at91sam7x-ek.ewp

This application creates an USB Mass Storage drive on a host computer. The drive is created from the

        </option>
      </data>
    </settings>
    <settings>
      <name>OBJCOPY</name>
      <archiveVersion>0</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>OOCOutputFormat</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>OCOutputOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>OOCOutputFile</name>
          <state>at91sam7x128_at91sam7x128_flash.srec</state>
        </option>
        <option>
          <name>OOCCommandLineProducer</name>
          <state>1</state>
        </option>
        <option>
          <name>OOCObjCopyEnable</name>
          <state>0</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>CUSTOM</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <extensions></extensions>
        <cmdline></cmdline>
      </data>
    </settings>
    <settings>
      <name>BICOMP</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
    <settings>
      <name>BUILDACTION</name>
      <archiveVersion>1</archiveVersion>
      <data>
        <prebuild></prebuild>
        <postbuild>objcopy -O binary "$TARGET_BPATH$.out" "$TARGET_BPATH$.bin"</postbuild>
      </data>
    </settings>
    <settings>
      <name>ILINK</name>
      <archiveVersion>0</archiveVersion>
      <data>
        <version>1</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IlinkLibIOConfig</name>
          <state>1</state>
        </option>
        <option>
          <name>XLinkMisraHandler</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkInputFileSlave</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkOutputFile</name>
          <state>at91sam7x128_flash.out</state>
        </option>
        <option>
          <name>IlinkDebugInfoEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkKeepSymbols</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryFile</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySymbol</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinarySegment</name>
          <state></state>
        </option>
        <option>
          <name>IlinkRawBinaryAlign</name>
          <state></state>
        </option>
        <option>
          <name>IlinkDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkConfigDefines</name>
          <state></state>
        </option>
        <option>
          <name>IlinkMapFile</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkLogFile</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogInitialization</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogModule</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogSection</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkLogVeneer</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkIcfOverride</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkIcfFile</name>
          <state>$PROJ_DIR$\..\..\..\at91lib\boards\at91sam7x-ek\at91sam7x128\flash.icf</state>
        </option>
        <option>
          <name>IlinkIcfFileSlave</name>
          <state></state>
        </option>
        <option>
          <name>IlinkEnableRemarks</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkSuppressDiags</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsRem</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsWarn</name>
          <state></state>
        </option>
        <option>
          <name>IlinkTreatAsErr</name>
          <state></state>
        </option>
        <option>
          <name>IlinkWarningsAreErrors</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkUseExtraOptions</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>IlinkLowLevelInterfaceSlave</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkAutoLibEnable</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkAdditionalLibs</name>
          <state></state>
        </option>
        <option>
          <name>IlinkOverrideProgramEntryLabel</name>
          <state>1</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabelSelect</name>
          <state>0</state>
        </option>
        <option>
          <name>IlinkProgramEntryLabel</name>
          <state>resetHandler</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>IARCHIVE</name>
      <archiveVersion>0</archiveVersion>
      <data>
        <version>0</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>IarchiveInputs</name>
          <state></state>
        </option>
        <option>
          <name>IarchiveOverride</name>
          <state>0</state>
        </option>
        <option>
          <name>IarchiveOutput</name>
          <state>###Unitialized###</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>BILINK</name>
      <archiveVersion>0</archiveVersion>
      <data/>
    </settings>
  </configuration>
  <configuration>
    <name>at91sam7x128_sram</name>
    <toolchain>
      <name>ARM</name>
    </toolchain>
    <debug>1</debug>
    <settings>
      <name>General</name>
      <archiveVersion>3</archiveVersion>
      <data>
        <version>12</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>ExePath</name>
          <state>at91sam7x128_sram\Exe</state>
        </option>
        <option>
          <name>ObjPath</name>
          <state>at91sam7x128_sram\Obj</state>
        </option>
        <option>
          <name>ListPath</name>
          <state>at91sam7x128_sram\List</state>
        </option>
        <option>
          <name>Variant</name>
          <version>5</version>
          <state>0</state>
