sldemo_f14.mdl

This demonstration models a flight control for the longitudinal motion of a Grumman Aerospace F-14 T

# $Revision: 1.1.6.4 $
Model {
  Name			  "sldemo_f14"
  Version		  6.6
  MdlSubVersion		  0
  GraphicalInterface {
    NumRootInports	    1
    Inport {
      Name		      "u"
    }
    NumRootOutports	    2
    Outport {
      BusObject		      ""
      BusOutputAsStruct	      "off"
      SignalName	      "alpha, rad"
      Name		      "alpha, rad"
    }
    Outport {
      BusObject		      ""
      BusOutputAsStruct	      "off"
      SignalName	      "NzPilot, g"
      Name		      "Nz Pilot, g"
    }
    ParameterArgumentNames  ""
    ComputedModelVersion    "1.58"
    NumModelReferences	    0
    NumTestPointedSignals   0
  }
  Description		  "F-14 Longitudinal Flight Control\n\nThis demonstrat"
"ion models a flight control for the longitudinal motion of a Grumman Aerospac"
"e \nF-14 Tomcat.  First order linear approximations of the aircraft and actua"
"tor behavior are connected\nto an analog flight control design that uses the "
"pilot's stick pitch command as the set point for the \naircraft's pitch attit"
"ude and uses aircraft pitch angle and pitch rate to determine commands.   A "
"\nsimplified Dryden wind gust model is incorporated to perturb the system.\n"
"\nSome updates to the original f14.mdl file included in this version:\n\nThe "
"model scope for viewing signals, Scope1, was created using the Signal and Sco"
"pe Manager\nfrom the Tools menu.  The Signal and Scope Manager allows you to "
"instrument your model\nwithout having to add blocks to the model.  If you clo"
"se a model scope, such as for batch\nsimulations, you can later reopen it by "
"double-clicking the \"glasses\" icon on the signal of \ninterest.\n\nParamete"
"rs for the model are stored in a file named f14dat.m.  This file is loaded by"
" the model\ninto the model workspace.  You can view and edit data in the mode"
"l workspace directly by\nusing the Model Explorer, which is launched using th"
"e View/Model Explorer menu item or by\nlaunching it from the Model Explorer t"
"oolbar button in the Simulink editor.\n"
  SavedCharacterEncoding  "US-ASCII"
  SaveDefaultBlockParams  on
  SampleTimeColors	  off
  LibraryLinkDisplay	  "none"
  WideLines		  off
  ShowLineDimensions	  off
  ShowPortDataTypes	  off
  ShowLoopsOnError	  on
  IgnoreBidirectionalLines off
  ShowStorageClass	  off
  ShowTestPointIcons	  on
  ShowViewerIcons	  on
  SortedOrder		  off
  ExecutionContextIcon	  off
  ShowLinearizationAnnotations on
  ScopeRefreshTime	  0.035000
  OverrideScopeRefreshTime on
  DisableAllScopes	  off
  DataTypeOverride	  "UseLocalSettings"
  MinMaxOverflowLogging	  "UseLocalSettings"
  MinMaxOverflowArchiveMode "Overwrite"
  BlockNameDataTip	  off
  BlockParametersDataTip  on
  BlockDescriptionStringDataTip	off
  ToolBar		  on
  StatusBar		  on
  BrowserShowLibraryLinks off
  BrowserLookUnderMasks	  off
  Created		  "Thu Jun 25 11:54:43 1998"
  Creator		  "The MathWorks Inc."
  UpdateHistory		  "UpdateHistoryNever"
  ModifiedDateFormat	  "%<Auto>"
  LastModifiedDate	  "Sun Jan 21 18:30:27 2007"
  ModelVersionFormat	  "1.%<AutoIncrement:58>"
  ConfigurationManager	  "none"
  SimulationMode	  "normal"
  LinearizationMsg	  "none"
  Profile		  off
  ParamWorkspaceSource	  "MATLABWorkspace"
  AccelSystemTargetFile	  "accel.tlc"
  AccelTemplateMakefile	  "accel_default_tmf"
  AccelMakeCommand	  "make_rtw"
  AccelVerboseBuild	  off
  TryForcingSFcnDF	  off
  RecordCoverage	  off
  CovPath		  "/"
  CovSaveName		  "covdata"
  CovMetricSettings	  "dw"
  CovNameIncrementing	  off
  CovHtmlReporting	  on
  covSaveCumulativeToWorkspaceVar on
  CovSaveSingleToWorkspaceVar on
  CovCumulativeVarName	  "covCumulativeData"
  CovCumulativeReport	  off
  CovReportOnPause	  on
  ExtModeBatchMode	  off
  ExtModeEnableFloating	  on
  ExtModeTrigType	  "manual"
  ExtModeTrigMode	  "oneshot"
  ExtModeTrigPort	  "1"
  ExtModeTrigElement	  "any"
  ExtModeTrigDuration	  1000
  ExtModeTrigDurationFloating "auto"
  ExtModeTrigHoldOff	  0
  ExtModeTrigDelay	  0
  ExtModeTrigDirection	  "rising"
  ExtModeTrigLevel	  0
  ExtModeArchiveMode	  "off"
  ExtModeAutoIncOneShot	  off
  ExtModeIncDirWhenArm	  off
  ExtModeAddSuffixToVar	  off
  ExtModeWriteAllDataToWs off
  ExtModeArmWhenConnect	  off
  ExtModeSkipDownloadWhenConnect off
  ExtModeLogAll		  on
  ExtModeAutoUpdateStatusClock off
  BufferReuse		  off
  ProdHWDeviceType	  "32-bit Generic"
  ShowModelReferenceBlockVersion off
  ShowModelReferenceBlockIO off
  Array {
    Type		    "Handle"
    Dimension		    1
    Simulink.ConfigSet {
      $ObjectID		      1
      Version		      "1.2.0"
      Array {
	Type			"Handle"
	Dimension		7
	Simulink.SolverCC {
	  $ObjectID		  2
	  Version		  "1.2.0"
	  StartTime		  "0.0"
	  StopTime		  "60"
	  AbsTol		  "1e-6"
	  FixedStep		  "auto"
	  InitialStep		  "auto"
	  MaxNumMinSteps	  "-1"
	  MaxOrder		  5
	  ConsecutiveZCsStepRelTol "10*128*eps"
	  MaxConsecutiveZCs	  "1000"
	  ExtrapolationOrder	  4
	  NumberNewtonIterations  1
	  MaxStep		  "auto"
	  MinStep		  "auto"
	  MaxConsecutiveMinStep	  "1"
	  RelTol		  "1e-4"
	  SolverMode		  "SingleTasking"
	  Solver		  "ode45"
	  SolverName		  "ode45"
	  ZeroCrossControl	  "UseLocalSettings"
	  AlgebraicLoopSolver	  "TrustRegion"
	  SolverResetMethod	  "Fast"
	  PositivePriorityOrder	  off
	  AutoInsertRateTranBlk	  off
	  SampleTimeConstraint	  "Unconstrained"
	  RateTranMode		  "Deterministic"
	}
	Simulink.DataIOCC {
	  $ObjectID		  3
	  Version		  "1.2.0"
	  Decimation		  "1"
	  ExternalInput		  "[]"
	  FinalStateName	  "xFinal"
	  InitialState		  "[]"
	  LimitDataPoints	  off
	  MaxDataPoints		  "1000"
	  LoadExternalInput	  off
	  LoadInitialState	  off
	  SaveFinalState	  off
	  SaveFormat		  "Array"
	  SaveOutput		  on
	  SaveState		  on
	  SignalLogging		  on
	  InspectSignalLogs	  off
	  SaveTime		  on
	  StateSaveName		  "xout"
	  TimeSaveName		  "tout"
	  OutputSaveName	  "yout"
	  SignalLoggingName	  "logsout"
	  OutputOption		  "RefineOutputTimes"
	  OutputTimes		  "[]"
	  Refine		  "1"
	}
	Simulink.OptimizationCC {
	  $ObjectID		  4
	  Array {
	    Type		    "Cell"
	    Dimension		    5
	    Cell		    "ZeroExternalMemoryAtStartup"
	    Cell		    "ZeroInternalMemoryAtStartup"
	    Cell		    "InitFltsAndDblsToZero"
	    Cell		    "OptimizeModelRefInitCode"
	    Cell		    "NoFixptDivByZeroProtection"
	    PropName		    "DisabledProps"
