tran.fit

在Maxplus软件平台开发的

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 02/17/2003 15:14:14      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "tran"
BEGIN

    DEVICE = "EPF10K20TC144-3";

    "CLK"                          : INPUT_PIN  = 55     ;
    "/CLR"                         : INPUT_PIN  = 54     ;
    "D0"                           : INPUT_PIN  = 130    ;
    "D1"                           : INPUT_PIN  = 131    ;
    "D2"                           : INPUT_PIN  = 132    ;
    "D3"                           : INPUT_PIN  = 133    ;
    "D4"                           : INPUT_PIN  = 135    ;
    "D5"                           : INPUT_PIN  = 136    ;
    "D6"                           : INPUT_PIN  = 137    ;
    "D7"                           : INPUT_PIN  = 138    ;
    "/WR"                          : INPUT_PIN  = 117    ;
    "C"                            : OUTPUT_PIN = 79     ;
    "FD0"                          : OUTPUT_PIN = 80     ;
    "FD1"                          : OUTPUT_PIN = 82     ;
    "FD2"                          : OUTPUT_PIN = 86     ;
    "FD3"                          : OUTPUT_PIN = 88     ;
    "|fec:2|fec-1:18|8and:22|:38"  : LOCATION   = LC8_E23;  -- |fec:2|fec-1:18|8and:22|OUT
    "|fec:2|fec-1:18|8and:22|~38~1" : LOCATION   = LC5_E23;  -- |fec:2|fec-1:18|8and:22|OUT~1
    "|fec:2|fec-1:18|8and:23|:38"  : LOCATION   = LC2_E23;  -- |fec:2|fec-1:18|8and:23|OUT
    "|fec:2|fec-1:18|8and:23|~38~1" : LOCATION   = LC1_E23;  -- |fec:2|fec-1:18|8and:23|OUT~1
    "|fec:2|fec-1:18|8and:24|:38"  : LOCATION   = LC3_E23;  -- |fec:2|fec-1:18|8and:24|OUT
    "|fec:2|fec-1:18|8and:24|~38~1" : LOCATION   = LC6_E23;  -- |fec:2|fec-1:18|8and:24|OUT~1
    "|fec:2|fec-1:18|8and:25|:38"  : LOCATION   = LC4_E23;  -- |fec:2|fec-1:18|8and:25|OUT
    "|fec:2|fec-1:18|8and:25|~38~1" : LOCATION   = LC7_E23;  -- |fec:2|fec-1:18|8and:25|OUT~1
    "|74161ca2:183|:13"            : LOCATION   = LC4_F11;  -- |74161ca2:183|c_clk
    "|74161ca2:183|74161ca:1|:1"   : LOCATION   = LC6_F11;  -- |74161ca2:183|74161ca:1|C
    "|74161ca2:183|74161ca:1|74161:9|f74161:sub|:9" : LOCATION   = LC2_F11;  -- |74161ca2:183|74161ca:1|74161:9|f74161:sub|QA
    "|74161ca2:183|74161ca:1|74161:9|f74161:sub|:87" : LOCATION   = LC1_F11;  -- |74161ca2:183|74161ca:1|74161:9|f74161:sub|QB
    "|74161ca2:183|74161ca:1|74161:9|f74161:sub|:99" : LOCATION   = LC3_F11;  -- |74161ca2:183|74161ca:1|74161:9|f74161:sub|QC
    "|74161ca2:183|74161ca:1|74161:9|f74161:sub|:110" : LOCATION   = LC5_F11;  -- |74161ca2:183|74161ca:1|74161:9|f74161:sub|QD

END;

INTERNAL_INFO "tran"
BEGIN
	DEVICE = EPF10K20TC144-3;
    OD5P55  : LORAX = "1:FB5->LC4_F11|";
    OD2P54  : LORAX = "1:FB2->LC4_F11,->LC6_F11,->LC2_F11,->LC1_F11,->LC3_F11,->LC5_F11|";
    OV0C14P130 : LORAX = "1:V1C14,G40R4,PA19R4C22->LC1_E23,->LC6_E23|";
    OV1C15P131 : LORAX = "1:V8C15,HHR14R4,PA1R4C22->LC5_E23,->LC6_E23|";
    OV0C15P132 : LORAX = "1:V1C15,HHR19R4,PA17R4C22->LC1_E23,->LC7_E23|";
    OV1C17P133 : LORAX = "1:V8C17,HHR15R4,PA0R4C22->LC5_E23,->LC7_E23|";
    OV0C18P135 : LORAX = "1:V1C18,HHR22R4,PA2R4C22->LC5_E23,->LC1_E23,->LC6_E23|";
    OV1C19P136 : LORAX = "1:V8C19,HHR4R4,PA18R4C22->LC8_E23,->LC2_E23,->LC4_E23|";
    OV0C19P137 : LORAX = "1:V1C19,HHR23R4,PA11R4C22->LC2_E23,->LC3_E23,->LC7_E23|";
    OV0C20P138 : LORAX = "1:V1C20,HHR21R4,PA15R4C22->LC8_E23,->LC3_E23,->LC4_E23|";
    LC8_E23 : LORAX = "1:MSW7R4C22,G80R4->OH15R4P82|";
    LC2_E23 : LORAX = "1:MSW1R4C23,V5C23,G20R5->OH9R5P80|";
    LC3_E23 : LORAX = "1:MSW2R4C22,G10R4->OH10R4P86|";
    LC4_E23 : LORAX = "1:MSW3R4C22,V11C22,G31R3->OH11R3P88|";
    OV0C4P117 : LORAX = "1:V1C4,HHL18R5,PA18R5C10->LC6_F11,->LC2_F11,->LC1_F11,->LC3_F11,->LC5_F11|";
    LC4_F11 : LORAX = "1:MSW3R5C10,HHL7R5->OH11R5P79|";
	LC5_E23 : LORAX2 = "X, OV1C15P131, OV1C17P133, OV0C18P135";
	LC8_E23 : LORAX2 = "X, OV0C20P138, OV1C19P136, LC5_E23";
	LC1_E23 : LORAX2 = "X, OV0C14P130, OV0C15P132, OV0C18P135";
	LC2_E23 : LORAX2 = "X, OV1C19P136, LC1_E23, OV0C19P137";
	LC6_E23 : LORAX2 = "X, OV0C14P130, OV1C15P131, OV0C18P135";
	LC3_E23 : LORAX2 = "X, OV0C20P138, OV0C19P137, LC6_E23";
	LC7_E23 : LORAX2 = "X, OV0C15P132, OV1C17P133, OV0C19P137";
	LC4_E23 : LORAX2 = "X, OV0C20P138, OV1C19P136, LC7_E23";
	LC4_F11 : LORAX2 = "X, X, X, LC6_F11";
	LC6_F11 : LORAX2 = "LC5_F11, LC3_F11, LC2_F11, LC1_F11";
	LC2_F11 : LORAX2 = "X, X, X, LC2_F11";
	LC1_F11 : LORAX2 = "X, X, LC1_F11, LC2_F11";
	LC3_F11 : LORAX2 = "X, LC3_F11, LC1_F11, LC2_F11";
	LC5_F11 : LORAX2 = "LC5_F11, LC3_F11, LC2_F11, LC1_F11";
END;