        </option>
        <option>
          <name>GEndianMode</name>
          <state>0</state>
        </option>
        <option>
          <name>Input variant</name>
          <version>1</version>
          <state>3</state>
        </option>
        <option>
          <name>Input description</name>
          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
        </option>
        <option>
          <name>Output variant</name>
          <version>0</version>
          <state>2</state>
        </option>
        <option>
          <name>Output description</name>
          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
        </option>
        <option>
          <name>GOutputBinary</name>
          <state>0</state>
        </option>
        <option>
          <name>FPU</name>
          <version>0</version>
          <state>0</state>
        </option>
        <option>
          <name>OGCoreOrChip</name>
          <state>1</state>
        </option>
        <option>
          <name>GRuntimeLibSelect</name>
          <version>0</version>
          <state>2</state>
        </option>
        <option>
          <name>GRuntimeLibSelectSlave</name>
          <version>0</version>
          <state>2</state>
        </option>
        <option>
          <name>RTDescription</name>
          <state>Use the full configuration of the C/C++ runtime library. Full locale interface, C locale, file descriptor support, multibytes in printf and scanf, and hex floats in strtod.</state>
        </option>
        <option>
          <name>RTConfigPath</name>
          <state>$TOOLKIT_DIR$\INC\DLib_Config_Full.h</state>
        </option>
        <option>
          <name>OGProductVersion</name>
          <state>4.30A</state>
        </option>
        <option>
          <name>OGLastSavedByProductVersion</name>
          <state>5.10.0.213</state>
        </option>
        <option>
          <name>GeneralMisraRules</name>
          <version>0</version>
          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
        </option>
        <option>
          <name>GeneralEnableMisra</name>
          <state>0</state>
        </option>
        <option>
          <name>GeneralMisraVerbose</name>
          <state>0</state>
        </option>
        <option>
          <name>OGChipSelectEditMenu</name>
          <state>at91sam7x128	Atmel at91sam7x128</state>
        </option>
        <option>
          <name>GenLowLevelInterface</name>
          <state>1</state>
        </option>
      </data>
    </settings>
    <settings>
      <name>ICCARM</name>
      <archiveVersion>2</archiveVersion>
      <data>
        <version>19</version>
        <wantNonLocal>1</wantNonLocal>
        <debug>1</debug>
        <option>
          <name>CCDefines</name>
          <state>at91sam7x128</state>
        </option>
        <option>
          <name>CCPreprocFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocComments</name>
          <state>0</state>
        </option>
        <option>
          <name>CCPreprocLine</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListCFile</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMnemonics</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListCMessages</name>
          <state>1</state>
        </option>
        <option>
          <name>CCListAssFile</name>
          <state>0</state>
        </option>
        <option>
          <name>CCListAssSource</name>
          <state>0</state>
        </option>
        <option>
          <name>CCEnableRemarks</name>
          <state>1</state>
        </option>
        <option>
          <name>CCDiagSuppress</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagRemark</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagWarning</name>
          <state></state>
        </option>
        <option>
          <name>CCDiagError</name>
          <state></state>
        </option>
        <option>
          <name>CCObjPrefix</name>
          <state>1</state>
        </option>
        <option>
          <name>CCAllowList</name>
          <version>1</version>
          <state>0000000</state>
        </option>
        <option>
          <name>CCDebugInfo</name>
          <state>1</state>
        </option>
        <option>
          <name>IEndianMode</name>
          <state>1</state>
        </option>
        <option>
          <name>IProcessor</name>
          <state>1</state>
        </option>
        <option>
          <name>IExtraOptionsCheck</name>
          <state>0</state>
        </option>
        <option>
          <name>IExtraOptions</name>
          <state></state>
        </option>
        <option>
          <name>CCLangConformance</name>
          <state>0</state>
        </option>
        <option>
          <name>CCSignedPlainChar</name>
          <state>1</state>
        </option>
        <option>
          <name>CCRequirePrototypes</name>
          <state>0</state>
        </option>
        <option>
          <name>CCMultibyteSupport</name>
          <state>0</state>
        </option>
        <option>
          <name>CCDiagWarnAreErr</name>
          <state>0</state>
        </option>
        <option>
          <name>CCCompilerRuntimeInfo</name>
          <state>0</state>
        </option>
        <option>
          <name>IFpuProcessor</name>
          <state>1</state>
        </option>
        <option>
          <name>OutputFile</name>
          <state>$FILE_BNAME$.o</state>
        </option>
        <option>
          <name>CCLangSelect</name>