	  }
	  Version		  "1.2.0"
	  BlockReduction	  off
	  BooleanDataType	  off
	  ConditionallyExecuteInputs off
	  InlineParams		  off
	  InlineInvariantSignals  on
	  OptimizeBlockIOStorage  off
	  BufferReuse		  off
	  EnforceIntegerDowncast  on
	  ExpressionFolding	  off
	  ExpressionDepthLimit	  2147483647
	  FoldNonRolledExpr	  on
	  LocalBlockOutputs	  off
	  RollThreshold		  5
	  SystemCodeInlineAuto	  off
	  StateBitsets		  off
	  DataBitsets		  off
	  UseTempVars		  off
	  ZeroExternalMemoryAtStartup on
	  ZeroInternalMemoryAtStartup on
	  InitFltsAndDblsToZero	  on
	  NoFixptDivByZeroProtection off
	  EfficientFloat2IntCast  off
	  OptimizeModelRefInitCode off
	  LifeSpan		  "inf"
	  BufferReusableBoundary  off
	}
	Simulink.DebuggingCC {
	  $ObjectID		  5
	  Version		  "1.2.0"
	  RTPrefix		  "error"
	  ConsistencyChecking	  "none"
	  ArrayBoundsChecking	  "none"
	  SignalInfNanChecking	  "none"
	  ReadBeforeWriteMsg	  "UseLocalSettings"
	  WriteAfterWriteMsg	  "UseLocalSettings"
	  WriteAfterReadMsg	  "UseLocalSettings"
	  AlgebraicLoopMsg	  "warning"
	  ArtificialAlgebraicLoopMsg "warning"
	  CheckSSInitialOutputMsg on
	  CheckExecutionContextPreStartOutputMsg off
	  CheckExecutionContextRuntimeOutputMsg	off
	  SignalResolutionControl "TryResolveAllWithWarning"
	  BlockPriorityViolationMsg "warning"
	  MinStepSizeMsg	  "warning"
	  TimeAdjustmentMsg	  "none"
	  MaxConsecutiveZCsMsg	  "error"
	  SolverPrmCheckMsg	  "none"
	  InheritedTsInSrcMsg	  "warning"
	  DiscreteInheritContinuousMsg "warning"
	  MultiTaskDSMMsg	  "warning"
	  MultiTaskCondExecSysMsg "none"
	  MultiTaskRateTransMsg	  "error"
	  SingleTaskRateTransMsg  "none"
	  TasksWithSamePriorityMsg "warning"
	  SigSpecEnsureSampleTimeMsg "none"
	  CheckMatrixSingularityMsg "none"
	  IntegerOverflowMsg	  "none"
	  Int32ToFloatConvMsg	  "warning"
	  ParameterDowncastMsg	  "error"
	  ParameterOverflowMsg	  "error"
	  ParameterUnderflowMsg	  "none"
	  ParameterPrecisionLossMsg "warning"
	  ParameterTunabilityLossMsg "warning"
	  UnderSpecifiedDataTypeMsg "none"
	  UnnecessaryDatatypeConvMsg "none"
	  VectorMatrixConversionMsg "none"
	  InvalidFcnCallConnMsg	  "error"
	  FcnCallInpInsideContextMsg "Use local settings"
	  SignalLabelMismatchMsg  "none"
	  UnconnectedInputMsg	  "warning"
	  UnconnectedOutputMsg	  "warning"
	  UnconnectedLineMsg	  "warning"
	  SFcnCompatibilityMsg	  "none"
	  UniqueDataStoreMsg	  "none"
	  BusObjectLabelMismatch  "warning"
	  RootOutportRequireBusObject "warning"
	  AssertControl		  "UseLocalSettings"
	  EnableOverflowDetection off
	  ModelReferenceIOMsg	  "none"
	  ModelReferenceVersionMismatchMessage "none"
	  ModelReferenceIOMismatchMessage "none"
	  ModelReferenceCSMismatchMessage "none"
	  ModelReferenceSimTargetVerbose off
	  UnknownTsInhSupMsg	  "warning"
	  ModelReferenceDataLoggingMessage "warning"
	  ModelReferenceSymbolNameMessage "warning"
	  ModelReferenceExtraNoncontSigs "error"
	  StateNameClashWarn	  "warning"
	  StrictBusMsg		  "None"
	}
	Simulink.HardwareCC {
	  $ObjectID		  6
	  Version		  "1.2.0"
	  ProdBitPerChar	  8
	  ProdBitPerShort	  16
	  ProdBitPerInt		  32
	  ProdBitPerLong	  32
	  ProdIntDivRoundTo	  "Undefined"
	  ProdEndianess		  "Unspecified"
	  ProdWordSize		  32
	  ProdShiftRightIntArith  on
	  ProdHWDeviceType	  "32-bit Generic"
	  TargetBitPerChar	  8
	  TargetBitPerShort	  16
	  TargetBitPerInt	  32
	  TargetBitPerLong	  32
	  TargetShiftRightIntArith on
	  TargetIntDivRoundTo	  "Undefined"
	  TargetEndianess	  "Unspecified"
	  TargetWordSize	  32
	  TargetTypeEmulationWarnSuppressLevel 0
	  TargetPreprocMaxBitsSint 32
	  TargetPreprocMaxBitsUint 32
	  TargetHWDeviceType	  "Specified"
	  TargetUnknown		  on
	  ProdEqTarget		  on
	}
	Simulink.ModelReferenceCC {
	  $ObjectID		  7
	  Version		  "1.2.0"
	  UpdateModelReferenceTargets "IfOutOfDateOrStructuralChange"
	  CheckModelReferenceTargetMessage "error"
	  ModelReferenceNumInstancesAllowed "Multi"
	  ModelReferencePassRootInputsByReference on
	  ModelReferenceMinAlgLoopOccurrences off
	}
	Simulink.RTWCC {
	  $BackupClass		  "Simulink.RTWCC"
	  $ObjectID		  8
	  Array {
	    Type		    "Cell"
	    Dimension		    1
	    Cell		    "IncludeHyperlinkInReport"
	    PropName		    "DisabledProps"
	  }
	  Version		  "1.2.0"
	  SystemTargetFile	  "grt.tlc"
	  GenCodeOnly		  off
	  MakeCommand		  "make_rtw"
	  GenerateMakefile	  on
	  TemplateMakefile	  "grt_default_tmf"
	  Description		  "Generic Real-Time Target"
	  GenerateReport	  off
	  SaveLog		  off
	  RTWVerbose		  on
	  RetainRTWFile		  off
	  ProfileTLC		  off
	  TLCDebug		  off
	  TLCCoverage		  off
	  TLCAssert		  off
	  ProcessScriptMode	  "Default"
	  ConfigurationMode	  "Optimized"
	  ConfigAtBuild		  off
	  IncludeHyperlinkInReport off
	  LaunchReport		  off
	  TargetLang		  "C"
	  IncludeBusHierarchyInRTWFileBlockHierarchyMap	off
	  IncludeERTFirstTime	  on
	  Array {
	    Type		    "Handle"
	    Dimension		    2
	    Simulink.CodeAppCC {
	      $ObjectID		      9
	      Array {
		Type			"Cell"
		Dimension		9
		Cell			"IgnoreCustomStorageClasses"
		Cell			"InsertBlockDesc"
		Cell			"SFDataObjDesc"
		Cell			"SimulinkDataObjDesc"
		Cell			"DefineNamingRule"
		Cell			"SignalNamingRule"
		Cell			"ParamNamingRule"
		Cell			"InlinedPrmAccess"
		Cell			"CustomSymbolStr"
		PropName		"DisabledProps"
	      }
	      Version		      "1.2.0"
	      ForceParamTrailComments off
	      GenerateComments	      on
	      IgnoreCustomStorageClasses on
	      IncHierarchyInIds	      off
	      MaxIdLength	      31
	      PreserveName	      off
	      PreserveNameWithParent  off
	      ShowEliminatedStatement off
	      IncAutoGenComments      off
	      SimulinkDataObjDesc     off
	      SFDataObjDesc	      off
	      IncDataTypeInIds	      off
	      PrefixModelToSubsysFcnNames on
	      MangleLength	      1
	      CustomSymbolStrGlobalVar "$R$N$M"
	      CustomSymbolStrType     "$N$R$M"
	      CustomSymbolStrField    "$N$M"
	      CustomSymbolStrFcn      "$R$N$M$F"
	      CustomSymbolStrBlkIO    "rtb_$N$M"
	      CustomSymbolStrTmpVar   "$N$M"
	      CustomSymbolStrMacro    "$R$N$M"
	      DefineNamingRule	      "None"
	      ParamNamingRule	      "None"
	      SignalNamingRule	      "None"
	      InsertBlockDesc	      off
	      SimulinkBlockComments   on
	      EnableCustomComments    off
	      InlinedPrmAccess	      "Literals"
	      ReqsInCode	      off
	    }
	    Simulink.GRTTargetCC {
	      $BackupClass	      "Simulink.TargetCC"
	      $ObjectID		      10
	      Array {
		Type			"Cell"
		Dimension		12
		Cell			"IncludeMdlTerminateFcn"
		Cell			"CombineOutputUpdateFcns"
		Cell			"SuppressErrorStatus"
		Cell			"ERTCustomFileBanners"
		Cell			"GenerateSampleERTMain"
		Cell			"MultiInstanceERTCode"
		Cell			"PurelyIntegerCode"
		Cell			"SupportNonFinite"
		Cell			"SupportComplex"
		Cell			"SupportAbsoluteTime"
