📄 i2c_to_gpio.fit.rpt
字号:
Fitter report for I2C_to_GPIO
Thu Nov 22 16:52:35 2007
Quartus II Version 7.2 Build 151 09/26/2007 SJ Full Version
---------------------
; Table of Contents ;
---------------------
1. Legal Notice
2. Fitter Summary
3. Fitter Settings
4. Pin-Out File
5. Fitter Resource Usage Summary
6. Input Pins
7. Output Pins
8. Bidir Pins
9. I/O Bank Usage
10. All Package Pins
11. Output Pin Default Load For Reported TCO
12. Fitter Resource Utilization by Entity
13. Delay Chain Summary
14. Control Signals
15. Global & Other Fast Signals
16. Non-Global High Fan-Out Signals
17. Interconnect Usage Summary
18. LAB Logic Elements
19. LAB-wide Signals
20. LAB Signals Sourced
21. LAB Signals Sourced Out
22. LAB Distinct Inputs
23. Fitter Device Options
24. Advanced Data - General
25. Advanced Data - Placement Preparation
26. Advanced Data - Placement
27. Advanced Data - Routing
28. Fitter INI Usage
29. Fitter Messages
30. Fitter Suppressed Messages
----------------
; Legal Notice ;
----------------
Copyright (C) 1991-2007 Altera Corporation
Your use of Altera Corporation's design tools, logic functions
and other software and tools, and its AMPP partner logic
functions, and any output files from any of the foregoing
(including device programming or simulation files), and any
associated documentation or information are expressly subject
to the terms and conditions of the Altera Program License
Subscription Agreement, Altera MegaCore Function License
Agreement, or other applicable license agreement, including,
without limitation, that your use is for the sole purpose of
programming logic devices manufactured by Altera and sold by
Altera or its authorized distributors. Please refer to the
applicable agreement for further details.
+------------------------------------------------------------------+
; Fitter Summary ;
+-----------------------+------------------------------------------+
; Fitter Status ; Successful - Thu Nov 22 16:52:35 2007 ;
; Quartus II Version ; 7.2 Build 151 09/26/2007 SJ Full Version ;
; Revision Name ; I2C_to_GPIO ;
; Top-level Entity Name ; I2C_to_GPIO ;
; Family ; MAX II ;
; Device ; EPM240GT100C3 ;
; Timing Models ; Final ;
; Total logic elements ; 61 / 240 ( 25 % ) ;
; Total pins ; 18 / 80 ( 23 % ) ;
; Total virtual pins ; 0 ;
; UFM blocks ; 0 / 1 ( 0 % ) ;
+-----------------------+------------------------------------------+
+--------------------------------------------------------------------------------------------------------------------------------------+
; Fitter Settings ;
+--------------------------------------------------------------------+--------------------------------+--------------------------------+
; Option ; Setting ; Default Value ;
+--------------------------------------------------------------------+--------------------------------+--------------------------------+
; Device ; EPM240GT100C3 ; ;
; Fit Attempts to Skip ; 0 ; 0.0 ;
; Use smart compilation ; Off ; Off ;
; Maximum processors allowed for parallel compilation ; 1 ; 1 ;
; Use TimeQuest Timing Analyzer ; Off ; Off ;
; Router Timing Optimization Level ; Normal ; Normal ;
; Placement Effort Multiplier ; 1.0 ; 1.0 ;
; Router Effort Multiplier ; 1.0 ; 1.0 ;
; Always Enable Input Buffers ; Off ; Off ;
; Optimize Hold Timing ; IO Paths and Minimum TPD Paths ; IO Paths and Minimum TPD Paths ;
; Optimize Fast-Corner Timing ; Off ; Off ;
; Equivalent RAM and MLAB Paused Read Capabilities ; Care ; Care ;
; Guarantee I/O Paths Have Zero Hold Time at Fast Corner ; On ; On ;
; PowerPlay Power Optimization ; Normal compilation ; Normal compilation ;
; Optimize Timing ; Normal compilation ; Normal compilation ;
; Optimize IOC Register Placement for Timing ; On ; On ;
; Limit to One Fitting Attempt ; Off ; Off ;
; Final Placement Optimizations ; Automatically ; Automatically ;
; Fitter Aggressive Routability Optimizations ; Automatically ; Automatically ;
; Fitter Initial Placement Seed ; 1 ; 1 ;
; Slow Slew Rate ; Off ; Off ;
; PCI I/O ; Off ; Off ;
; Weak Pull-Up Resistor ; Off ; Off ;
; Enable Bus-Hold Circuitry ; Off ; Off ;
; Auto Delay Chains ; On ; On ;
; Perform Physical Synthesis for Combinational Logic for Performance ; Off ; Off ;
; Perform Register Duplication for Performance ; Off ; Off ;
; Perform Register Retiming for Performance ; Off ; Off ;
; Perform Asynchronous Signal Pipelining ; Off ; Off ;
; Fitter Effort ; Auto Fit ; Auto Fit ;
; Physical Synthesis Effort Level ; Normal ; Normal ;
; Logic Cell Insertion - Logic Duplication ; Auto ; Auto ;
; Auto Register Duplication ; Auto ; Auto ;
; Auto Global Clock ; On ; On ;
; Auto Global Register Control Signals ; On ; On ;
; Stop After Congestion Map Generation ; Off ; Off ;
; Save Intermediate Fitting Results ; Off ; Off ;
+--------------------------------------------------------------------+--------------------------------+--------------------------------+
+--------------+
; Pin-Out File ;
+--------------+
The pin-out file can be found in D:/Altera/MAXIIZ update/Design example/AN494/quartus/I2C_to_GPIO.pin.
+-----------------------------------------------------------------+
; Fitter Resource Usage Summary ;
+---------------------------------------------+-------------------+
; Resource ; Usage ;
+---------------------------------------------+-------------------+
; Total logic elements ; 61 / 240 ( 25 % ) ;
; -- Combinational with no register ; 29 ;
; -- Register only ; 0 ;
; -- Combinational with a register ; 32 ;
; ; ;
; Logic element usage by number of LUT inputs ; ;
; -- 4 input functions ; 30 ;
; -- 3 input functions ; 17 ;
; -- 2 input functions ; 12 ;
; -- 1 input functions ; 0 ;
; -- 0 input functions ; 2 ;
; ; ;
; Logic elements by mode ; ;
; -- normal mode ; 61 ;
; -- arithmetic mode ; 0 ;
; -- qfbk mode ; 0 ;
; -- register cascade mode ; 0 ;
; -- synchronous clear/load mode ; 6 ;
; -- asynchronous clear/load mode ; 2 ;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -