24count.fit

在Maxplus软件平台开发的

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 02/27/2003 11:18:02      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "24count"
BEGIN

    DEVICE = "EPF10K20TI144-4";

    "CLK"                          : INPUT_PIN  = 55     ;
    "/CLR"                         : INPUT_PIN  = 54     ;
    "AD0"                          : OUTPUT_PIN = 81     ;
    "AD1"                          : OUTPUT_PIN = 30     ;
    "AD2"                          : OUTPUT_PIN = 78     ;
    "AD3"                          : OUTPUT_PIN = 79     ;
    "AD5"                          : OUTPUT_PIN = 33     ;
    "/C"                           : OUTPUT_PIN = 31     ;
    ":46"                          : LOCATION   = LC2_F18;
    "~46~1"                        : LOCATION   = LC8_F18;
    "|74161:19|f74161:sub|:9"      : LOCATION   = LC4_F18;  -- |74161:19|f74161:sub|QA
    "|74161:19|f74161:sub|:84"     : LOCATION   = LC5_F18;
    "|74161:19|f74161:sub|:87"     : LOCATION   = LC1_F18;  -- |74161:19|f74161:sub|QB
    "|74161:19|f74161:sub|:99"     : LOCATION   = LC7_F18;  -- |74161:19|f74161:sub|QC
    "|74161:19|f74161:sub|:110"    : LOCATION   = LC3_F18;  -- |74161:19|f74161:sub|QD
    "|74161:20|f74161:sub|:9"      : LOCATION   = LC6_F18;  -- |74161:20|f74161:sub|QA

END;

INTERNAL_INFO "24count"
BEGIN
	DEVICE = EPF10K20TI144-4;
    OD5P55  : LORAX = "1:FB5->LC4_F18,->LC1_F18,->LC7_F18,->LC3_F18,->LC6_F18|";
    OD2P54  : LORAX = "1:FB2->LC4_F18,->LC1_F18,->LC7_F18,->LC3_F18,->LC6_F18|";
    LC2_F18 : LORAX = "1:MSW2R5C16,HHR0R5->OH2R5P31|";
    LC4_F18 : LORAX = "1:MSW0R5C16,G41R5->OH8R5P81|";
    LC1_F18 : LORAX = "1:MSW1R5C16,HHR5R5->OH1R5P30|";
    LC7_F18 : LORAX = "1:MSW6R5C17,G49R5->OH14R5P78|";
    LC3_F18 : LORAX = "1:MSW3R5C16,G26R5->OH11R5P79|";
    LC6_F18 : LORAX = "1:MSW5R5C17,HHR39R5->OH5R5P33|";
	LC8_F18 : LORAX2 = "X, LC6_F18, LC7_F18, LC1_F18";
	LC2_F18 : LORAX2 = "X, LC3_F18, LC4_F18, LC8_F18";
	LC4_F18 : LORAX2 = "X, X, X, LC4_F18";
	LC5_F18 : LORAX2 = "X, X, LC4_F18, LC1_F18";
	LC1_F18 : LORAX2 = "X, X, LC4_F18, LC1_F18";
	LC7_F18 : LORAX2 = "X, X, LC5_F18, LC7_F18";
	LC3_F18 : LORAX2 = "X, LC5_F18, LC3_F18, LC7_F18";
	LC6_F18 : LORAX2 = "LC5_F18, LC3_F18, LC6_F18, LC7_F18";
END;