⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 vfieeefp.h

📁 KPIT GNU Tools is a set of GNU development tools for Renesas microcontrollers.
💻 H
字号:
/**************************************************************** * * The author of this software is David M. Gay. * * Copyright (c) 1991 by AT&T. * * Permission to use, copy, modify, and distribute this software for any * purpose without fee is hereby granted, provided that this entire notice * is included in all copies of any software which is or includes a copy * or modification of this software and in all copies of the supporting * documentation for such software. * * THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED * WARRANTY.  IN PARTICULAR, NEITHER THE AUTHOR NOR AT&T MAKES ANY * REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY * OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE. * ***************************************************************//* Please send bug reports to	David M. Gay	AT&T Bell Laboratories, Room 2C-463	600 Mountain Avenue	Murray Hill, NJ 07974-2070	U.S.A.	dmg@research.att.com or research!dmg *//* This header file is a modification of mprec.h that only contains floating   point union code. */#include <newlib.h>#include <ieeefp.h>#include <math.h>#include <float.h>#include <errno.h>#include <sys/config.h>#ifdef __IEEE_LITTLE_ENDIAN#define IEEE_8087#endif#ifdef __IEEE_BIG_ENDIAN#define IEEE_MC68k#endif#ifdef __Z8000__#define Just_16#endif#ifdef Unsigned_Shifts#define Sign_Extend(a,b) if (b < 0) a |= (__uint32_t)0xffff0000;#else#define Sign_Extend(a,b) /*no-op*/#endif#if defined(IEEE_8087) + defined(IEEE_MC68k) + defined(VAX) + defined(IBM) != 1Exactly one of IEEE_8087, IEEE_MC68k, VAX, or IBM should be defined.#endif#ifdef _WANT_IO_LONG_DOUBLE/* If we are going to examine or modify specific bits in a long double using   the lword0 or lwordx macros, then we must wrap the long double inside   a union.  This is necessary to avoid undefined behavior according to   the ANSI C spec.  */#ifdef IEEE_8087#if LDBL_MANT_DIG == 24struct ldieee{  unsigned manh:23;  unsigned exp:8;  unsigned sign:1;};#elif LDBL_MANT_DIG == 53struct ldieee{  unsigned manl:20;  unsigned manh:32;  unsigned exp:11;  unsigned sign:1;};#elif LDBL_MANT_DIG == 64struct ldieee{  unsigned manl:32;  unsigned manh:32;  unsigned exp:15;  unsigned sign:1;};#elif LDBL_MANT_DIG > 64struct ldieee{  unsigned manl3:16;  unsigned manl2:32;  unsigned manl:32;  unsigned manh:32;  unsigned exp:15;  unsigned sign:1;};#endif /* LDBL_MANT_DIG */#else  /* !IEEE_8087 */#if LDBL_MANT_DIG == 24struct ldieee{  unsigned sign:1;  unsigned exp:8;  unsigned manh:23;};#elif LDBL_MANT_DIG == 53struct ldieee{  unsigned sign:1;  unsigned exp:11;  unsigned manh:32;  unsigned manl:20;};#elif LDBL_MANT_DIG == 64struct ldieee{  unsigned sign:1;  unsigned exp:15;  unsigned manh:32;  unsigned manl:32;};#elif LDBL_MANT_DIG > 64struct ldieee{  unsigned sign:1;  unsigned exp:15;  unsigned manh:32;  unsigned manl:32;  unsigned manl2:32;  unsigned manl3;16;};#endif /* LDBL_MANT_DIG */#endif /* !IEEE_8087 */#endif /* _WANT_IO_LONG_DOUBLE *//* If we are going to examine or modify specific bits in a double using   the word0 and/or word1 macros, then we must wrap the double inside   a union.  This is necessary to avoid undefined behavior according to   the ANSI C spec.  */union double_union{  double d;  __uint32_t i[2];};#ifdef IEEE_8087#define word0(x) (x.i[1])#define word1(x) (x.i[0])#else#define word0(x) (x.i[0])#define word1(x) (x.i[1])#endif/* #define P DBL_MANT_DIG *//* Ten_pmax = floor(P*log(2)/log(5)) *//* Bletch = (highest power of 2 < DBL_MAX_10_EXP) / 16 *//* Quick_max = floor((P-1)*log(FLT_RADIX)/log(10) - 1) *//* Int_max = floor(P*log(FLT_RADIX)/log(10) - 1) */#if defined(IEEE_8087) + defined(IEEE_MC68k)#if defined (_DOUBLE_IS_32BITS) #define Exp_shift   23#define Exp_shift1  23#define Exp_msk1    ((__uint32_t)0x00800000L)#define Exp_msk11   ((__uint32_t)0x00800000L)#define Exp_mask    ((__uint32_t)0x7f800000L)#define P    	    24#define Bias 	    127#if 0#define IEEE_Arith  /* it is, but the code doesn't handle IEEE singles yet */#endif#define Emin        (-126)#define Exp_1       ((__uint32_t)0x3f800000L)#define Exp_11      ((__uint32_t)0x3f800000L)#define Ebits 	    8#define Frac_mask   ((__uint32_t)0x007fffffL)#define Frac_mask1  ((__uint32_t)0x007fffffL)#define Ten_pmax    10#define Sign_bit    ((__uint32_t)0x80000000L)#define Ten_pmax    10#define Bletch	    2#define Bndry_mask  ((__uint32_t)0x007fffffL)#define Bndry_mask1 ((__uint32_t)0x007fffffL)#define LSB 1#define Sign_bit    ((__uint32_t)0x80000000L)#define Log2P 	    1#define Tiny0 	    0#define Tiny1 	    1#define Quick_max   5#define Int_max     6#define Infinite(x) (word0(x) == ((__uint32_t)0x7f800000L))#undef word0#undef word1#define word0(x) (x.i[0])#define word1(x) 0#else#define Exp_shift  20#define Exp_shift1 20#define Exp_msk1    ((__uint32_t)0x100000L)#define Exp_msk11   ((__uint32_t)0x100000L)#define Exp_mask  ((__uint32_t)0x7ff00000L)#define P 53#define Bias 1023#define IEEE_Arith#define Emin (-1022)#define Exp_1  ((__uint32_t)0x3ff00000L)#define Exp_11 ((__uint32_t)0x3ff00000L)#define Ebits 11#define Frac_mask  ((__uint32_t)0xfffffL)#define Frac_mask1 ((__uint32_t)0xfffffL)#define Ten_pmax 22#define Bletch 0x10#define Bndry_mask  ((__uint32_t)0xfffffL)#define Bndry_mask1 ((__uint32_t)0xfffffL)#define LSB 1#define Sign_bit ((__uint32_t)0x80000000L)#define Log2P 1#define Tiny0 0#define Tiny1 1#define Quick_max 14#define Int_max 14#define Infinite(x) (word0(x) == ((__uint32_t)0x7ff00000L)) /* sufficient test for here */#endif#else#undef  Sudden_Underflow#define Sudden_Underflow#ifdef IBM#define Exp_shift  24#define Exp_shift1 24#define Exp_msk1   ((__uint32_t)0x1000000L)#define Exp_msk11  ((__uint32_t)0x1000000L)#define Exp_mask  ((__uint32_t)0x7f000000L)#define P 14#define Bias 65#define Exp_1  ((__uint32_t)0x41000000L)#define Exp_11 ((__uint32_t)0x41000000L)#define Ebits 8	/* exponent has 7 bits, but 8 is the right value in b2d */#define Frac_mask  ((__uint32_t)0xffffffL)#define Frac_mask1 ((__uint32_t)0xffffffL)#define Bletch 4#define Ten_pmax 22#define Bndry_mask  ((__uint32_t)0xefffffL)#define Bndry_mask1 ((__uint32_t)0xffffffL)#define LSB 1#define Sign_bit ((__uint32_t)0x80000000L)#define Log2P 4#define Tiny0 ((__uint32_t)0x100000L)#define Tiny1 0#define Quick_max 14#define Int_max 15#else /* VAX */#define Exp_shift  23#define Exp_shift1 7#define Exp_msk1    0x80#define Exp_msk11   ((__uint32_t)0x800000L)#define Exp_mask  ((__uint32_t)0x7f80L)#define P 56#define Bias 129#define Exp_1  ((__uint32_t)0x40800000L)#define Exp_11 ((__uint32_t)0x4080L)#define Ebits 8#define Frac_mask  ((__uint32_t)0x7fffffL)#define Frac_mask1 ((__uint32_t)0xffff007fL)#define Ten_pmax 24#define Bletch 2#define Bndry_mask  ((__uint32_t)0xffff007fL)#define Bndry_mask1 ((__uint32_t)0xffff007fL)#define LSB ((__uint32_t)0x10000L)#define Sign_bit ((__uint32_t)0x8000L)#define Log2P 1#define Tiny0 0x80#define Tiny1 0#define Quick_max 15#define Int_max 15#endif#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -