makefile

该软件根据网络数据生成NetFlow记录。NetFlow可用于网络规划、负载均衡、安全监控等

# File: drivers/sk98lin/Makefile
#
# Makefile for the SysKonnect SK-98xx device driver.
#

#
# Standalone driver params
# SKPARAM += -DSK_KERNEL_24
# SKPARAM += -DSK_KERNEL_24_26
# SKPARAM += -DSK_KERNEL_26
# SKPARAM += -DSK_KERNEL_22_24

# DBGDEF =  \
# -DDEBUG

ifdef DEBUG
DBGDEF +=  \
-DSK_DEBUG_CHKMOD=0x00010006L \
-DSK_DEBUG_CHKCAT=0x00FFFFFFL
endif


# **** possible debug modules for SK_DEBUG_CHKMOD *****************
# SK_DBGMOD_MERR        0x00000001L     /* general module error indication */
# SK_DBGMOD_HWM         0x00000002L     /* Hardware init module */
# SK_DBGMOD_RLMT        0x00000004L     /* RLMT module */
# SK_DBGMOD_VPD         0x00000008L     /* VPD module */
# SK_DBGMOD_I2C         0x00000010L     /* I2C module */
# SK_DBGMOD_PNMI        0x00000020L     /* PNMI module */
# SK_DBGMOD_CSUM        0x00000040L     /* CSUM module */
# SK_DBGMOD_ADDR        0x00000080L     /* ADDR module */
# SK_DBGMOD_DRV         0x00010000L     /* DRV module */

# **** possible debug categories for SK_DEBUG_CHKCAT **************
# *** common modules ***
# SK_DBGCAT_INIT        0x00000001L     module/driver initialization
# SK_DBGCAT_CTRL        0x00000002L     controlling: add/rmv MCA/MAC and other controls (IOCTL)
# SK_DBGCAT_ERR         0x00000004L     error handling paths
# SK_DBGCAT_TX          0x00000008L     transmit path
# SK_DBGCAT_RX          0x00000010L     receive path
# SK_DBGCAT_IRQ         0x00000020L     general IRQ handling
# SK_DBGCAT_QUEUE       0x00000040L     any queue management
# SK_DBGCAT_DUMP        0x00000080L     large data output e.g. hex dump
# SK_DBGCAT_FATAL       0x00000100L     large data output e.g. hex dump

# *** driver (file skge.c) ***
# SK_DBGCAT_DRV_ENTRY           0x00010000      entry points
# SK_DBGCAT_DRV_???             0x00020000      not used
# SK_DBGCAT_DRV_MCA             0x00040000      multicast
# SK_DBGCAT_DRV_TX_PROGRESS     0x00080000      tx path
# SK_DBGCAT_DRV_RX_PROGRESS     0x00100000      rx path
# SK_DBGCAT_DRV_PROGRESS        0x00200000      general runtime
# SK_DBGCAT_DRV_???             0x00400000      not used
# SK_DBGCAT_DRV_PROM            0x00800000      promiscuous mode
# SK_DBGCAT_DRV_TX_FRAME        0x01000000      display tx frames
# SK_DBGCAT_DRV_ERROR           0x02000000      error conditions
# SK_DBGCAT_DRV_INT_SRC         0x04000000      interrupts sources
# SK_DBGCAT_DRV_EVENT           0x08000000      driver events

CONFIG_DEF = -DCAM_CONFIG -DGENESIS -DYUKON -DSK_USE_CSUM

SRCS := skge.c skaddr.c skgehwt.c skgeinit.c skgepnmi.c skgesirq.c \
	ski2c.c sklm80.c skqueue.c skrlmt.c sktimer.c skvpd.c \
	skxmac2.c skproc.c skcsum.c skdim.c skgemib.c

OBJS := skcsum.o skge.o skaddr.o skgehwt.o skgeinit.o skgepnmi.o skgesirq.o \
	ski2c.o sklm80.o skqueue.o skrlmt.o sktimer.o skvpd.o \
	skxmac2.o skproc.o skdim.o

KCC       = gcc -pipe
KCCFLAGS  = -D__KERNEL__ -I../linux/include -I. -DMODULE -nostdinc
KCCFLAGS += -iwithprefix include -DKBUILD_BASENAME=$(subst .c,,$<)
KCCFLAGS += -Wall -Wstrict-prototypes -Wno-trigraphs
KCCFLAGS += -O2 -fno-strict-aliasing -fno-common -fomit-frame-pointer
KCCFLAGS += -mpreferred-stack-boundary=2 -march=i686
ifeq ($(LINUXVER), 2.4)
TARGETS   = sk98lin.o
KCCFLAGS += -DMODVERSIONS -include ../linux/include/linux/modversions.h
else
TARGETS   = sk98lin.ko
KCCFLAGS += -I../linux/include/asm-i386/mach-generic -I../linux/include/asm-i386/mach-default -msoft-float -mregparm=3 -DKBUILD_MODNAME=nprobe
endif

all: $(TARGETS)

sk98lin.o: $(OBJS)
	ld -r -o $@ $(OBJS)

.c.o:
	$(KCC) $(KCCFLAGS) -c $(CONFIG_DEF) -o $@ $<

clean:
	rm -f core *.o *.a *.s


sk98lin.ko: sk98lin.o sk98lin.mod.o
	ld -m elf_i386 -r -o $@ sk98lin.o sk98lin.mod.o

 
depend:
	makedepend -DSK_USE_CSUM -I. -I.././linux/include -I.. $(SRCS)
 
# DO NOT DELETE THIS LINE -- make depend depends on it.