📄 lpc_config.h
字号:
/* * Copyright 2006 Anthony Rowe and Adam Goode * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * *//* System Config *//* PLL - Main clock F_OSC=14,7MHz @ Olimex LPC-P2129) [limits: 10 MHz to 25 MHz] - System should run at max. Frequency (60MHz) [limit: max 60 MHz] - Choose multiplier M=4 so cclk = M * F_OSC= 4 * 14745000Hz = 58980000 Hz - MSEL-Bits in PLLCFG (bits 0-4) MSEL = M-1 - F_CCO must be inbetween the limits 156 MHz to 320 MHz datasheet: F_CCO = F_OSC * M * 2 * P - choose devider P=2 => F_CCO = 14745000Hz * 4 * 2 * 2 = 235920000 ~=236 MHz - PSEL0 (Bit5 in PLLCFG) = 1, PSEL1 (Bit6) = 0 (0b01)*/#define FOSC 14745000#define PLL_M 4#define MSEL (PLL_M-1)#define PSEL0 5#define PSEL1 6#define PLLE 0#define PLLC 1#define PLOCK 10#define PLL_FEED1 0xAA#define PLL_FEED2 0x55/* MAM(Memory Accelerator Module) - choosen: MAM fully enabled = MAM-Mode 2 - System-Clock cclk=59MHz -> 3 CCLKs are proposed as fetch timing*/#define MAM_MODE 2#define MAM_FETCH 3/* VPB (V... Pheriphal Bus) - choosen: VPB should run at full speed -> devider VPBDIV=1 => pclk = cclk = 59MHz*/#define VPBDIV_VAL 1// FIXME should be 1/* SCB*/#define MEMMAP_BOOT_LOADER_MODE 0 // Interrupt vectors are re-mapped to Boot Block.#define MEMMAP_USER_FLASH_MODE (1<<0) // Interrupt vectors are not re-mapped and reside in Flash.#define MEMMAP_USER_RAM_MODE (1<<1) // Interrupt vectors are re-mapped to Static RAM.
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -