small_counter.vhd

以太网PHY端口MII物理层收发程序

-- megafunction wizard: %LPM_COUNTER%
-- GENERATION: STANDARD
-- VERSION: WM1.0
-- MODULE: lpm_counter 

-- ============================================================
-- File Name: small_counter.vhd
-- Megafunction Name(s):
-- 			lpm_counter
-- ============================================================
-- ************************************************************
-- THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
-- ************************************************************


--Copyright (C) 1991-2002 Altera Corporation
--Any  megafunction  design,  and related netlist (encrypted  or  decrypted),
--support information,  device programming or simulation file,  and any other
--associated  documentation or information  provided by  Altera  or a partner
--under  Altera's   Megafunction   Partnership   Program  may  be  used  only
--to program  PLD  devices (but not masked  PLD  devices) from  Altera.   Any
--other  use  of such  megafunction  design,  netlist,  support  information,
--device programming or simulation file,  or any other  related documentation
--or information  is prohibited  for  any  other purpose,  including, but not
--limited to  modification,  reverse engineering,  de-compiling, or use  with
--any other  silicon devices,  unless such use is  explicitly  licensed under
--a separate agreement with  Altera  or a megafunction partner.  Title to the
--intellectual property,  including patents,  copyrights,  trademarks,  trade
--secrets,  or maskworks,  embodied in any such megafunction design, netlist,
--support  information,  device programming or simulation file,  or any other
--related documentation or information provided by  Altera  or a megafunction
--partner, remains with Altera, the megafunction partner, or their respective
--licensors. No other licenses, including any licenses needed under any third
--party's intellectual property, are provided herein.


LIBRARY ieee;
USE ieee.std_logic_1164.all;

LIBRARY lpm;
USE lpm.lpm_components.all;

ENTITY small_counter IS
	PORT
	(
		clock		: IN STD_LOGIC ;
		aclr		: IN STD_LOGIC ;
		q		: OUT STD_LOGIC_VECTOR (3 DOWNTO 0)
	);
END small_counter;


ARCHITECTURE SYN OF small_counter IS

	SIGNAL sub_wire0	: STD_LOGIC_VECTOR (3 DOWNTO 0);



	COMPONENT lpm_counter
	GENERIC (
		lpm_width		: NATURAL;
		lpm_type		: STRING;
		lpm_direction		: STRING
	);
	PORT (
			aclr	: IN STD_LOGIC ;
			clock	: IN STD_LOGIC ;
			q	: OUT STD_LOGIC_VECTOR (3 DOWNTO 0)
	);
	END COMPONENT;

BEGIN
	q    <= sub_wire0(3 DOWNTO 0);

	lpm_counter_component : lpm_counter
	GENERIC MAP (
		lpm_width => 4,
		lpm_type => "LPM_COUNTER",
		lpm_direction => "UP"
	)
	PORT MAP (
		aclr => aclr,
		clock => clock,
		q => sub_wire0
	);



END SYN;

-- ============================================================
-- CNX file retrieval info
-- ============================================================
-- Retrieval info: PRIVATE: nBit NUMERIC "4"
-- Retrieval info: PRIVATE: Direction NUMERIC "0"
-- Retrieval info: PRIVATE: CLK_EN NUMERIC "0"
-- Retrieval info: PRIVATE: CNT_EN NUMERIC "0"
-- Retrieval info: PRIVATE: ModulusCounter NUMERIC "0"
-- Retrieval info: PRIVATE: ModulusValue NUMERIC "0"
-- Retrieval info: PRIVATE: CarryIn NUMERIC "0"
-- Retrieval info: PRIVATE: CarryOut NUMERIC "0"
-- Retrieval info: PRIVATE: SCLR NUMERIC "0"
-- Retrieval info: PRIVATE: SLOAD NUMERIC "0"
-- Retrieval info: PRIVATE: SSET NUMERIC "0"
-- Retrieval info: PRIVATE: SSET_ALL1 NUMERIC "1"
-- Retrieval info: PRIVATE: SSETV NUMERIC "0"
-- Retrieval info: PRIVATE: ACLR NUMERIC "1"
-- Retrieval info: PRIVATE: ALOAD NUMERIC "0"
-- Retrieval info: PRIVATE: ASET NUMERIC "0"
-- Retrieval info: PRIVATE: ASET_ALL1 NUMERIC "1"
-- Retrieval info: PRIVATE: ASETV NUMERIC "0"
-- Retrieval info: CONSTANT: LPM_WIDTH NUMERIC "4"
-- Retrieval info: CONSTANT: LPM_TYPE STRING "LPM_COUNTER"
-- Retrieval info: CONSTANT: LPM_DIRECTION STRING "UP"
-- Retrieval info: USED_PORT: clock 0 0 0 0 INPUT NODEFVAL clock
-- Retrieval info: USED_PORT: q 0 0 4 0 OUTPUT NODEFVAL q[3..0]
-- Retrieval info: USED_PORT: aclr 0 0 0 0 INPUT NODEFVAL aclr
-- Retrieval info: CONNECT: @clock 0 0 0 0 clock 0 0 0 0
-- Retrieval info: CONNECT: q 0 0 4 0 @q 0 0 4 0
-- Retrieval info: CONNECT: @aclr 0 0 0 0 aclr 0 0 0 0
-- Retrieval info: LIBRARY: lpm lpm.lpm_components.all