_ZD == ON)
					{
						Flag_ZD = OFF;
						Disp_Press(10,15);
						Disp_Flow(6,15);
						PRESS_Write(PRESS_TX,6);
						asm("nop");			
					}
					else
					{
						PRESS_Write(PRESS_TX,6);
						asm("nop");
						asm("nop");
						asm("nop");
					}															
				}					
				if(Flag_Rec == ON)
				{
					Asc_Dig();			
						if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
						{
							Close_Fix_Second();	
							Fix_Time = Buff_Time;
							goto Pin_4;
						}
					if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
						{
							Close_Fix_Second();	
							Fix_Time = Buff_Time;
							goto Pin_9;
						}
					Flag_Rec = OFF;
					RxLen = 0;
				}								
			}while(Flag_1S == OFF );
			Close_Fix_Second();	
			Fix_Time = Buff_Time;	
			goto Pin_9;			
//********************************************
Pin_9:		Disp_Pin(9);
			Write_Plum_P();
			Flag_Rec = OFF;
			RxLen = 0;
loop9:      while( Flag_Rec == OFF );			
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				goto Pin_10;
			Flag_Rec = OFF;
			RxLen = 0;
			goto loop9;
//********************************************
Pin_10:		Disp_Pin(10);
			Flag_Rec = ON;
			RxLen = 0;
			uchar k=0;			
			if( Fix_Time <= 20 )
				AAA2 = 2;
			else
				AAA2 = (Fix_Time/9);			
			Return_Point();
			Move_Point(4,20);
			Clear_Data(Point_Kong,7);			
			Return_Point();
			Move_Point(4,20);
			Send_byte(0X2A);
			Open_Fix_Second();	
			PRESS_Write(PRESS_TX,6);
			asm("nop");			
			do
			{
				if( AAA1 == AAA2 )
				{
					AAA1 = 0;
					k++;
					Return_Point();
					Move_Point(4,20+k);
					Send_byte(0X2A);	

				}
				if( DD == 2)
				{			
					DD = 0;				
					if( Flag_ZD == ON)
					{
						Flag_ZD = OFF;
						Disp_Press(10,20);
						Disp_Flow(7,20);
						PRESS_Write(PRESS_TX,6);
						asm("nop");			
					}
					else
					{
						PRESS_Write(PRESS_TX,6);
						asm("nop");
						asm("nop");
						asm("nop");
					}															
				}				
			}while(Flag_1S == OFF );
			Close_Fix_Second();				
			goto Pin_11;			
//****************************************
Pin_11:		Disp_Pin(11);
			Flag_Rec = OFF;
			RxLen = 0;
loop11:		while(Flag_Rec == OFF);			
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				{
					Write_Plump_SetPoint_8();
					Close_Power();					
					Write_Flow_Rat_0();
					goto Pin_12;
				}
			Flag_Rec = OFF;
			RxLen = 0;
			goto loop11;
//*****************************************
Pin_12:		Disp_Pin(12);
			Flag_Rec = OFF;
			RxLen = 0;
			uchar p=0;		
			//**********************
			Return_Point();
			Move_Point(7,12);
			Clear_Data(Point_Kong,7);			
			Return_Point();
			Move_Point(7,12);
			Send_byte(0X2A);
			Buff_Time = Fix_Time;
			Fix_Time = 10;
			Open_Fix_Min();
			do
			{
				if(p<5)
				{
					if( GG == 2)
					{			
						GG = 0;
						Send_byte(0X2A);
						p++;
					}
				}				
				if( Flag_Rec == ON )
				{
					Flag_Rec = OFF;
					RxLen = 0;
					Asc_Dig();
					if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
						{
							Close_Fix_Min();
							Fix_Time = Buff_Time;
							goto Pin_4;
						}
					if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
						{
							Close_Fix_Min();
							Fix_Time = Buff_Time;
							goto Pin_13;
						}
				}
			}while(Flag_1M == OFF );
			Close_Fix_Min();
			Fix_Time = Buff_Time;
			goto Pin_13;

loop12:		while(Flag_Rec == OFF );
			RxLen = 0;
			Flag_Rec = OFF;
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				goto Pin_13;
			goto loop12;
//******************************************
Pin_13:		Disp_Pin(13);
			Flag_Rec = OFF;
			RxLen = 0;
			Open_Window();
			Write_Plump_SetPoint_1();

loop13:		while( Flag_Rec == OFF );			
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				{
					Close_Power();
				}
			Flag_Rec = OFF;
			RxLen = 0;
			goto loop13;
//*******************************************
Pin_18:		Disp_Pin(18);			
			//*******Fix_Flow*****
			Return_Point();
			Move_Point(4,22);
			Clear_Data(Point_Kong,8);
			//********
			Return_Point();
			Move_Point(4,36);
			Send_byte(0x6d);
			Send_byte(0x54);
			//********
			utoa(Fix_18_Press,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(4,22);
			Disp_Date(Point_Date,a);
			//******Fix_Press*****
			Return_Point();
			Move_Point(7,22);
			Clear_Data(Point_Kong,8);
			//*******
			Return_Point();
			Move_Point(7,37);			
			Send_byte(0x25);
			//********
			utoa(Fix_18_P,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(7,22);
			Disp_Date(Point_Date,a);
			//*******Fix_Time*****
			Return_Point();
			Move_Point(10,22);
			Clear_Data(Point_Kong,8);
			//**********
			Return_Point();
			Move_Point(10,37);
			Send_byte(0x25);
			//**********
			utoa(Fix_18_D,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(10,22);
			Disp_Date(Point_Date,a);
			//**************************
			Flag_Rec = OFF;
			RxLen = 0;
loop18:		while( Flag_Rec == OFF );			
			Asc_Dig();
			//*********SET UP ****FLOW PRESSURE TIME ***
			if((KEY_P6_rateP[0] <= X_Zb) && (X_Zb <= KEY_P6_rateP[2]) && (Y_Zb <=KEY_P6_rateP[1])&&(KEY_P6_rateP[3]<= Y_Zb))
				{
					Key_board( &Fix_18_Press);
					if( Fix_18_Press > Fix_Press )
					{
						goto Pin_19;
					}
					goto Pin_6;
				}
			if((KEY_P6_pressP[0] <= X_Zb) && (X_Zb <= KEY_P6_pressP[2]) && (Y_Zb <=KEY_P6_pressP[1])&&(KEY_P6_pressP[3]<= Y_Zb))
				{
					Key_board( &Fix_18_P);
					goto Pin_6;
				}
			if((KEY_P6_timeP[0] <= X_Zb) && (X_Zb <= KEY_P6_timeP[2]) && (Y_Zb <=KEY_P6_timeP[1])&&(KEY_P6_timeP[3]<= Y_Zb))
				{
					Key_board( &Fix_18_D);
					goto Pin_6;
				}
			//**********************************************
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
				goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
				goto Pin_4;
			Flag_Rec = OFF;
			RxLen = 0;
			goto loop18;

//********************************************
Pin_17:		Disp_Pin(17);			
			//******Fix_P*****
			Return_Point();
			Move_Point(6,15);
			Clear_Data(Point_Kong,5);
			utoa(Fix_P,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(6,15);
			Disp_Date(Point_Date,a);
			//*******Fix_D*****
			Return_Point();
			Move_Point(10,15);
			Clear_Data(Point_Kong,5);
			utoa(Fix_D,Point_Date,10);
			a = strnlen(Point_Date,10);
			Return_Point();
			Move_Point(10,15);
			Disp_Date(Point_Date,a);
			//**************************
			Flag_Rec = OFF;
			RxLen = 0;
loop17:		while( Flag_Rec == OFF );			
			Asc_Dig();
			//*********SET UP **** P D  ***
			if((KEY_P17_pP[0] <= X_Zb) && (X_Zb <= KEY_P17_pP[2]) && (Y_Zb <=KEY_P17_pP[1])&&(KEY_P17_pP[3]<= Y_Zb))
				{
					Key_board( &Fix_P);
					goto Pin_17;
				}
			if((KEY_P17_dP[0] <= X_Zb) && (X_Zb <= KEY_P17_dP[2]) && (Y_Zb <=KEY_P17_dP[1])&&(KEY_P17_dP[3]<= Y_Zb))
				{
					Key_board( &Fix_D);
					goto Pin_17;
				}
//**********************************************
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
					goto Pin_4;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
					goto Pin_4;				
			Flag_Rec = OFF;
			RxLen = 0;
			goto loop17;
//********************************************
Pin_19:		Disp_Pin(19);	
				Return_Point();
				Move_Point(7,18);
				Disp_Date(Point_Kong,2);
				Send_byte(0x6d);
				Send_byte(0x54);	
				utoa(Fix_18_Press,Point_Date,10);
				a = strnlen(Point_Date,10);
				Return_Point();
				Move_Point(7,12);
				Disp_Date(Point_Kong,4);
				Return_Point();
				Move_Point(7,12);
				Disp_Date(Point_Date,a);
				Flag_Rec = OFF;
				RxLen = 0;
//**************************
loop19:		while( Flag_Rec == OFF );			
			Asc_Dig();
			if((KEY_LEFT_P[0] <= X_Zb) && (X_Zb <= KEY_LEFT_P[2]) && (Y_Zb <=KEY_LEFT_P[1])&&(KEY_LEFT_P[3]<= Y_Zb))
					goto Pin_6;
			if((KEY_RIGH_P[0] <= X_Zb) && (X_Zb <= KEY_RIGH_P[2]) && (Y_Zb <=KEY_RIGH_P[1])&&(KEY_RIGH_P[3]<= Y_Zb))
					goto Pin_6;	
			RxLen = 0;
			Flag_Rec = OFF;			
			goto loop19;
Power_OFF:	Close_Power();
			while(1);
			return 0;
}