nandif.c

ADSV1.2可以编译的早期linux版本

#include "nandif.h"

void _NandOutData(unsigned char data)
{
	*ADDR_DATA = data;
	//_Hw_delay(1);
}

unsigned char _NandInData()
{
	unsigned char ret;

	ret = *ADDR_DATA;
	//_Hw_delay(1);
	
	return ret;
}
void _NandSetAddr(unsigned char addr)
{
	*ADDR_ADDRESS = addr;
	//_Hw_delay(1);
}
void _NandSetCmd(unsigned char cmd)
{

	*ADDR_CMDTABLE = cmd;
	//_Hw_delay(1);

}

void Nand_WriteCommand( unsigned char cmd )
{
    _HwSetCmd(cmd);
}

int Nand_ChkBusy(void)
{
	unsigned char	status;

	Nand_WriteCommand(NAND_RDSTATUS);
	/* Get Status */
	status = _HwInData();

	if((status & FLSTAT_NAND_BUSY) != 0) {
		return 0;//ok
	}
	else {
		return 1;//failed
	}
}


void Nand_ResetDevice( void )
{	
	/* Reset Command 0xff */
	Nand_WriteCommand( NAND_RST_CHIP ) ;
	/* wait Ready */
	while(Nand_ChkBusy());	
}

unsigned short Nand_ReadDevID()
{
	unsigned short ret;
	unsigned char id1,id2;
	
	/* Command 0x90 (ID read1)*/
    	Nand_WriteCommand(NAND_READ_ID) ;
	/* Set Address  0x00*/
    	_HwSetAddr(0x00) ;
	/* Read MakerID, DeviceID */
    	id1 = _HwInData() << 8 ;
    	id2 = _HwInData() ;
    	ret = (id1<<8) | id2;
    	
    	return ret;
    	
}

void Nand_SetPageAdr( unsigned long pnum)
{
    	_HwSetAddr(0x00);
	_HwSetAddr((unsigned char)pnum & 0xff) ;
    	_HwSetAddr((unsigned char)(pnum >> 8) & 0xff) ;
    	
}

void Nand_SetBlockAdr( unsigned long bnum)
{
    	unsigned short start_page;
    	
    	start_page = 32*bnum;
	_HwSetAddr((unsigned char)start_page & 0xff) ;
    	_HwSetAddr((unsigned char)(start_page >> 8) & 0xff) ;
    	
}

int Nand_BlockErase(unsigned long bnum)
{
	/* Block Erase set up */
    	Nand_WriteCommand(NAND_ERASE1);
	/* Set Block Address */
    	Nand_SetBlockAdr(bnum);
    	/* Block erase */
    	Nand_WriteCommand(NAND_ERASE2);
    	/* Check Busy */
    	while(Nand_ChkBusy());	
    
    	return 0;
}

int Nand_ReadSector(unsigned long page, unsigned char * dataBuf, unsigned char * redtBuf)
{
	int ret,i;

	/* Set Read Cmd */
   	Nand_WriteCommand(NAND_READ);
	/* Set Page Adr */
	Nand_SetPageAdr(page);
	/* Busy Check */
    	while(Nand_ChkBusy());
    	
    	/* Read data */
    	/* Command 0x0 (read1)*/
    	Nand_WriteCommand(NAND_READ1);
    	for( i = 0 ; i < 0x200 ; i++ ) 
    	{
        	dataBuf[i] = _HwInData();
    	}
    	
    	/* Read diffuseness part */
    	for( i = 0 ; i < 0x10 ; i++ )
    	{
        	redtBuf[i] = _HwInData();
    	}
    	
	return 0;
}

int Nand_WriteSector(unsigned long page, unsigned char * dataBuf, unsigned char * redtBuf)
{
	int i;
	
	/* Serial Data input cmd */
    	Nand_WriteCommand( NAND_WRDATA ) ;
	/* Set Page Adr */
    	Nand_SetPageAdr(page) ;
	/* Buffer Data Write */
    	for( i = 0 ; i < 0x200 ; i++)
    	{
        	_HwOutData(dataBuf[i]) ;
    	}
    	/* Buffer Redt Write */
    	 for( i = 0 ; i < 0x10 ; i++)
    	{
        	_HwOutData(redtBuf[i]) ;
    	}
	/* Auto Program */
    	Nand_WriteCommand( NAND_WRITE ) ;
	/* Busy Check */
    	while(Nand_ChkBusy());

    	return 0;
}

int Nand_ReadSectorRedt( unsigned long page, unsigned char * redtBuf)
{
	int i;
	
	/* Command 0x50 */
    	Nand_WriteCommand( NAND_READ_REDT ) ;
	/* Set Address */
    	Nand_SetPageAdr(page) ;
	/* Wait ready */
    	while(Nand_ChkBusy());
    	
	/* Redundunt Data Read */
    	/* Command 0x0 (read1)*/
    	Nand_WriteCommand(NAND_READ1) ;
    	for( i = 0 ; i < 0x10 ; i++ )
    	{
     		redtBuf[i] = _HwInData() ;
    	}
    
	/* Wait Ready */
    	while(Nand_ChkBusy());

    	return 0;
}

int Nand_WriteSectorRedt(unsigned long page, unsigned char * redtBuf)
{
	int i;
	
	/* Command 0x50 */
    	Nand_WriteCommand( NAND_READ_REDT ) ;
	/* Wait ready */
    	while(Nand_ChkBusy());
	/* Serial Data Input */
    	Nand_WriteCommand( NAND_WRDATA );
	/* Set address */
    	Nand_SetPageAdr(page);
    	
	/* Redundunt Data Write */
    	for( i = 0 ; i < 0x10 ; i++)
    	{
        	_HwOutData(redtBuf[i]) ;
    	}
    
	/* Auto Program */
    	Nand_WriteCommand( NAND_WRITE );
	/* Check Busy */
    	while(Nand_ChkBusy());

    	return 0;
}