mcbsp1cfg_c.c

基于U（375）盘及SD（SPI模式）卡集成文件系统（包括底层驱动）

/*   Do *not* directly modify this file.  It was    */
/*   generated by the Configuration Tool; any  */
/*   changes risk being overwritten.                */

/* INPUT mcbsp1.cdb */

/*  Include Header File  */
#include "mcbsp1cfg.h"


#ifdef __cplusplus
#pragma CODE_SECTION(".text:CSL_cfgInit")
#else
#pragma CODE_SECTION(CSL_cfgInit,".text:CSL_cfgInit")
#endif


#ifdef __cplusplus
#pragma FUNC_EXT_CALLED()
#else
#pragma FUNC_EXT_CALLED(CSL_cfgInit)
#endif

/*  Config Structures */
EMIFA_Config emifaCfg0 = {
    0x0009207C,        /*  Global Control Reg. (GBLCTL)   */
    0xFFFFFF23,        /*  CE0 Space Control Reg. (CECTL0)   */
    0xFFFFFF23,        /*  CE1 Space Control Reg. (CECTL1)   */
    0x9279C91B,        /*  CE2 Space Control Reg. (CECTL2)   */
    0xFFFFFF23,        /*  CE3 Space Control Reg. (CECTL3)   */
    0x0348F000,        /*  SDRAM Control Reg.(SDCTL)   */
    0x005DC5DC,        /*  SDRAM Timing Reg.(SDTIM)   */
    0x00175F3F,        /*  SDRAM Extended Reg.(SDEXT)   */
    0x00000002,        /*  CE0 Space Secondary Control Reg. (CESEC0)  */
    0x00000002,        /*  CE1 Space Secondary Control Reg. (CESEC1)  */
    0x00000042,        /*  CE2 Space Secondary Control Reg. (CESEC2)  */
    0x00000002         /*  CE3 Space Secondary Control Reg. (CESEC3)  */
};

MCBSP_Config mcbspCfg0 = {
    0x00000000,        /*  Serial Port Control Reg. (SPCR)   */
    0x00000000,        /*  Receiver Control Reg. (RCR)   */
    0x00000000,        /*  Transmitter Control Reg. (XCR)   */
    0x20000001,        /*  Sample-Rate Generator Reg. (SRGR)   */
    0x00000000,        /*  Multichannel Control Reg. (MCR)   */
    0x00000000,        /*  Enhanced Receiver Channel Enable(RCERE0)   */
    0x00000000,        /*  Enhanced Receiver Channel Enable(RCERE1)   */
    0x00000000,        /*  Enhanced Receiver Channel Enable(RCERE2)   */
    0x00000000,        /*  Enhanced Receiver Channel Enable(RCERE3)   */
    0x00000000,        /*  Enhanced Transmitter Channel Enable(XCERE0)   */
    0x00000000,        /*  Enhanced Transmitter Channel Enable(XCERE1)   */
    0x00000000,        /*  Enhanced Transmitter Channel Enable(XCERE2)   */
    0x00000000,        /*  Enhanced Transmitter Channel Enable(XCERE3)   */
    0x00000000         /*  Pin Control Reg. (PCR)   */
};

/*  Handles  */

/*
 *  ======== CSL_cfgInit() ========  
 */
void CSL_cfgInit()
{
}