		Cell			"SupportContinuousTime"
		Cell			"SupportNonInlinedSFcns"
		PropName		"DisabledProps"
	      }
	      Version		      "1.2.0"
	      TargetFcnLib	      "ansi_tfl_tmw.mat"
	      TargetLibSuffix	      ""
	      TargetPreCompLibLocation ""
	      GenFloatMathFcnCalls    "ANSI_C"
	      UtilityFuncGeneration   "Auto"
	      GenerateFullHeader      on
	      GenerateSampleERTMain   off
	      GenerateTestInterfaces  off
	      IsPILTarget	      off
	      ModelReferenceCompliant on
	      IncludeMdlTerminateFcn  on
	      CombineOutputUpdateFcns off
	      SuppressErrorStatus     off
	      IncludeFileDelimiter    "Auto"
	      ERTCustomFileBanners    off
	      SupportAbsoluteTime     on
	      LogVarNameModifier      "rt_"
	      MatFileLogging	      on
	      MultiInstanceERTCode    off
	      SupportNonFinite	      on
	      SupportComplex	      on
	      PurelyIntegerCode	      off
	      SupportContinuousTime   on
	      SupportNonInlinedSFcns  on
	      EnableShiftOperators    on
	      ParenthesesLevel	      "Nominal"
	      PortableWordSizes	      off
	      ModelStepFunctionPrototypeControlCompliant off
	      ExtMode		      off
	      ExtModeStaticAlloc      off
	      ExtModeTesting	      off
	      ExtModeStaticAllocSize  1000000
	      ExtModeTransport	      0
	      ExtModeMexFile	      "ext_comm"
	      RTWCAPISignals	      off
	      RTWCAPIParams	      off
	      RTWCAPIStates	      off
	      GenerateASAP2	      off
	    }
	    PropName		    "Components"
	  }
	}
	PropName		"Components"
      }
      Name		      "Configuration"
      CurrentDlgPage	      "Solver"
    }
    PropName		    "ConfigurationSets"
  }
  Simulink.ConfigSet {
    $PropName		    "ActiveConfigurationSet"
    $ObjectID		    1
  }
  WSMCode		  "f14dat\n"
  WSMdlFileData		  "DataTag0"
  BlockDefaults {
    Orientation		    "right"
    ForegroundColor	    "black"
    BackgroundColor	    "white"
    DropShadow		    off
    NamePlacement	    "normal"
    FontName		    "Helvetica"
    FontSize		    10
    FontWeight		    "normal"
    FontAngle		    "normal"
    ShowName		    on
  }
  BlockParameterDefaults {
    Block {
      BlockType		      Constant
      Value		      "1"
      VectorParams1D	      on
      SamplingMode	      "Sample based"
      OutDataTypeMode	      "Inherit from 'Constant value'"
      OutDataType	      "sfix(16)"
      ConRadixGroup	      "Use specified scaling"
      OutScaling	      "2^0"
      SampleTime	      "inf"
      FramePeriod	      "inf"
    }
    Block {
      BlockType		      Gain
      Gain		      "1"
      Multiplication	      "Element-wise(K.*u)"
      ParameterDataTypeMode   "Same as input"
      ParameterDataType	      "sfix(16)"
      ParameterScalingMode    "Best Precision: Matrix-wise"
      ParameterScaling	      "2^0"
      OutDataTypeMode	      "Same as input"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      LockScale		      off
      RndMeth		      "Floor"
      SaturateOnIntegerOverflow	on
      SampleTime	      "-1"
    }
    Block {
      BlockType		      Inport
      Port		      "1"
      UseBusObject	      off
      BusObject		      "BusObject"
      BusOutputAsStruct	      off
      PortDimensions	      "-1"
      SampleTime	      "-1"
      DataType		      "auto"
      OutDataType	      "sfix(16)"
      OutScaling	      "2^0"
      SignalType	      "auto"
      SamplingMode	      "auto"
      LatchByDelayingOutsideSignal off