i2c_to_gpio.fit.qmsg

I2C to GPIO Port expander的Verilog HDL 程序原码

{ "Info" "IFYGR_FYGR_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_START_LUT_PACKING" "" "Extra Info: Moving registers into LUTs to improve timing and density" {  } {  } 1 0 "Moving registers into LUTs to improve timing and density" 1 0 "" 0}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_HEADER" "" "Info: Started processing fast register assignments" {  } {  } 0 0 "Started processing fast register assignments" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_NO_REGS_IN_IOS_FOOTER" "" "Info: Finished processing fast register assignments" {  } {  } 0 0 "Finished processing fast register assignments" 0 0 "" 0}
{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Extra Info: Finished moving registers into LUTs: elapsed time is 00:00:00" {  } {  } 1 0 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0 "" 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.928 ns register pin " "Info: Estimated most critical path is register to pin delay of 2.928 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns GPIO_output\[7\]~reg0 1 REG LAB_X3_Y3 2 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X3_Y3; Fanout = 2; REG Node = 'GPIO_output\[7\]~reg0'" {  } { { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { GPIO_output[7]~reg0 } "NODE_NAME" } } { "I2C_to_GPIO.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN494/quartus/I2C_to_GPIO.v" 96 0 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(1.474 ns) + CELL(1.454 ns) 2.928 ns GPIO_output\[7\] 2 PIN PIN_76 0 " "Info: 2: + IC(1.474 ns) + CELL(1.454 ns) = 2.928 ns; Loc. = PIN_76; Fanout = 0; PIN Node = 'GPIO_output\[7\]'" {  } { { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "2.928 ns" { GPIO_output[7]~reg0 GPIO_output[7] } "NODE_NAME" } } { "I2C_to_GPIO.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN494/quartus/I2C_to_GPIO.v" 96 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "1.454 ns ( 49.66 % ) " "Info: Total cell delay = 1.454 ns ( 49.66 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0} { "Info" "ITDB_TOTAL_IC_DELAY" "1.474 ns ( 50.34 % ) " "Info: Total interconnect delay = 1.474 ns ( 50.34 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0}  } { { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "2.928 ns" { GPIO_output[7]~reg0 GPIO_output[7] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "7 " "Info: Average interconnect usage is 7% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "7 X0_Y0 X8_Y5 " "Info: Peak interconnect usage is 7% of the available device resources in the region that extends from location X0_Y0 to location X8_Y5" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IFIOMGR_ALL_OUTPUT_ENABLE_GROUPS" "" "Info: Following groups of pins have the same output enable" { { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP" "sda_out~en " "Info: Following pins have the same output enable: sda_out~en" { { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional sda 3.3-V LVTTL " "Info: Type bidirectional pin sda uses the 3.3-V LVTTL I/O standard" {  } { { "c:/altera/72_cc/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/72_cc/quartus/bin/pin_planner.ppl" { sda } } } { "c:/altera/72_cc/quartus/bin/Assignment Editor.qase" "" { Assignment "c:/altera/72_cc/quartus/bin/Assignment Editor.qase" 1 { { 0 "sda" } } } } { "I2C_to_GPIO.v" "" { Text "D:/Altera/MAXIIZ update/Design example/AN494/quartus/I2C_to_GPIO.v" 11 -1 0 } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { sda } "NODE_NAME" } } { "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/72_cc/quartus/bin/TimingClosureFloorplan.fld" "" "" { sda } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0 "" 0}  } {  } 0 0 "Following pins have the same output enable: %1!s!" 0 0 "" 0}  } {  } 0 0 "Following groups of pins have the same output enable" 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/Altera/MAXIIZ update/Design example/AN494/quartus/I2C_to_GPIO.fit.smsg " "Info: Generated suppressed messages file D:/Altera/MAXIIZ update/Design example/AN494/quartus/I2C_to_GPIO.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 2 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 2 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "177 " "Info: Allocated 177 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Thu Nov 22 16:52:36 2007 " "Info: Processing ended: Thu Nov 22 16:52:36 2007" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}