📄 _impact.log
字号:
iMPACT Version:
iMPACT log file Started on Fri Sep 21 08:51:36 2007
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setMode -bs
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
PROGRESS_START - Starting Operation.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 7.0.0.0. LPT base address = 0378h.
ECP base address = 0778h.
Cable connection failed.
Connecting to cable (Parallel Port - LPT2).
Checking cable driver.
Driver windrvr6.sys version = 7.0.0.0.Cable connection failed.
Connecting to cable (Parallel Port - LPT3).
Checking cable driver.
Driver windrvr6.sys version = 7.0.0.0.Cable connection failed.
Connecting to cable (Parallel Port - LPT4).
Checking cable driver.
Driver windrvr6.sys version = 7.0.0.0.Cable connection failed.
Connecting to cable (Usb Port - USB21).
Checking cable driver.
Driver xusbdfwu.sys version: 1021 (1021).
Driver windrvr6.sys version = 7.0.0.0. Cable PID = 0008.
Max current requested during enumeration is 280 mA.
Cable Type = 3, Revision = 0.
Setting cable speed to 6 MHz.
Cable connection established.
Firmware version = 1021.
CPLD file version = 0012h.
CPLD version = 0012h.
PROGRESS_END - End Operation.
Elapsed time = 2 sec.
Attempting to identify devices in the boundary-scan chain configuration...// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc2c64a, Version : 0
INFO:iMPACT:1777 -
Reading C:/Xilinx/xbr/data/xc2c64a.bsd...
INFO:iMPACT:501 - '1': Added Device xc2c64a successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID =Xilinx xcf04s, Version : 15
INFO:iMPACT:1777 -
Reading C:/Xilinx/xcf/data/xcf04s.bsd...
INFO:iMPACT:501 - '1': Added Device xcf04s successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'3': : Manufacturer's ID =Xilinx xc3s500e, Version : 0
INFO:iMPACT:1777 -
Reading C:/Xilinx/spartan3e/data/xc3s500e.bsd...
INFO:iMPACT:501 - '1': Added Device xc3s500e successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 10000000.
Chain TCK freq = 10000000.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Xilinx/spartan3E/jupiter/LCD/lcd1602.bit"
'1': Loading file 'C:/Xilinx/spartan 3E/jupiter/LCD/lcd1602.bit' ...
done.
WARNING:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s500e successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 -defaultVersion 0
PROGRESS_START - Starting Operation.
Chain TCK freq = 10000000.
Chain TCK freq = 10000000.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming device...
done.
'1': Reading status register contents...
CRC error : 0
Decryptor security set : 0
DCM locked : 1
DCI matched : 1
legacy input error : 0
status of GTS_CFG_B : 1
status of GWE : 1
status of GHIGH : 1
value of MODE pin M0 : 0
value of MODE pin M1 : 0
value of MODE pin M2 : 0
value of CFG_RDY (INIT_B) : 1
DONEIN input from DONE pin : 1
IDCODE not validated while trying to write FDRI : 0
write FDRI issued before or after decrypt operation: 0
Decryptor keys not used in proper sequence : 0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 0111 0001 1000 0000 0000 0000 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
Attempting to identify devices in the boundary-scan chain configuration...// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc2c64a, Version : 0
INFO:iMPACT:1777 -
Reading C:/Xilinx/xbr/data/xc2c64a.bsd...
INFO:iMPACT:501 - '1': Added Device xc2c64a successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID =Xilinx xcf04s, Version : 15
INFO:iMPACT:1777 -
Reading C:/Xilinx/xcf/data/xcf04s.bsd...
INFO:iMPACT:501 - '1': Added Device xcf04s successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'3': : Manufacturer's ID =Xilinx xc3s500e, Version : 0
INFO:iMPACT:1777 -
Reading C:/Xilinx/spartan3e/data/xc3s500e.bsd...
INFO:iMPACT:501 - '1': Added Device xc3s500e successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 10000000.
Chain TCK freq = 10000000.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : identifyMPM
// *** BATCH CMD : assignFile -p 1 -file "C:/Xilinx/spartan3E/jupiter/LCD/lcd1602.bit"
'1': Loading file 'C:/Xilinx/spartan 3E/jupiter/LCD/lcd1602.bit' ...
done.
WARNING:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '1': Added Device xc3s500e successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 1 -defaultVersion 0
PROGRESS_START - Starting Operation.
Chain TCK freq = 10000000.
Chain TCK freq = 10000000.
Validating chain...
Boundary-scan chain validated successfully.
'1':Programming device...
done.
'1': Reading status register contents...
CRC error : 0
Decryptor security set : 0
DCM locked : 1
DCI matched : 1
legacy input error : 0
status of GTS_CFG_B : 1
status of GWE : 1
status of GHIGH : 1
value of MODE pin M0 : 0
value of MODE pin M1 : 0
value of MODE pin M2 : 0
value of CFG_RDY (INIT_B) : 1
DONEIN input from DONE pin : 1
IDCODE not validated while trying to write FDRI : 0
write FDRI issued before or after decrypt operation: 0
Decryptor keys not used in proper sequence : 0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 0111 0001 1000 0000 0000 0000 0000
INFO:iMPACT:579 - '1': Completed downloading bit file to device.
INFO:iMPACT:580 - '1':Checking done pin ....done.
'1': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : saveProjectFile -file "C:/Xilinx/spartan3E/jupiter/LCD/LCD.ipf"
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -